journal article·2015-03

Role of molecular mixing on the stiffness of polymer:fullerene bulk heterojunction films

Adam D. Printz, Suchol Savagatrup, Daniel Rodriquez, Darren J. Lipomi

Publisher page

Abstract

Abstract Bulk heterojunction films, which typically comprise a polymer donor and fullerene acceptor, are considerably stiffer than films of the neat polymer. The increase in stiffness upon blending is dependent on the miscibility of the polymer and the fullerene, and potentially on the details of molecular mixing, in particular, intercalation of the fullerene molecules between the polymer side chains. This paper describes the effects of molecular mixing on the tensile modulus of polythiophenes in 1:1 blends with [6,6]-phenyl C61 butyric acid methyl ester (PC61BM). A series of four polymers and their blends with PC61BM are tested using mechanical, spectroscopic, and photovoltaic device-based measurements to determine if it is possible to predict trends in the tensile modulus based on the extent of molecular mixing. The four polymers are poly-2,2′:5′,2″-(3,3″-dihexyl-terthiophene) (PT2T), which forms an amorphous, molecularly mixed composite, poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT), which forms a well ordered blend with bimolecular crystallization, and regioregular poly(3-hexylthiophene) (P3HT) and poly(3-heptylthiophene) (P3HpT), which form a ternary blend with an amorphous mixed phase. The tensile moduli are measured by the buckling technique and correlations are found between the modulus of the neat polymer and the blends. Although spectroscopic and photovoltaic device-based measurements of P3HT:PC61BM and PT2T:PC61BM, along with literature precedent, suggest completely different extents of molecular mixing, they were found to have similar moduli (2.75±0.59 GPa and 2.61±0.39 GPa, after annealing). A strong correlation between the moduli of the blended films and the moduli of the neat polymers suggest that the stiffness of the blend is determined to a large extent by that of the polymer, and is unexpectedly insensitive to the details of molecular mixing, at least for the materials investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Force Microscopy Techniques and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
3. A low band gap, solution processable oligothiophene with a dialkylated diketopyrrolopyrrole chromophore for use in bulk heterojunction solar cells10.1063/1.3086897 ↗
4. Molecular design and ordering effects in π-functional materials for transistor and solar cell applications10.1021/ja2073643 ↗
5. Bimolecular crystals of fullerenes in conjugated polymers and the implications of molecular mixing for solar cells10.1002/adfm.200801684 ↗
6. Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester system10.1021/cr300005u ↗
7. Stretchable, elastic materials and devices for solar energy conversion10.1039/c1ee01881g ↗
8. Molecular intercalation and cohesion of organic bulk heterojunction photovoltaic devices10.1002/adfm.201202969 ↗
9. Correlating stiffness, ductility, and morphology of polymer:fullerene films for solar cell applications10.1002/aenm.201200595 ↗
10. Polyterthiophenes as donors for polymer solar cells10.1002/adfm.200600859 ↗
11. Increased elasticity of a low-bandgap conjugated copolymer by random segmentation for mechanically robust solar cells10.1039/C4RA00029C ↗
12. Liquid-crystalline semiconducting polymers with high charge-carrier mobility10.1038/nmat1612 ↗
13. Factors governing intercalation of fullerenes and other small molecules between the side chains of semiconducting polymers used in solar cells10.1002/aenm.201200392 ↗
14. A general relationship between disorder, aggregation and charge transport in conjugated polymers10.1038/nmat3722 ↗
15. Recent progress in the morphology of bulk heterojunction photovoltaics10.1039/c1sm06147j ↗
16. Best of both worlds: conjugated polymers exhibiting good photovoltaic behavior and high tensile elasticity10.1021/ma500286d ↗
17. Impact of thermal annealing on the semicrystalline nanomorphology of spin-coated thin films of regioregular poly(3-alkylthiophene)s as observed by high-resolution transmission electron microscopy and grazing incidence X-ray diffraction10.1021/ma300906v ↗
18. Correlation of phase behavior and charge transport in conjugated polymer/fullerene blends10.1021/jp8061493 ↗
19. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
20. Elastic moduli of organic electronic materials by the buckling method10.1021/ma900137k ↗
21. Mechanical properties of conjugated polymers and polymer–fullerene composites as a function of molecular structure10.1002/adfm.201302646 ↗
22. Molecularly stretchable electronics10.1021/cm501021v ↗
23. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
24. Semiconducting polymer–buckminster fullerene heterojunctions: diodes, photodiodes, and photovoltaic cells10.1063/1.108863 ↗
25. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
26. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C(60) bisadduct by device optimization10.1002/adma.201001339 ↗
27. Small molecule solution-processed bulk heterojunction solar cells10.1021/cm102189g ↗
28. Phase separation in bulk heterojunctions of semiconducting polymers and fullerenes for photovoltaics10.1146/annurev-physchem-040513-103712 ↗
29. Failure modes and fast repair procedures in high voltage organic solar cell installations10.1002/aenm.201301625 ↗
30. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
31. P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology10.1021/nl103482n ↗
32. Relation between photoactive layer thickness, 3D morphology, and device performance in P3HT/PCBM bulk-heterojunction solar cells10.1021/ma900817t ↗
33. Interdiffusion of PCBM and P3HT reveals miscibility in a photovoltaically active blend10.1002/aenm.201000023 ↗
34. Mechanical buckling: mechanics, metrology, and stretchable electronics10.1002/adfm.200801065 ↗
35. Correlations between mechanical and electrical properties of polythiophenes10.1021/nn1018768 ↗
36. Stretching and conformal bonding of organic solar cells to hemispherical surfaces10.1039/C3EE42898B ↗
37. Toward mechanically robust and intrinsically stretchable organic solar cells: evolution of photovoltaic properties with tensile strain10.1016/j.solmat.2012.07.013 ↗
38. Three-dimensional concentration mapping of organic blends10.1002/adfm.201202190 ↗
39. Polymer–fullerene miscibility: a metric for screening new materials for high-performance organic solar cells10.1021/ja305875u ↗
40. Molecular packing and solar cell performance in blends of polymers with a bisadduct fullerene10.1021/nl204421p ↗
41. Tuning the properties of polymer bulk heterojunction solar cells by adjusting fullerene size to control intercalation10.1021/nl9023808 ↗
42. The phase behavior of a polymer–fullerene bulk heterojunction system that contains bimolecular crystals10.1002/polb.22214 ↗
43. P3HT/PCBM bulk heterojunction solar cells: relation between morphology and electro-optical characteristics10.1016/j.solmat.2006.02.010 ↗
44. A buckling-based metrology for measuring the elastic moduli of polymeric thin films10.1038/nmat1175 ↗
45. Combinatorial and high-throughput measurements of the modulus of thin polymer films10.1063/1.1906085 ↗
46. Compatible glassy polyblends based upon poly(2,6-dimethyl-1,4-phenylene oxide): tensile modulus sudies10.1002/pen.760190710 ↗
47. Highly conductive and transparent PEDOT:PSS films with a fluorosurfactant for stretchable and flexible transparent electrodes10.1002/adfm.201101775 ↗
48. Eutectic gallium-indium (EGaIn): a moldable liquid metal for electrical characterization of self-assembled monolayers10.1002/anie.200703642 ↗
49. Eutectic gallium–indium (EGaIn): a liquid metal alloy for the formation of stable structures in microchannels at room temperature10.1002/adfm.200701216 ↗
50. On the use of Ga–In eutectic and halogen light source for testing P3HT-PCBM organic solar cells10.1016/j.solmat.2005.11.003 ↗
51. Self-healing stretchable wires for reconfigurable circuit wiring and 3D microfluidics10.1002/adma.201203921 ↗
52. Poly(3-hexylthiophene) and [6,6]-phenyl-C61-butyric acid methyl ester mixing in organic solar cells10.1021/ma3008527 ↗
53. S. Savagatrup, D. Rodriquez, A.D. Printz, A.B. Sieval, J.C. Hummelen, D.J. Lipomi, Effect of fullerene size and mixed grades of [60]PCBM and [70]PCBM on the mechanical properties of bulk heterojunction films (2014) (submitted for publication).
54. Use of X-ray diffraction, molecular simulations, and spectroscopy to determine the molecular packing in a polymer–fullerene bimolecular crystal10.1002/adma.201202293 ↗
55. Microwave-assisted synthesis of polythiophenes via the Stille coupling10.1016/j.synthmet.2004.09.015 ↗