journal article·2012-12

Fully water-processable metal oxide nanorods/polymer hybrid solar cells

Linny Baeten, Bert Conings, Jan D’Haen, An Hardy, Jean V. Manca, Marlies K. Van Bael

Publisher page

Abstract

Abstract Hybrid solar cells based on metal oxides in combination with semiconducting polymers are offering potential as future low-cost and upscalable photovoltaics. However, the use of toxic solvents such as chlorobenzene, chloroform or toluene for the polymer processing, remains a drawback. In an effort to attain the summit of environmentally friendly device fabrication, in this work, fully water-based hybrid solar cells are fabricated. Metal oxide nanorod arrays, prepared via an aqueous synthesis, are used as electron acceptors, while the need for toxic solvents in polymer processing is circumvented by replacing the widely used poly(3-hexylthiophene-2,5-diyl) (P3HT) with its water-soluble counterpart poly(3-(potassium-4-hexanoate)thiophene-2,5-diyl) (P3PHT). Comparing two deposition techniques and two metal oxides leads to a promising efficiency of 0.2% for drop casted P3PHT in combination with rutile TiO 2 nanorod arrays, and demonstrates the possibility to develop fully ‘green’ nanorod based hybrid solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Organic-based photovoltaics. toward low-cost power generation10.1557/mrs2005.2 ↗
2. Polymer-fullerene bulk heterojunction solar cells10.1088/0034-4885/73/9/096401 ↗
3. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
4. The effect of three-dimensional morphology on the efficiency of hybrid polymer solar cells10.1038/nmat2533 ↗
5. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
6. Molecular understanding of organic solar cells: the challenges10.1021/ar900099h ↗
7. Facile external treatment for efficient nanoscale morphology control of polymer solar cells using a gas-assisted spray method10.1039/c0jm03899g ↗
8. Synthesis and characterization of ZnO nanowires and their integration into dye-sensitized solar cells10.1088/0957-4484/17/11/S13 ↗
9. Nanowire dye-sensitized solar cells10.1038/nmat1387 ↗
10. Hybrid polymer solar cells based on zinc oxide10.1039/b501979f ↗
11. Hybrid polymer/zinc oxide photovoltaic devices with vertically oriented ZnO nanorods and an amphiphilic molecular interface layer10.1021/jp0571372 ↗
12. Hybrid photovoltaic devices of polymer and ZnO nanofiber composites10.1016/j.tsf.2005.08.179 ↗
13. Towards efficient hybrid solar cells based on fully polymer infiltrated ZnO nanorod arrays10.1002/adma.201100414 ↗
14. Vertically-aligned nanostructures of ZnO for excitonic solar cells: a review.10.1039/B811536B ↗
15. ZnO—nanostructures, defects, and devices10.1016/S1369-7021(07)70078-0 ↗
16. Synthesis and characterization of water-soluble poly(p-phenylene vinylene) derivatives via the dithiocarbamate precursor route10.1016/j.eurpolymj.2011.06.014 ↗
17. Water-soluble polythiophene/nanocrystalline TiO2 solar cells10.1063/1.1900300 ↗
18. Hybrid solar cells from water-soluble polymers10.1155/IJP/2006/20951 ↗
19. On the origin of charge generation in hybrid TiOx/conjugated polymer photovoltaic devices10.1021/jp209016z ↗
20. Green polymer solar cell based on water-soluble poly [3-(potassium-6-hexanoate) thiophene-2, 5-diyl] and aqueous-dispersible noncovalent functionalized graphene sheets10.1016/j.solmat.2011.09.023 ↗
21. Water based preparation method for ‘green’ solid-state polythiophene solar cells10.1016/j.tsf.2007.12.023 ↗
22. Organic/inorganic polymer solar cells using a buffer layer from all-water-solution processing10.1021/jp7115615 ↗
23. Opto-electrical and morphological characterization of water soluble conjugated polymers for eco-friendly hybrid solar cells10.1016/j.solmat.2011.07.010 ↗
24. Synthesis of thin dense titania films via an aqueous solution–gel method10.1007/s10971-006-0123-8 ↗
25. Growth of oriented single-crystalline rutile TiO2 nanorods on transparent conducting substrates for dye-sensitized solar cells.10.1021/ja8078972 ↗
26. Enhanced efficiency of dye-sensitized solar cells through TiCl(4)-treated, nanoporous-layer-covered TiO(2) nanotube arrays10.1016/j.jpowsour.2011.06.063 ↗
27. L. Baeten, B. Conings, J. D’Haen, C. De Dobbelaere, A. Hardy, J.V. Manca, M.K. Van Bael, Tuning the dimensions of ZnO nanorod arrays for application in hybrid photovoltaics, A European Journal of Chemical Physics and Physical Chemistry, http://dx.doi.org/10.1002/cphc.201200102, accepted for publication.10.1002/cphc.201200102 ↗
28. Systematic investigation of the role of compact TiO2 layer in solid state dye-sensitized TiO2 solar cells10.1016/j.ccr.2004.02.008 ↗
29. Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
30. Photo-induced electron transfer from a dithieno thiophene-based polymer to TiO210.1016/S0040-6090(01)01581-4 ↗
31. Influence of interface morphology onto the photovoltaic properties of nanopatterned ZnO/Poly(3-hexylthiophene) hybrid solar cells. an impedance spectroscopy study10.1021/jp203699h ↗
32. Photocurrent enhancement in polythiophene- and alkanethiol-modified ZnO solar cells10.1002/adma.200801082 ↗
33. Electrical and optical-properties of TiO2 anatase thin-films10.1063/1.356306 ↗
34. Optimizing the photocatalytic properties of hydrothermal TiO2 by the control of phase composition and particle morphology. A systematic approach10.1021/ja067050+ ↗
35. Preparation and characterization of sprayed FTO thin films10.1051/epjap:2007090 ↗
36. Refinement of structure of anatase at several temperatures10.1524/zkri.1972.136.3-4.273 ↗
37. Thermal decomposition and spectroscopic investigation of a new aqueous glycolato(-peroxo) Ti(IV) solution–gel precursor10.1016/j.tca.2011.03.028 ↗
38. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
39. Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
40. Fabrication of polymer solar cells using aqueous processing for all layers including the metal back electrode10.1002/aenm.201000007 ↗
41. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗