journal article·2020-05Open access

Durability of ionomer encapsulants in photovoltaic modules

Jared Tracy, Nick Bosco, Chris Delgado, Reinhold Dauskardt

Abstract

Abstract Ethylene vinyl acetate (EVA) has for decades been the material of choice for photovoltaic (PV) module encapsulation. However, while it is relatively inexpensive and initially adheres well to module components, EVA discolors with age and—as interfacial adhesion degrades—becomes susceptible to delamination, ultimately resulting in reduced module efficiency and shortened service lifetimes. As potential replacements for EVA, ionomer thermoplastic materials cure faster, are more resistant to discoloration and potential induced degradation, and do not evolve corrosive acetic acid, making them compatible with new device materials such as perovskites. Since there is limited information on ionomer durability for PV module applications, a series of field and accelerated laboratory aging studies were conducted to assess ionomer interface stability in the presence of terrestrial environmental stressors. It is shown that adhesion to the glass and cell interfaces of PV modules is inferior to EVA, both before and after aging, rendering ionomers particularly susceptible to delamination after short timeframes. Potential solutions to improve ionomer adhesion are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Surface Roughness and Optical Measurements · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. The block approach to photovoltaic module development
2. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
3. Encapsulation and backsheet adhesion metrology for photovoltaic modules10.1002/pip.2817 ↗
4. Development and first results of the width-tapered beam method for adhesion testing of photovoltaic material systems
5. Encapsulant adhesion to surface metallization on photovoltaic cells10.1109/JPHOTOV.2017.2746572 ↗
6. Commonly observed degradation in field-aged photovoltaic modules
7. Study of 20-year old PV plant (MTFB project)
8. Analysis of degradation mechanisms of crystalline silicon PV modules after 12 years of operation in Southern Europe10.1002/pip.1083 ↗
9. The results of performance measurements of field-aged crystalline silicon photovoltaic modules10.1002/pip.874 ↗
10. Long term reliability of modules
11. Weathering degradation of EVA encapsulant and the effect of its yellowing on solar cell efficiency
12. Investigation into the causes of browning in EVA encapsulated flat plate PV modules
13. Ethylene-vinyl acetate (EVA) encapsulants for photovoltaic modules: degradation and discoloration mechanisms and formulation modifications for improved photostability
14. Reliability of PV modules and balance-of-system components
15. Control of moisture ingress into photovoltaic modules
16. Evaluation of moisture ingress from the perimeter of photovoltaic modules Michael10.1002/pip.2374 ↗
17. Acetic acid production and glass transition concerns with ethylene-vinyl acetate used in photovoltaic devices10.1016/j.solmat.2006.10.009 ↗
18. Multi angle laser light scattering evaluation of field exposed thermoplastic photovoltaic encapsulant materials10.1002/ese3.106 ↗
19. Overview of PV module encapsulation materials
20. Accelerated stress testing of hydrocarbon-based encapsulants for medium concentration CPV applications
21. Performance improvements in PV modules using ionomer encapsulants
22. Prevention of potential-induced degradation with thin ionomer film10.1109/JPHOTOV.2014.2365465 ↗
23. Performance and life prediction model for photovoltaic modules: effect of encapsulant constitutive behavior10.1016/j.solmat.2013.11.016 ↗
24. Banse · 2017
25. Effect of ionomer thickness on mode I interlaminar fracture toughness for ionomer toughened CFRP10.1016/S1359-835X(99)00023-8 ↗
26. 2013
27. Determining the degree of crosslinking of ethylene vinyl acetate photovoltaic module encapsulants—a comparative study10.1016/j.solmat.2013.04.022 ↗
28. Defining threshold values of encapsulant and backsheet adhesion for PV module reliability10.1109/JPHOTOV.2017.2746682 ↗