Two-dimensional heterojunction SnS2/SnO2 photoanode with excellent photoresponse up to near infrared region
Source abstract
Abstract
Two-dimensional (2D) semiconductor materials have attracted much attention in solar energy utilization due to their unique structure and excellent photoelectrical properties. However, the band bending in the 2D materials-based photoelectrodes is limited when the thickness of 2D flakes are too thin, which normally leads to weak driving force for charge separation and transfer. Constructing heterojunction is an effective way to enhance the band bending by creating additional space charge layer in semiconductors. Herein we intentionally introduce a 2D SnS layer on SnO nanoflakes to design a new class of 2D heterojunction of SnS/SnO. The low lattice mismatch of two materials leads to intimate heterojunction contact with well-matched energy band alignment, which efficiently promote the charge carrier separation of SnS photoelectrodes. Moreover, the conductive SnO provides a good pathway for electron collection. Consequently, the photocurrent density of the SnS/SnO heterojunction photoanode is largely improved by 2.8 times to 0.7 mA cm at 1.23 V vs RHE compared to the pristine SnS, which also shows significantly improved photocurrent density than others for wet-chemically prepared SnS based photoanodes. Considerable near infrared (NIR) light photoresponse is also observed in the SnS/SnO heterojunction which is mainly induced by the defects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · 2D Materials and Applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Photoelectrochemical cells10.1038/35104607 ↗
2. Solar water splitting cells10.1021/cr1002326 ↗
3. Nano-architecture and material designs for water splitting photoelectrodes10.1039/c2cs35019j ↗
4. Photoelectrochemical devices for solar water splitting—materials and challenges10.1039/C6CS00306K ↗
5. Recent advances in semiconductors for photocatalytic and photoelectrochemical water splitting10.1039/C3CS60378D ↗
6. Rational design of electrocatalysts for simultaneously promoting bulk charge separation and surface charge transfer in solar water splitting photoelectrodes10.1039/C7TA10361A ↗
7. Hybrid photoelectrochemical water splitting systems: from interface design to system assembly
8. 2D porous TiO2 single-crystalline nanostructure demonstrating high photo-electrochemical water splitting performance10.1002/adma.201705666 ↗
9. Two-dimensional materials in semiconductor photoelectrocatalytic systems for water splitting10.1039/C8EE00886H ↗
10. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides10.1038/nnano.2012.193 ↗
11. From two-dimensional materials to their heterostructures: an electrochemist's perspective10.1016/j.apmt.2017.05.003 ↗
12. Recent advances in ultrathin two-dimensional nanomaterials10.1021/acs.chemrev.6b00558 ↗
13. Role of interfaces in two-dimensional photocatalyst for water splitting10.1021/acscatal.7b03437 ↗
14. Review of two-dimensional materials for photocatalytic water splitting from a theoretical perspective10.1039/C6CY02178F ↗
15. Hematite heterostructures for photoelectrochemical water splitting: rational materials design and charge carrier dynamics10.1039/C6EE01845A ↗
16. A heterojunction strategy to improve the visible light sensitive water splitting performance of photocatalytic materials10.1039/C8TA04165B ↗
17. Lattice-matched heterojunctions between topological and normal insulators—a first-principles study
18. Lattice-matched heterojunctions between blue phosphorene and MXene Y2CX2 (X = F, O, and Y = Zr, Hf)10.1016/j.commatsci.2018.05.040 ↗
19. SnSx (x = 1, 2) Nanocrystals as effective catalysts for photoelectrochemical water splitting10.3390/catal7090252 ↗
20. Switched photocurrent on tin sulfide-based nanoplate photoelectrodes10.1002/cssc.201601603 ↗
21. Vertically aligned two-dimensional SnS2 nanosheets with a strong photon capturing capability for efficient photoelectrochemical water splitting10.1039/C6TA08327G ↗
22. Phase-modulated band alignment in CdS nanorod/SnSx nanosheet hierarchical heterojunctions toward efficient water splitting10.1002/adfm.201706785 ↗
23. Different morphologies of SnS2 supported on 2D g-C3N4 for excellent and stable visible light photocatalytic hydrogen generation10.1021/acssuschemeng.7b04792 ↗
24. Monodisperse SnS2 nanosheets for high-performance photocatalytic hydrogen generation10.1021/am506396z ↗
25. Carbon dots decorated vertical SnS2 nanosheets for efficient photocatalytic oxygen10.1063/1.4960527 ↗
26. A heterojunction strategy to improve the visible light sensitive water splitting performance of photocatalytic materials10.1039/C8TA04165B ↗
27. Electronic and optical properties of single crystal SnS2: an earth-abundant disulfide photocatalyst10.1039/C5TA08214E ↗
28. High-performance visible-light-driven SnS2/SnO2 nanocomposite photocatalyst prepared via in situ hydrothermal oxidation of SnS2 nanoparticles10.1021/am200102y ↗
29. Visible-light photocatalytic reduction of carbon dioxide over SnS210.1016/j.matlet.2016.03.122 ↗
30. Ab. initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
31. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
32. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
33. Semiempirical GGA-type density functional constructed with a long-range dispersion correction10.1002/jcc.20495 ↗
34. Boosting the solar water oxidation performance of a BiVO4 photoanode by crystallographic orientation control10.1039/C8EE00125A ↗
35. Predicting two-dimensional C3B/C3N van der waals p-n heterojunction with strong interlayer electron coupling and enhanced photocurrent10.1021/acs.jpclett.7b03449 ↗
36. Interface engineering of the photoelectrochemical performance of Ni-oxide-coated n-Si photoanodes by atomic-layer deposition of ultrathin films of cobalt oxide10.1039/C5EE01687H ↗
37. Photoelectrode for water splitting: materials, fabrication and characterization10.1007/s40843-018-9240-y ↗
38. Enhanced surface reaction kinetics and charge separation of p-n heterojunction Co3O4/BiVO4 photoanodes10.1021/jacs.5b04186 ↗
39. Unique 3D heterojunction photoanode design to harness charge transfer for efficient and stable photoelectrochemical water splitting10.1039/C4EE03707C ↗
40. Equivalent circuit of electrons and holes in thin semiconductor films for photoelectrochemical water splitting applications10.1021/jz3010909 ↗
41. Electrochemical and photoelectrochemical investigation of water oxidation with hematite electrodes10.1039/c2ee21414h ↗
42. New insights into Se/BiVO4 heterostructure for photoelectrochemical water splitting: a combined experimental and DFT study10.1021/acs.jpcc.7b01149 ↗
43. Defect engineering of two-dimensional transition metal dichalcogenides10.1088/2053-1583/3/2/022002 ↗
44. Optical identification of sulfur vacancies bound excitons at the edges of monolayer tungsten disulfide10.1126/sciadv.1602813 ↗
45. Vacancy-induced ferromagnetism of MoS2 nanosheets10.1021/ja5120908 ↗