Atmospheric spatial atomic layer deposition of Zn(O,S) buffer layer for Cu(In,Ga)Se2 solar cells
Source abstract
Abstract
Zinc oxysulfide has been grown by spatial atomic layer deposition (S-ALD) and successfully applied as buffer layer in Cu(In, Ga)Se2 (CIGS) solar cells. S-ALD combines high deposition rates (up to nm/s) with the advantages of conventional ALD, i.e. excellent control of film composition and superior uniformity over large-area and even non-flat substrates. Diethylzinc, water and hydrogen sulfite (H2S) have been used as zinc, oxygen and sulfur precursor, respectively. The S/(S+O) ratio in the film is accurately controlled by exposing the substrate simultaneously to both H2O and H2S precursors, which are pre-mixed and co-injected in the same deposition zone. The optoelectronic and morphological properties of Zn(O,S) are characterized as a function of the S/(S+O) ratio. Zn(O,S) buffer layers with different values of S/(S+O) ratio are applied in CIGS solar cells. An optimum value of S/(S+O) ratio of about 0.4 is found for which both the short circuit current density (Jsc=34.2 mA/cm2) and cell efficiency (η=15.9%) increase, as compared to reference cells with CdS buffer layer (Jsc=32.1 mA/cm2, η=15.5%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
2. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
3. Cadmium-free buffer layers deposited by atomic later epitaxy for copper indium diselenide solar cells10.1016/S0040-6090(99)00860-3 ↗
4. Above 16% efficient sequentially grown Cu(In,Ga)(Se,S)2 -based solar cells with atomic layer deposited Zn(O,S) buffers10.1002/pip.2579 ↗
5. Junction formation by Zn(O,S) sputtering yields CIGSe-based cells with efficiencies exceeding 18%10.1002/pip.2445 ↗
6. Cu(In,Ga)Se2 thin film solar cells with a combined ALD-Zn(O,S) buffer and MOCVD-ZnO:B window layers10.1016/j.solmat.2013.05.052 ↗
7. A comparative study of Cd- and Zn-compound buffer layers on Cu(In1−x,Gax)(Sy;Se1−y)2 thin film solar cells10.1002/pip.2695 ↗
8. Characterization of electronic structure of oxysulfide buffers and band alignment at buffer/absorber interfaces in Cu(In,Ga)Se2 -based solar cells10.7567/JJAP.53.05FW09 ↗
9. Atomic layer deposition: an overview10.1021/cr900056b ↗
10. Spatial atomic layer deposition: a route towards further industrialization of atomic layer deposition10.1116/1.3670745 ↗
11. In situ analysis of dopant incorporation, activation, and film growth during thin film ZnO and ZnO:Al atomic layer deposition10.1021/jp908332q ↗
12. Growth characteristics, material properties, and optical properties of zinc oxysulfide films deposited by atomic layer deposition10.1116/1.3664758 ↗
13. Atmospheric spatial atomic layer deposition of in-doped ZnO10.1149/2.002405jss ↗
14. Spatial atmospheric atomic layer deposition of Al(x)Zn(1−x)O10.1021/am404137e ↗
15. Spatial atmospheric atomic layer deposition of InxGayZnzO for thin film transistors10.1021/am508071y ↗
16. Spatial atomic layer deposition of zinc oxide thin films10.1021/am2013097 ↗
17. Zn(O,S) buffer layers by atomic layer deposition in Cu(In,Ga)Se[sub 2] based thin film solar cells: band alignment and sulfur gradient10.1063/1.2222067 ↗
18. High rate (7nm/s), atmospheric pressure deposition of ZnO front electrode for Cu(In,Ga)Se2 thin-film solar cells with efficiency beyond 15%10.1002/pip.2423 ↗
19. Strong valence-band offset bowing of ZnO1−xSx enhances p-type nitrogen doping of ZnO-like alloys10.1103/PhysRevLett.97.146403 ↗
20. Structural properties and bandgap bowing of ZnO1−xSx thin films deposited by reactive sputtering10.1063/1.1825053 ↗
21. Band alignment at sputtered ZnSxO1−x/Cu(In,Ga)(Se,S)2 heterojunctions10.1002/pssr.201206195 ↗
22. Wide-gap Cu(In,Ga)Se2 solar cells with Zn(O,S) buffer layers prepared by atomic layer deposition10.7567/JJAP.51.10NC15 ↗
23. Determination of dominant recombination paths in Cu(In,Ga)Se2 thin-film solar cells with ALD–ZnO buffer layers10.1016/j.tsf.2004.11.008 ↗