Design and fabrication of freeform glass concentrating mirrors using a high volume thermal slumping process
Source abstract
Abstract
Abstract Concentrated photovoltaics (CPV) power is a form of clean and renewable energy. However, the cost of harvesting solar energy is still economically prohibitive as compared to more traditional electricity generation methods such as hydroelectric or fossil fuel power. In this study, an innovative, high volume but low cost thermal slumping process was proposed as an alternative method for manufacturing of glass mirrors for high concentration photovoltaic system. In this paper, first a freeform optical design was performed to create a two-stage concentrator with ±1° acceptance angle and uniform output irradiance. Ray-tracing simulation was performed to evaluate the optical design. A machinable ceramic, MACOR®, was tested as mold material for its preferred mechanical and chemical stability at high temperature conditions. To assist the development of the slumping process, finite element method (FEM) simulation was performed to compensate for the mold design for manufacturing errors in this process. Moreover, surface profile and surface roughness were measured to characterize the thermal slumping process. Different manufacturing parameters were tested to identify the proper slumping conditions. It is discovered that surface roughness of the inner surface of the slumped glass mirror remained unchanged after slumping under a pre-determined soaking temperature. This study established a methodology for low cost, high volume glass optics for possible solar concentrator applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced optical system design · Adaptive optics and wavefront sensing · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Stine · 1985
2. Toward cost-effective solar energy use10.1126/science.1137014 ↗
3. Winston · 2004
4. R. McConnell, M. Symko-Davies, Multijunction photovoltaic technologies for high performance concentrators, in: Proceedings of the IEEE 4th World Conference on Photovoltaic Energy Conversion (WCPEC-4), 1 (2006), 733–736.
5. Luque · 2007
6. P. Benitez, A. Cvetkovic, R. Winston, G. Diaz, L. Reed, J. Cisneros, A. Tovar, A. Ritschel, J. Wright, High concentration mirror based Kohler integrating system for tandem solar cells, in: Proceedings of the IEEE 4th World Conference on Photovoltaic Energy Conversion (WCPEC-4), 1 (2006), 690–693.
7. A. Cvetković, M. Hernández, P. Benitez, J.C. Miñano, R. Mohedano, The XR nonimaging photovoltaic concentrator, in: Proceedings of the Workshop on Concentrating Photovoltaic Power Plants: Optical Design and Grid Connection, Marburg, Germany, October 11–12, 2007.10.1117/12.736897 ↗
8. V. Diaz, J.L. Alvarez, M.A. Bofill, J. Lopez Zurita, J. Cabrera, E. Rodriguez, C. Mateos, HCPV pilot installations: ISOFOTON technology for market penetration, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, September 3–7, 2007.
9. P. Gleckman, Rooftop photovoltaic system using high concentration: an optical perspective, in: Proceedings of the Workshop on Concentrating Photovoltaic Power Plants: Optical Design and Grid Connection, Marburg, Germany, October 11–12, 2007.
10. Compression molding of aspherical glass lenses—a combined experimental and numerical analysis10.1111/j.1551-2916.2005.00137.x ↗
11. Slow slumping of a very viscous liquid bridge10.1023/A:1004200926153 ↗
12. Concentrator design to minimize LCOE10.1117/12.735738 ↗
13. Thermal forming of glass microsheets for x-ray telescope mirror segments10.1364/AO.42.000724 ↗
14. Development of mirror segments for the constellation-X observatory10.1117/12.461421 ↗
15. Simultaneous multiple surface optical design method in three dimensions10.1117/1.1752918 ↗
16. Nonimaging optics: concentration and illumination
17. Chapra · 2006
18. Composite coating materials for the moulding of diffractive and refractive optical components of inorganic glasses10.1016/S0257-8972(02)00658-8 ↗
19. A. Jain, Experimental Study and Numerical Analysis of Compression Molding Process for Manufacturing Precision Aspherical Glass Lenses, The Ohio State University, Ph.D. Dissertation, 2006.
20. 〈http://www.corning.com/docs/specialtymaterials/pisheets/Macor.pdf〉
21. A precision laboratory apparatus for high temperature compression molding of glass lenses10.1063/1.1921367 ↗
22. Analysis of recent measurements of the viscosity of glasses10.1111/j.1151-2916.1925.tb16731.x ↗
23. Analysis of recent measurements of the viscosity of glasses10.1111/j.1151-2916.1925.tb18582.x ↗
24. Numerical simulation assisted curve compensation in compression molding of high precision aspherical glass lenses10.1115/1.3063652 ↗
25. Viscosity measurement by cylindrical compression for numerical modeling of precision lens molding process10.1111/j.1551-2916.2005.00477.x ↗
26. Numerical simulation and experimental study of residual stresses in compression molding of precision glass optical components10.1115/1.2950062 ↗