Pure- or mixed-solvent assisted treatment for crystallization dynamics of planar lead halide perovskite solar cells
Source abstract
Abstract
Abstract Pure chlorobenzene (CBZ) and 2-propanol (IPA) or mixed-solvent assisted spin-coating have been applied to one-step fabricate CH3NH3PbI3 and CH3NH3PbI3−xClx perovskite films, respectively. However, with the treatment of pure- or mixed solvent, there are obvious differences in the formation of CH3NH3PbI3 and CH3NH3PbI3−xClx perovskite films with full coverage and large crystal grain size, as well as the role in the photovoltaic performance. Furthermore, the nucleation and growth dynamics of perovskite crystals have been taken into consideration with the activation energy of transporting crystallizing segments across the crystal interface and the formation free energy of a critical-sized nucleus. Planar heterojunction (PHJ) perovskite solar cells (PSCs) based on CH3NH3PbI3 by mixed-solvent treatment exhibit a poor power conversion efficiency (PCE) owing to the formation little amount of perovskite crystals with low crystallinity. While pure CBZ treatment renders the corresponding device get efficiency of 8.1%, which is due to the formation of uniform CH3NH3PbI3 thin film with higher surface coverage and crystallinity. Inversely, PSCs based on CH3NH3PbI3−xClx with mixed-solvent shows the highest PCE of 9.2%, short-circuit current density (Jsc) of 16.06 mA/cm2 and fill factor (FF) of 63.6% with high device reproducibility and low photocurrent hysteresis, because of possessing higher light absorption ascribed from bigger crystal size and better surface morphology with no pin-holes. These results will provide significant guidance for CH3NH3PbI3 and CH3NH3PbI3−xClx perovskite device performance optimization and large-scale application by pure- and mixed-solvent treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Light-Emitting Diodes Research · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. The emergence of a new era for low-cost, high-efficiency solar cells10.1021/jz4020162 ↗
3. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
4. Organolead halide perovskite: new horizons in solar cell research10.1021/jp409025w ↗
5. Solar cells. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
6. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
7. Morphology control of the perovskite films for efficient solar cells10.1039/C4DT03869J ↗
8. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
9. Effect of annealing temperature on film morphology of organic–inorganic hybrid pervoskite solid-state solar cells10.1002/adfm.201304022 ↗
10. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
11. Excitons versus free charges in organo-lead tri-halide perovskites10.1038/ncomms4586 ↗
12. Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
13. Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer10.1021/ja512518r ↗
14. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells10.1021/ja307789s ↗
15. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
16. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
17. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
18. The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells10.1039/C3EE43161D ↗
19. Optical properties and limiting photocurrent of thin-film perovskite solar cells10.1039/C4EE03224A ↗
20. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
21. Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers10.1039/C4EE01138D ↗
22. Band-gap tuning of lead halide perovskites using a sequential deposition process10.1039/C4TA00435C ↗
23. Organometal halide perovskites as useful materials in sensitized solar cells10.1039/c3dt53503g ↗
24. Morphology-photovoltaic property correlation in perovskite solar cells: one-step versus two-step deposition of CH3NH3PbI310.1063/1.4891275 ↗
25. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
26. An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive10.1039/C4NR02425G ↗
27. Planar heterojunction perovskite solar cells with superior reproducibility10.1038/srep06953 ↗
28. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/anie.201405334 ↗
29. Rate of nucleation in condensed systems10.1063/1.1747055 ↗
30. Temperature dependence of spherulitic growth rate of isotactic polystyrene. A critical comparison with the kinetic theory of surface nucleation10.1295/polymj.1.82 ↗
31. Some considerations concerning the temperature dependence of the bulk crystallization rate constants of polymeric materials10.1002/(SICI)1099-0488(19970130)35:2<359::AID-POLB12>3.0.CO;2-H ↗
32. Effect of annealing temperature on film morphology of organic-inorganic hybrid pervoskite solid-state solar cells10.1002/adfm.201304022 ↗
33. Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications10.1039/c3ta10518k ↗
34. Perovskite-based hybrid solar cells exceeding 10% efficiency with high reproducibility using a thin film sandwich approach10.1002/adma.201304803 ↗
35. 6.5% efficient perovskite quantum-dot-sensitized solar cell10.1039/c1nr10867k ↗
36. Highly efficient fullerene/perovskite planar heterojunction solar cells via cathode modification with an amino-functionalized polymer interlayer10.1039/C4TA05352D ↗
37. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗