journal article·2009-06Open access

Industrially feasible multi-crystalline metal wrap through (MWT) silicon solar cells exceeding 16% efficiency

Florian Clement, Michael Menkoe, Tim Kubera, Christian Harmel, Rene Hoenig, Winfried Wolke, Harry Wirth, Daniel Biro, Ralf Preu

Abstract

On the way to higher efficiencies, back contact solar cells seem to be a promising alternative to the conventional screen-printed solar cells. Especially, the metal wrap through (MWT) solar cell concept with only two additional process steps is appropriate for a fast transfer to industry. Hence, an industrially feasible process based on a new contact design was developed and tested at the pilot-line of the Photovoltaic Technology Evaluations Center (PV-TEC). A maximum cell efficiency of 16% is achieved. Compared with conventionally processed cells made of the same mc Si-block, an efficiency gain of 0.5% absolute is observed. Due to a cell interconnection on the back the serial resistance losses in the tabs decrease. Therefore, a fill factor of almost 77% and an efficiency of 15% for a MWT module prototype (16 MWT cells) is reached.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.