journal article·2014-06

Fabrication of inkjet printed organic photovoltaics on flexible Ag electrode with additives

Amrita Haldar, Kang-Shyang Liao, Seamus A. Curran

Publisher page

Abstract

Abstract In this paper, we describe organic photovoltaics (OPVs) based on flexible thin film Ag anodes that are fabricated using a controlled deposition of photoactive layer by inkjet printing. The inkjet printed OPV photo-active layer is a P3HT:PCBM blend incorporated with a high boiling point additive, 1,6-hexanedithiol which serves to allow improved morphology. The devices show comparable power conversion efficiency to those fabricated using spin-coating techniques. Optimization of procedures for OPV fabrication without ITO electrodes or spin-coating of the active layer is a vital step towards realizing the potential of OPVs for mass production.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Light-emitting diodes based on conjugated polymers10.1038/347539a0 ↗
2. Photoinduced electron-transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
3. Molecular rectifiers and transistors based on pi-conjugated materials10.1016/S0379-6779(97)04153-2 ↗
4. High efficiency organic solar cells based on single or multiple PIN structures10.1016/j.tsf.2003.11.044 ↗
5. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
6. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
7. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
8. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
9. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
10. Ex-ante environmental and economic evaluation of polymer photovoltaics10.1002/pip.891 ↗
11. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
12. Designs and architectures for the next generation of organic solar cells10.3390/en3061212 ↗
13. Inkjet printing of polymer thin film transistors10.1016/S0040-6090(03)00801-0 ↗
14. Transparent and conductive electrodes based on unpatterned, thin metal films10.1063/1.3028046 ↗
15. Organic photovoltaics using thin gold film as an alternative anode to indium tin oxide10.1016/j.tsf.2011.04.071 ↗
16. Optimization of organic solar cells with thin film Au as anode10.1016/j.solmat.2011.04.019 ↗
17. Flexible Ag electrode for use in organic photovoltaics
18. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
19. Fast inline roll-to-roll printing for indium–tin-oxide-free polymer solar cells using automatic registration10.1002/ente.201200029 ↗
20. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
21. Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes10.1039/c2nr31508d ↗
22. Roll-to-roll inkjet printing and photonic sintering of electrodes for ITO free polymer solar cell modules and facile product integration10.1002/aenm.201200520 ↗
23. Freely available OPV—the fast way to progress10.1002/ente.201300057 ↗
24. Stable organic photovoltaics using Ag thin film anodes10.1039/c2jm15670a ↗
25. Quantifying the relation between the morphology and performance of polymer solar cells using Monte Carlo simulations10.1063/1.2956689 ↗
26. Dynamical Monte Carlo modelling of organic solar cells: the dependence of internal quantum efficiency on morphology10.1021/nl051098o ↗
27. Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
28. Efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
29. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
30. Solvent mixtures for improving device efficiency of polymer photovoltaic devices10.1063/1.2898153 ↗
31. Morphology control in solution-processed bulk-heterojunction solar cell mixtures10.1002/adfm.200900775 ↗
32. Influence of processing additives to nano-morphology and efficiency of bulk-heterojunction solar cells: a comparative review10.1016/j.solener.2010.10.012 ↗
33. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
34. Fast-grown interpenetrating network in poly(3-hexylthiophene):methanofullerenes solar cells processed with additive10.1021/jp810798z ↗
35. Effect of printing parameters and annealing on organic photovoltaics performance10.1557/jmr.2012.217 ↗
36. Method for increasing the photoconductive response in conjugated polymer/fullerene composites10.1063/1.2408661 ↗
37. Solvent additives and their effects on blend morphologies of bulk heterojunctions10.1039/C0JM01976C ↗
38. Material solubility-photovoltaic performance relationship in the design of novel fullerene derivatives for bulk heterojunction solar cells10.1002/adfm.200801189 ↗
39. Evolution of structure, optoelectronic properties, and device performance of polythiophene:fullerene solar cells during thermal annealing10.1002/adfm.201002300 ↗
40. Pattern formation in drying drops10.1103/PhysRevE.61.475 ↗
41. Theory of the liquid–vapor transition of a perfect binary solution10.1021/ed062p112 ↗
42. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
43. Thickness dependence of the efficiency of polymer:fullerene bulk heterojunction solar cells10.1063/1.2211189 ↗
44. Low temperature remote plasma sputtering of indium tin oxide for flexible display applications10.1016/j.tsf.2009.04.072 ↗
45. Effect of carbon nanotube-fullerene hybrid additive on P3HT:PCBM bulk-heterojunction organic photovoltaics10.1016/j.synthmet.2011.11.017 ↗
46. Self-orienting head-to-tail poly(3-alkylthiophenes): new insights on structure-property relationships in conducting polymers10.1021/ja00064a070 ↗
47. Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
48. Role of intermolecular coupling in the photophysics of disordered organic semiconductors: aggregate emission in regioregular polythiophene10.1103/PhysRevLett.98.206406 ↗
49. Thermochromism in poly(3-alkylthiophenes) and their polymer blends10.1016/0379-6779(90)90147-D ↗
50. Optical absorption of poly(3-alkylthiophenes) at low temperatures10.1016/0038-1098(89)90087-2 ↗
51. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗