Breaking mechanism of indium tin oxide and its effect on organic photovoltaic cells
Source abstract
Abstract
Abstract Indium Tin Oxide (ITO) is one of the most used anode materials in organic solar cells. ITO is a brittle material, however, in roll-to-roll manufacturing plants and final applications material flexibility is beneficial. This study examines the flexibility limits of ITO in applications manufacturing photovoltaic cells. First, ITO was bent using different cylinders to achieve different sample bending curvatures and thus different stages of breaking. Next, the conductivity of ITO was measured and surface topology was profiled. As a result, it was discovered that samples start to break even with low bending curvatures, and while no changes are detected in the surface profile, conductivity starts to decrease. When the cracks start to appear on the surface of ITO, a specific radius of curvature is discernible. In this critical bending curvature resistance and its relative standard deviation start to increase faster. Optical profilometer examination revealed that the cracks reach the ITO surface at the same moment. After this critical bending curvature, clear positive correlation was observed between the conductivity and the number of cracks. To test the effect of cracked ITO on the performance of solar cells, solar cells were produced on top of the cracked ITO layer. The measurements showed that cracks did not decrease the performance of solar cell. This fact supports the use of ITO-based organic photovoltaic cells in applications where flexibility is required as well as in roll-to-roll manufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Criteria for choosing transparent conductors10.1557/mrs2000.151 ↗
2. Thin-film solar cells: an overview10.1002/pip.541 ↗
3. The influence of the electrode choice on the performance of organic solar cells
4. Present status of the development and application of transparent conductors oxide thin solid films10.4236/msa.2011.29167 ↗
5. Discovery-based design of transparent conducting oxide films10.1016/j.tsf.2007.03.014 ↗
6. Visual and energy performance of switchable windows with antireflection coatings10.1016/j.solener.2010.04.016 ↗
7. Synthesis and photovoltaic properties of a donor-acceptor double-cable polythiophene with high content of C60 pendant10.1021/ma070052+ ↗
8. Patterning of indium tin oxide by projection photoablation and lift-off process for fabrication of flat-panel displays
9. Solution-processed flexible polymer solar cells with silver nanowire electrodes10.1021/am2009585 ↗
10. Environmental and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
11. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
12. Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment10.1039/c1ee01766g ↗
13. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
14. Espinosa · Life-cycle analysis of product integrated polymer solar cells · 2011 · 4 · 1547
15. Bending fatigue study of sputtered ITO on flexible substrate10.1109/JDT.2011.2151830 ↗
16. The effect of film microstructures on cracking of transparent conductive oxide (TCO) coatings on polymer substrates10.1016/j.surfcoat.2010.08.055 ↗
17. Electromechanical properties of transparent conducting substrates for flexible displays10.1109/JPROC.2005.851515 ↗
18. Enhanced electrical stability of flexible indium tin oxide films prepared on stripe SiO2 buffer layer-coated polymer substrates by magnetron sputtering10.1016/j.apsusc.2010.12.064 ↗
19. Durable transparent carbon nanotube films for flexible device components10.1016/j.tsf.2010.07.026 ↗
20. Characteristics of ITO films deposited on a PET Substrate under various deposition conditions10.3365/met.mat.2008.12.745 ↗
21. Durability study on sputtered indium tin oxide thin film on poly ethylene terephthalate substrate10.1016/j.tsf.2011.04.069 ↗
22. Influence of the Blend concentration of P3HT:PCBM in the performances of BHJ solar cells
23. Aernouts · 2006 · 174
24. Efficiency enhancement in organic photovoltaic cells: consequences of optimizing series resistance10.1002/adfm.200901107 ↗