Influence of halogen content in mixed halide perovskite solar cells on cell performances through device simulation
Source abstract
Abstract
Impact of halogen content in FA(0.85)MA(0.15)Pb(I1-xBrx)(3) absorbing layers of the perovskite solar cells (PSC) was investigated through numerical simulation, where the halogen content which is the Br/(Br + I) compositional ratio affects their bandgap (E-g). In this contribution, the E-g was varied from 1.48 to 1.70 eV for the different E-g grading through the variation of the Br/(Br + I) compositional ratio from 0 to 0.25, respectively. The E-g grading is defined as (E-g at front - E-g at back)/perovskite thickness. The E-g values at front and back are the E-g values of the perovskite absorber at light incident side and back side, respectively. It is demonstrated that the open-circuit voltage is significantly increased under the positive E-g grading because of the enhancement of the carrier separation. On the other hand, the short-circuit current density is enhanced under both negative and positive E-g grading owing to the improved efficient use of the broader solar spectrum. Ultimately, the highest power conversion efficiency of the PSC is demonstrated when the positive E-g grading consists of the E-g of 1.61 eV at front (Br/(Br + I) of 0.15) and the E-g of 1.48 eV at back (Br/(Br + I) of 0.00). Moreover, the effect of the carrier diffusion length is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Background and motivation for thin-film solar-cell development
2. Epitaxial thin film crystalline silicon solar cells on low cost silicon carriers
3. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
4. 6.5% efficient perovskite quantum-dot-sensitized solar cell10.1039/c1nr10867k ↗
5. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
6. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
7. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell10.1021/jz400892a ↗
8. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
9. Double-edged sword effects of cation rotation and additive passivation on perovskite solar cell performance: an ab initio investigation10.1016/j.solmat.2018.07.011 ↗
10. Enhanced performance and stability of inverted planar perovskite solar cells by incorporating 1,6-diaminohexane dihydrochloride additive10.1016/j.solmat.2018.07.031 ↗
11. Quantifying energy losses in planar perovskite solar cells10.1016/j.solmat.2017.09.002 ↗
12. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
13. Reducing saturation‐current density to realize high‐efficiency low‐bandgap mixed tin–lead halide perovskite solar cells10.1002/aenm.201803135 ↗
14. Investigating relation of photovoltaic factors with properties of perovskite films based on various solvents10.1016/j.nanoen.2015.12.013 ↗
15. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
16. Efficiency, stable and scalable perovskite solar cells using poly(3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
17. Solar cell efficiency tables (version 54)10.1002/pip.3171 ↗
18. Formamidinium-containing metal-halide: an Alternative material for near-IR absorption perovskite solar cells10.1021/jp411112k ↗
19. NH2CH=NH2PbI3: an alternative organolead iodide perovskite sensitizer for mesoscopic solar cells10.1021/cm404006p ↗
20. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
21. Efficient, semitransparent neutral-colored solar cells based on microstructured formamidinium lead trihalide perovskite10.1021/jz502367k ↗
22. Stable α/ẟ phase junction of formamidinium lead iodide perovskites for enhanced near-infrared emission10.1039/C6SC03542F ↗
23. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
24. Control of Ga distribution in Cu(In,Ga)Se2 photovoltaic absorber by solid-state selenization of CuGa/In/Se/In/CuGa stack, Jpn10.1143/JJAP.51.10NC21 ↗
25. Optimum bandgap profile analysis of Cu(In,Ga)Se2 solar cells with various defect densities by SCAPS10.7567/JJAP.53.04ER14 ↗
26. Control back slope of Ga/(In+Ga) profile in Cu(In,Ga)Se2 absorber fabricated by multi layer precursor method for improvement of its photovoltaic performances10.1016/j.solmat.2014.11.023 ↗
27. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
28. Simulation of optimum band-gap grading profile of Cu2ZnSn(S,Se)4 solar cells with different optical and defect properties10.7567/JJAP.53.071201 ↗
29. Band alignment of MAPb(I1–xBrx)3 thin films by vacuum deposition10.1063/1.4972032 ↗
30. Burgelman · 2000 · 527
31. Numerical reproduction of a perovskite solar cell by device simulation considering band gap grading10.1016/j.optmat.2019.03.048 ↗
32. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
33. New tin(II) fluoride derivative as a precursor for enhancing the efficiency of inverted planar tin/lead perovskite solar cells10.1021/acs.jpcc.8b09609 ↗