journal article·2016-12

Photovoltaic properties of LixCo3−xO4/TiO2 heterojunction solar cells with high open-circuit voltage

Baoyuan Wang, Yixiao Cai, Wenjing Dong, Chen Xia, Wei Zhang, Yanyan Liu, Muhammad Afzal, Hao Wang, Bin Zhu

Publisher page

Abstract

Abstract All-oxide solar cells are presently attracting extensive research interest due to their excellent stability, low-cost and non-toxicity. However, the band gap of metal oxides is lack of effective optimization and results in poor photovoltaic performance, thus hindering their practical applications. In this work, Co 3 O 4 was investigated for application as a photo-absorber in all-oxide solar cells, and its band gap was optimized by introducing Li dopant into the spinel structure. Li x Co 3−x O 4 nanoparticles, prepared via the hydrothermal method, were homogenously coated onto TiO 2 mesoporous films, which were then used to fabricate planar heterojunction TiO 2 /Li x Co 3−x O 4 solar cells (SCs). The effects of Li-doping on the heterojunction solar cell performance were further investigated. The findings revealed that the incorporation of Li ions into Co 3 O 4 led to a significant enhancement in short-circuit current density (J sc ). Remarkably, a high open-circuit voltage (V oc ) of 0.70 V was also achieved. Besides, reasons for the enhanced cell performance are the narrower band gap, reduced photogenerated carrier recombination and the more favorable energy band structure as compared with SCs assembled from pure Co 3 O 4 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Recyclable, flexible, low-power oxide electronics10.1002/adfm.201202907 ↗
2. All‐oxide photovoltaics10.1021/jz3017039 ↗
3. Nanowire-based all-oxide solar cells10.1021/ja8095575 ↗
4. Atomic layer deposited gallium oxide buffer layer enables 1.2V open-circuit voltage in cuprous oxide solar cell10.1002/adma.201401054 ↗
5. Fluorine doped zinc tin oxide multilayer transparent conducting oxides for organic photovoltaic's cells10.1016/j.solmat.2014.11.021 ↗
6. TiO2/Cu2O all-oxide heterojunction solar cells produced by spray pyrolysis10.1016/j.solmat.2014.10.005 ↗
7. Electrodeposition of ZnO window layer for an all-atmospheric fabrication process of chalcogenide solar cell10.1038/srep08961 ↗
8. Effects of the morphology of the electrode nanostructures on the performance of dye-sensitized solar cells10.1007/s12274-008-8051-2 ↗
9. Nanostuctured titania photoanodes for dye solar cells10.1016/j.matpr.2015.04.041 ↗
10. Bilayer hollow/spindle-like anatase TiO2 photoanode for high efficiency dye-sensitized solar cells10.1016/j.jpowsour.2014.12.091 ↗
11. Incompatible length scales in nanostructured Cu2O solar cells10.1002/adfm.201102263 ↗
12. Combinatorial solar cell libraries for the investigation of different metal back contacts for TiO2-Cu2O hetero-junction solar cells10.1039/C4CP00532E ↗
13. p-CuO/n-Si heterojunction solar cells with high open circuit voltage and photocurrent through interfacial engineering10.1002/pip.2483 ↗
14. nanowire-based all-oxide solar cells10.1021/ja8095575 ↗
15. Photoelectrochemical water splitting with mesoporous hematite prepared by a solution-based colloidal approach10.1021/ja101564f ↗
16. Photosensitization of TiO2 nanostructures with CdS quantum dots particulate versus tubular support architectures10.1002/adfm.200801173 ↗
17. Highly efficient quantum-dot-sensitized solar cell based on co-sensitization of CdS/CdSe10.1002/adfm.200800940 ↗
18. Electrodeposited cuprous oxide on indium tin oxide for solar applications10.1016/S0927-0248(01)00112-X ↗
19. In situ loading of Cu2O nanoparticles on a hydroxyl group rich TiO2 precursor as an excellent catalyst for the ullmann reaction10.1007/s12274-010-0043-3 ↗
20. Atomic layer deposited gallium oxide buffer layer enables 1.2V open circuit voltage in cuprous oxide solar cells10.1002/adma.201401054 ↗
21. Heterojunction solar cell with 2% efficiency based on a Cu2O substrate10.1063/1.2194315 ↗
22. High-efficiency Cu2O-based heterojunction solar cells fabricated using a Ga2O3 thin film as n-type layer10.7567/APEX.6.044101 ↗
23. Production of cuprous oxide, a solar cell material, by thermal oxidation and a study of its physical and electrical properties10.1016/S0927-0248(97)00233-X ↗
24. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
25. composition and microstructure of cobalt oxide thin films obtained from a novel cobalt (II) precursor by chemical vapor deposition10.1021/cm001041x ↗
26. Thin film Co3O4/TiO2 heterojunction solar cells10.1002/aenm.201401007 ↗
27. Mn-doped quantum dot sensitized solar cells: a strategy to boost efficiency over 5%10.1021/ja211224s ↗
28. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
29. Fabrication of screen printing pastes from TiO2 powders for dye-sensitized solar cells10.1002/pip.768 ↗
30. Power conversion efficiency enhancement of various size CdS quantum dots and dye cosensitized solar cells10.1016/j.ijhydene.2013.03.062 ↗
31. Characterization of spinel Co3O4 and Li-doped Co3O4 thin film electrocatalysts prepared by the sol–gel route10.1016/S0013-4686(00)00543-0 ↗
32. Lithium insertion into Co3O4: a preliminary investigation10.1016/0167-2738(85)90069-4 ↗
33. Ce 3d XPS study of composite CexMn1−x O2−y wet oxidation catalysts10.1016/S0169-4332(02)00559-7 ↗
34. Catalytic combustion of 1,2-dichlorobenzene at low temperature over Mn-modified Co3O4 catalysts10.1016/j.apcatb.2014.10.047 ↗
35. XPS and EPR study of high and low surface area CoO–MgO solid solutions: surface composition and Co2+ ion dispersion10.1039/FT9969204567 ↗
36. Control of dark current in photoelectrochemical (TiO2/I−–I3−) and dye-sensitized solar cells10.1039/b505718c ↗
37. Origin of the dark-current ideality factor in polymer: fullerene bulk heterojunction solar cells10.1063/1.3651752 ↗
38. Achieving high efficiency silicon-carbon nanotube heterojunction solar cells by acid doping10.1021/nl2002632 ↗
39. Carrier generation and recombination in pn junctions and pn junction characteristics10.1109/JRPROC.1957.278528 ↗
40. Charge transport and recombination in bulk heterojunction solar cells studied by the photoinduced charge extraction in linearly increasing voltage technique10.1063/1.1882753 ↗
41. Effect of microwave on the nanowire morphology, optical, magnetic, and pseudocapacitance behavior of Co3O410.1021/jp209165v ↗
42. Copper-doped cobalt oxide electrodes for oxygen evolution reaction prepared by magnetron sputtering10.1016/j.ijhydene.2011.04.051 ↗
43. p−i−n heterojunctions with BiFeO3 perovskite nanoparticles and p- and n-type oxides: photovoltaic properties10.1021/am506066m ↗