journal article·2021-04Open access

Graphene as a pre-illumination cooling approach for a concentrator photovoltaic (CPV) system

Mussad Alzahrani, Anurag Roy, Katie Shanks, Senthilarasu Sundaram, Tapas K. Mallick

Abstract

Abstract The concentrator photovoltaic (CPV) system has a high potential in increasing the power output, propelling further the concentration ratio generating excessive heat that significantly deteriorates the solar cell efficiency and reliability. To thoroughly exploit graphene as a pre-illumination cooling technique for a solar cell, we experimentally characterized screen printed graphene coating (GC) physicochemical characterizations to observe the attenuation of light across a wide wavelength range with different GC thicknesses on a low iron-glass. The thermal and electrical characterizations were further executed to observe the performance of GC on a concentrated CPV system. Based on these comprehensive experimental characterizations, the concept of utilizing graphene as a neutral density (ND) filter for focal spot CPV system is shown to reduce the device temperature significantly by 20% and 12% for GC6.3 (6.3 μm thickness) and GC2.2 (2.2 μm thickness) in comparison with the infrared filter, respectively. It has been observed that GC6.3 increased the cell efficiency by about 12% at 8 suns compared to the base case at 400 W/m2 producing 7 suns. It has been ascertained that the introduction of graphene as the ND filter component improved the solar cell efficiency instead of just reducing the geometrical concentration ratio. Further, even the most susceptible single-junction solar cell under a concentration ratio of ≈ 20 suns with no cooling aid has shown an excellent cell efficiency. Therefore, our approach envisages its application for non-CPV and high and ultrahigh CPV system incorporated with a triple-junction solar cell eliminate the use of external heat sinks or other cooling arrangements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · solar cell performance optimization · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Exceeding the shockley–queisser limit within the detailed balance framework
2. 2020
3. Fundamental losses in solar cells10.1002/pip.1024 ↗
4. Simplified calculation of solar cell temperatures in terrestrial photovoltaic arrays10.1115/1.3268087 ↗
5. Prediction of building integrated photovoltaic cell temperatures10.1115/1.1385825 ↗
6. A thermal model for photovoltaic systems10.1016/S0140-6701(02)85831-3 ↗
7. Thermal analysis and test for single concentrator solar cells
8. Concentrated photovoltaic thermal (CPVT) solar collector systems: Part II - implemented systems, performance assessment, and future directions10.1016/j.rser.2014.07.215 ↗
9. Concentrated photovoltaic thermal (CPVT) solar collector systems: Part I - fundamentals, design considerations and current technologies10.1016/j.rser.2015.05.036 ↗
10. Advanced cooling techniques of P.V. modules: a state of art10.1016/j.csite.2020.100674 ↗
11. Cooling of photovoltaic cells under concentrated illumination: a critical review10.1016/j.solmat.2004.09.003 ↗
12. Opportunities and challenges in micro- and nano-technologies for concentrating photovoltaic cooling : a review10.1016/j.rser.2012.11.051 ↗
13. General correlations among geometry, orientation and thermal performance of natural convective micro-finned heat sinks10.1016/j.ijheatmasstransfer.2015.08.015 ↗
14. Technical issues and challenges in the fabrication of a 144-cell 500× concentrating photovoltaic receiver, 2014 IEEE 40th photovoltaic specialist conference
15. Numerical analyses of hybrid jet impingement/microchannel cooling device for thermal management of high concentrator triple-junction solar cell10.1016/j.apenergy.2019.113538 ↗
16. Performance, limits, and thermal stress analysis of high concentrator multijunction solar cell under passive cooling conditions10.1016/j.applthermaleng.2019.114497 ↗
17. Estimation of the performance limits of a concentrator solar cell coupled with a micro heat sink based on a finite element simulation10.1016/j.applthermaleng.2020.115315 ↗
18. Technical feasibility study of passive and active cooling for concentrator PV in harsh environment10.1016/j.applthermaleng.2016.02.023 ↗
19. Review of the solar flux distribution in concentrated solar power: non-uniform features, challenges, and solutions10.1016/j.applthermaleng.2018.12.006 ↗
20. He · 2019
21. Cooling design and evaluation for photovoltaic cells within constrained space in a CPV/CSP hybrid solar system10.1016/j.applthermaleng.2016.08.196 ↗
22. Performance analysis of two 3.5 kWp CPV systems under real operating conditions10.1016/j.apenergy.2015.08.096 ↗
23. Spectral beam splitting for ef fi cient conversion of solar energy — a review10.1016/j.rser.2013.08.026 ↗
24. Modeling for two-stage dish concentrating spectral beam splitting photovoltaic/thermal system
25. A review of the concentrated photovoltaic/thermal (CPVT) hybrid solar systems based on the spectral beam splitting technology10.1016/j.apenergy.2016.11.087 ↗
26. Performance analysis of a novel concentrating photovoltaic combined system10.1016/j.enconman.2012.11.020 ↗
27. Analysis of design parameters for wavelength selective holographic solar concentrators
28. Luminescent solar concentrators - a low cost photovoltaics alternative10.1016/j.renene.2012.01.030 ↗
29. A survey OF selective solar absorbers and their limitations
30. Durability of solar absorber coatings and their cost-effectiveness10.1016/j.solmat.2017.03.010 ↗
31. A review of high-temperature selective absorbing coatings for solar thermal applications10.1016/j.jmat.2019.12.012 ↗
32. Emplacement of screen-printed graphene oxide coating for building thermal comfort discernment10.1038/s41598-020-72670-8 ↗
33. Review on exploration of graphene in diverse applications and its future horizon
34. Remarkable diversity of carbon-carbon bonds: structures and properties of fullerenes, carbon nanotubes, and graphene10.1007/s11224-010-9670-2 ↗
35. Honeycomb carbon: a review of graphene10.1021/cr900070d ↗
36. Graphene-based smart materials10.1038/natrevmats.2017.46 ↗
37. Enhanced heat transfer is dependent on thickness of graphene films: the heat dissipation during boiling10.1038/srep06276 ↗
38. Carbon-based sunlight absorbers in solar-driven steam generation devices10.1002/gch2.201700094 ↗
39. Solar absorber material and system designs for photothermal water vaporization towards clean water and energy production10.1039/C8EE01146J ↗
40. Nanophotonic design principles for ultrahigh efficiency photovoltaics10.1063/1.4794700 ↗
41. Optical design of a 4-off-axis-unit Cassegrain ultra-high concentrator photovoltaics module with a central receiver10.1364/OL.41.001985 ↗
42. Chapter 2 the interest and potential of ultra-high concentration
43. A > 3000 suns high concentrator photovoltaic design based on multiple Fresnel lens primaries focusing to one central solar cell10.1016/j.solener.2018.05.016 ↗
44. Data · 2012 · 3
45. Theoretical analysis and simulation of a tunable mid-infrared filter based on Ge2Sb2Te5 (GST) metasurface10.1016/j.spmi.2019.106169 ↗
46. IR microspectrometers based on linear-variable optical filters10.1016/j.proeng.2011.12.346 ↗
47. A review of high-temperature selective absorbing coatings for solar thermal applications10.1016/j.jmat.2019.12.012 ↗
48. A comprehensive photonic approach for solar cell cooling10.1021/acsphotonics.7b00089 ↗
49. Color tunable low cost transparent heat reflector using copper and titanium oxide for energy saving application10.1038/srep20182 ↗
50. Corporation
51. The impact of using solar colored filters to cover the PV panel in its outcomes10.21276/sb.2016.2.7.5 ↗
52. Performance evaluation of solar PV module with filters in an outdoor environment10.1016/j.csite.2020.100700 ↗
53. Barrutia · 2017
54. On the use of graphene to improve the performance of concentrator III-V multijunction solar cells10.1002/pip.3207 ↗
55. Assessment of the energy yield gain in high CPV systems using graphene-enhanced III-V multijunction solar cells10.1063/1.5124173 ↗
56. Optics for concentrating photovoltaics: trends, limits and opportunities for materials and design10.1016/j.rser.2016.01.089 ↗
57. Performance analysis of a dielectric based 3D building integrated concentrating photovoltaic system10.1016/j.solener.2014.03.002 ↗
58. Effect of using an infrared filter on the performance of a silicon solar cell for an ultra-high concentrator photovoltaic system10.1016/j.matlet.2020.128332 ↗