journal article·2011-08

Effect of thiophene donor units on the optical and photovoltaic behavior of fluorene-based copolymers

Phimwipha Piyakulawat, Anusit Keawprajak, Kanpitcha Jiramitmongkon, Matthias Hanusch, Joerg Wlosnewski, Udom Asawapirom

Publisher page

Abstract

Abstract A series of novel conjugated polymers containing alternating electron-donating and electron-accepting units based on 9,9-dioctylfluorene, 4,7-dithienyl-2-yl-2,1,3-benzothiadiazole, and (oligo)thiophene were synthesized. The polymers were synthesized by the Suzuki cross-coupling polymerization of 9,9-dioctylfluorene-2,7-diboronic acid and 4,7-di(2-bromothien-5-yl)-2,1,3-benzothiadiazole with dibromo(oligo)thiophene (thiophene, bithiophene, and terthiophene). Optical properties of the copolymers were highly dependent on the length of the (oligo)thiophene unit. With the incorporation of three thiophene units in the polymer backbone, the copolymer absorption covers a broad range of the visible spectrum from 300 to 700 nm. The band gap energies derived from the absorption edge of the thin film spectra were in the range of 1.83–1.94 eV. The photovoltaic performance increases as the length of the (oligo)thiophene segments in the polymer backbone increases. The best performance of photovoltaic device was obtained by PFTBzTTT as the electron donor material with PCE of 1.25% under an AM 1.5 solar simulator.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Plastic solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
2. Polymer-based solar cells10.1016/S1369-7021(07)70276-6 ↗
3. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die and screen printing10.1016/j.solmat.2008.12.012 ↗
4. A complete process for production of flexible large area polymer solar cells entirely using screen printing-first public demonstration10.1016/j.solmat.2008.12.001 ↗
5. High-performance polymer solar cells of an alternating polyfluorene copolymer and a fullerene derivative10.1002/adma.200304150 ↗
6. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
7. Synthesis and preliminary characterization of novel naphthalene bisimide based copolymers10.1016/j.synthmet.2008.11.003 ↗
8. Synthesis and characterization of bridged bithiophene-based conjugated polymers for photovoltaic applications: acceptor strength and ternary blends10.1021/ma902206u ↗
9. Low band gap conjugated polymers based on thiophene, benzothiadiazole, and benzobis(thiadiazole)10.1021/ma052683e ↗
10. Low optical bandgap polythiophenes by an alternating donor/acceptor repeat unit strategy10.1021/ja9640399 ↗
11. Synthesis of an alternating thienylenevinylene–benzothiadiazole copolymer with high hole mobility for use in organic solar cells10.1016/j.orgel.2010.08.004 ↗
12. Indolo[3,2-b]carbazole-based alternating donor–acceptor copolymers: synthesis, properties and photovoltaic application10.1039/b912258c ↗
13. Effect of oxadiazole side chains based on alternating fluorene–thiophene copolymers for photovoltaic cells10.1016/j.eurpolymj.2009.03.018 ↗
14. Synthesis and properties of alternating polyfluorene copolymers with redshifted absorption for use in solar cells10.1016/S0379-6779(02)00552-0 ↗
15. Dialkylcyclopentadithiophene polymers and copolymers10.1002/1521-3927(20010701)22:10<746::AID-MARC746>3.0.CO;2-H ↗
16. Electrochemical determination of the ionization potential and electron affinity of poly(9,9-dioctylfluorene)10.1063/1.122479 ↗
17. Synthesis and characterization of new fluorene-acceptor alternating and random copolymers for light-emitting applications10.1016/j.polymer.2005.11.058 ↗
18. Effects of acceptors on the electronic and optoelectronic properties of fluorene-based donor–acceptor–donor copolymers10.1002/macp.200700158 ↗
19. Improvements of fill factor in solar cells based on blends of polyfluorene copolymers as electron donors10.1016/j.tsf.2006.08.043 ↗
20. Fluorene-based low band gap copolymers for high performance photovoltaic devices10.1063/1.1667614 ↗
21. Electrochemical and optical studies of the band gaps of alternating polyfluorene copolymers10.1016/j.synthmet.2006.02.013 ↗
22. Novel red-emitting fluorene-based copolymers10.1039/b203862e ↗
23. A benzothiadiazole-based oligothiophene for vacuum-deposited organic photovoltaic cells10.1016/j.solmat.2010.06.016 ↗
24. Synthesis and characterization of alternating fluorene-based copolymers containing diaryl- and non-substituted bithiophene units10.1016/j.polymer.2005.07.075 ↗
25. Bridging effect on structural and optoelectronic properties of oligothiophene10.1016/j.theochem.2007.11.023 ↗
26. Dialkylfluorene-oligothiophene and dialkylfluorene-dithienylvinylene alternating copolymers10.1055/s-2002-32523 ↗
27. Theoretical investigation on the ground- and excited-state properties of novel octupolar oligothiophene-functionalized truxenes and dipolar analogs10.1016/j.polymer.2004.08.070 ↗
28. New didecyloxyphenylene-acceptor alternating conjugated copolymers: synthesis, properties, and optoelectronic device applications10.1021/ma800488g ↗