journal article·2018-11Open access

Sulfurization of co-evaporated Cu2ZnSnSe4 thin film solar cells: The role of Na

L. de la Cueva, Y. Sánchez, L. Calvo-Barrio, F. Oliva, V. Izquierdo-Roca, S. Khelifi, T. Bertram, J.M. Merino, M. León, R. Caballero

Abstract

The sulfurization of co-evaporated Cu2ZnSnSe4 (CZTSe) thin films is studied. In this work, a relationship between the Na concentration and the further S incorporation in the CZTSe absorber layer is found. Na is added by a NaF precursor layer before CZTSe co-evaporation and/or by diffusion from the soda-lime glass substrate. Higher Na concentrations result in bigger grain sizes, higher S/(S + Se) atomic ratios and photovoltaic devices with higher VOC, as investigated by SEM, GIXRD, Raman and I-V measurements. Results using an alternative substrate as ceramic verify the importance of the control of the Na content, which alters the carrier concentrations and elements distribution with much higher S and Na concentrations at the surface in this particular case. By using this methodology, it is possible to tune the kesterite band gap energy by the creation of S-gradient through the absorber thin film. This may provide a new approach for the control of Cu2ZnSn(S,Se)4 growth and development of high efficiency kesterite solar cells. Efficiencies of 5.5% and 6.4% are obtained using ceramic and SLG substrates respectively (without antireflection coatings and without grids).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. K.K. Solar Frontier, Solar Frontier achieves world record thin-film solar cell efficiency: 22.9%, press release. 〈http://www.solar-frontier.com/eng/news/2017/1220_press.html〉, (Accessed 20 December 2017).
3. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
4. Impact of Sn(S,Se) secondary phases in Cu2ZnSn(S,Se)4 solar cells: a chemical route for their selective removal and absorber surface passivation10.1021/am502609c ↗
5. Semi-empirical device model for Cu2ZnSn(S,Se)4 solar cells10.1063/1.4890844 ↗
6. Cu-Zn disorder and bandgap fluctuations in Cu2ZnSn(S,Se)4: theoretical and experimental investigations10.1002/pssb.201552530 ↗
7. Fabrication of pentanary Cu(In,Ga)(Se,S)2 absorbers by selenization and sulfurization10.1016/j.solmat.2009.02.004 ↗
8. K.K. Solar Frontier, Solar Frontier achieves world record thin-film solar cell efficiency: 22.3%, press release. 〈www.solar-frontier.com/eng/news/2015/C051171.html〉, (Accessed 8 December 2015).
9. Enhanced efficiency of Cd-free Cu(In,Ga)(Se,S)2 minimodule via (Zn,Mg)O second buffer layer and alkali metal post-treatment10.1109/JPHOTOV.2017.2745710 ↗
10. Impacts of surface sulfurization on CuIn1−xGaxSe2 thin-film solar cells10.1002/pip.2554 ↗
11. Modeling of the surface sulfurization of CIGSe-based solar cells10.1016/j.solener.2014.08.004 ↗
12. Efficiency enhancement for Cu2ZnSn(S,Se)4 solar cells by S-modified surface layer10.1016/j.solmat.2016.12.033 ↗
13. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
14. Influence of Na on Cu(In,Ga)Se2 solar cells grown on polyimide substrates at low temperature: impact on the Cu(In,Ga)Se2/Mo interface10.1063/1.3340459 ↗
15. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
16. Grain size and texture of Cu2ZnSnS4 thin films synthesized by cosputtering binary sulfides and annealing: effects of processing conditions and sodium10.1007/s11664-011-1729-3 ↗
17. Effects of sodium incorporation in co-evaporated Cu2ZnSnSe4 thin-film solar cells10.1063/1.4802972 ↗
18. Impact of Na dynamics at the Cu2ZnSn(S,Se)4/CdS interface during post low temperature treatment of absorbers10.1021/acsami.5b12243 ↗
19. Source and effects of sodium in solution-processed kesterite solar cells10.1002/pssa.201532619 ↗
20. Sodium assisted sintering of chalcogenides and its application to solution processed Cu2ZnSn(S,Se)4 thin film solar cells10.1021/cm403504u ↗
21. Complex interplay between absorber composition and alkali doping in high-efficiency kesterite solar cells
22. Towards the growth of Cu2ZnSn1−xGexS4 thin films by a single-stage process: effect of substrate temperature and composition10.1016/j.solmat.2015.03.004 ↗
23. Vitreous enamel as sodium source for efficient kesterite solar cells on commercial ceramic tiles10.1016/j.solmat.2016.04.035 ↗
24. Dimitrievska · Appl. Phys. Lett. · 2014 · 104 · 02190110.1063/1.4861593 ↗
25. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1−x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
26. Optical methodology for process monitoring of chalcopyrite photovoltaic technologies: application to low cost Cu(In,Ga)(S,Se)2 electrodeposition based processes10.1016/j.solmat.2015.12.036 ↗
27. Influence of sodium incorporation on kesterite Cu2ZnSnS4 solar cells fabricated on stainless steel substrates10.1016/j.solmat.2016.07.036 ↗
28. Effects of sodium on polycrystalline Cu(In,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
29. Impact of the Ga concentration on the microstructure of CuIn1−xGaxSe210.1002/pssr.200802059 ↗
30. Ge-incorporated Cu2ZnSnSe4 thin-film solar cells with efficiency greater than 10%10.1016/j.solmat.2015.09.039 ↗
31. Improvement of voltage deficit of Ge-incorporated kesterite solar cell with 12.3% conversion efficiency10.7567/APEX.9.102301 ↗
32. Scheer · 2011
33. Effects of the compositional ratio distribution with sulfurization temperatures in the absorber layer on the defect and surface electrical characteristics of Cu2ZnSnS4 solar cells10.1002/pip.2619 ↗
34. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗