Crystal growth direction-controlled antimony selenide thin film absorbers produced using an electrochemical approach and intermediate thermal treatment
Source abstract
Abstract
Abstract Sb 2 Se 3 is an emerging material among alternative light absorbers for photovoltaic applications. Unlike typical chalcogenides, Sb 2 Se 3 is particularly appealing due to its single stable crystal phase, layered structure with loose binding of no dangling bonds. Nevertheless, a cost-effective electrochemical approach for the synthesis of Sb 2 Se 3 compounds has not been identified, and the Sb 2 Se 3 film with the most favorable [001] preferred orientation has only just been developed. In this study, Sb-rich precursors were prepared electrochemically at −950 mV (vs. Ag/AgCl), and homogeneous Sb 2 Se 3 thin films were produced using a pre-thermal treatment process prior to the typical selenization process with additional Se coating. This novel procedure notably suppresses potential Sb dissolution into liquid Se due to the formation of polycrystalline Sb-related crystals. As a result, the Sb-rich precursor was successfully transformed into Sb 2 Se 3 thin films with an enhanced perpendicular orientation of the [001] direction. Unfortunately, a high density of voids was produced in the precursor film with two distinguishable layers, and their size increased after selenization. The voids were formed through evolution of H 2 Se gas after the initial electrochemical reaction. The resulting photovoltaic cells demonstrated an energy conversion efficiency of 1.8% in a substrate structure consisting of Mo/Sb 2 Se 3 /CdS/ZnO/ITO.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Solar cell efficiency tables (version 48)10.1002/pip.2788 ↗
2. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%, physica status solidi10.1002/pssr.201409520 ↗
3. Artificially controlled two-step electrodeposition of Cu and Cu/In metal precursors with improved surface roughness for solar applications10.1149/2.0771409jes ↗
4. Improved Cu(In,Ga)(S,Se,S,See)2 thin film solar cells by surface sulfurization10.1016/S0927-0248(97)00054-8 ↗
5. Chemical and structural characterization of Cu(In, Ga)Se2/Mo interface in Cu(In, Ga)Se2 solar cells10.1143/JJAP.35.L1253 ↗
6. High-efficiency CIGS solar cells with modified CIGS surface10.1016/S0927-0248(00)00296-8 ↗
7. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS-Se solar cells10.1039/C5EE02153G ↗
8. Liquid-solid spinodal decomposition mediated synthesis of Sb2Se3 nanowires and their photoelectric behavior10.1039/C5NR03461B ↗
9. Self-standing nanoribbons of antimony selenide and antimony sulfide with well-defined size and band gap10.1088/0957-4484/22/17/175705 ↗
10. The sb-se (antimony-selenium) system10.1007/BF02667889 ↗
11. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
12. Photovoltaics: non-cubic solar cell materials10.1038/nphoton.2015.85 ↗
13. Electrodeposition of antimony selenide thin films and application in semiconductor sensitized solar cells10.1021/am405416a ↗
14. Solution-processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
15. Preparation and characterization of spray deposited photoactive Sb2S3 and Sb2Se3 thin films using aqueous and non-aqueous media10.1016/S0254-0584(01)00350-9 ↗
16. Pulsed laser deposited Sb2Se3 anode for lithium-ion batteries10.1016/j.jallcom.2007.03.109 ↗
17. Electrodeposition of antimony selenide thin films from aqueous acid solutions10.1016/j.jelechem.2012.02.018 ↗
18. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
19. Preparation and characterization of Sb2Se3 thin films by electrodeposition and annealing treatment10.1016/j.apsusc.2012.08.046 ↗
20. The influence of grain boundaries on the nucleation of secondary phases10.1016/0001-6160(55)90014-6 ↗
21. The role of secondary phase precipitation on grain boundary electrical activity in Cu2ZnSnS4 (CZTS) photovoltaic absorber layer material10.1063/1.4769738 ↗
22. Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells10.1016/S0040-6090(00)01846-0 ↗
23. Direct evidence of Cd diffusion into Cu(In, Ga)Se2 thin films during chemical-bath deposition process of CdS films10.1063/1.123875 ↗