Origami-foldable tessellated Crystalline-Si solar cell module with metal textile-based stretchable connections
Source abstract
Abstract
Abstract The increasing demand for photovoltaic (PV) electricity has resulted in wider usage for many applications. Current dominant PV electrical sources use crystalline silicon (c-Si) solar modules. These would provide greater potential as an energy source if they could be installed to any surface with a curvature, for example integration into buildings, and would perform better under omni-directional incident light, which is not considered in the design of current modules. In this study, we propose an origami-type foldable c-Si solar cell module by introducing a tessellated module design and textile-based woven metal connections to overcome the limitations of using c-Si solar cell modules on curved surfaces and under various light conditions. For the proposed module, two main concepts are introduced: a tessellation design for rigid folding and stretchable textile-based metal connections. The flexible crease pattern and interconnection allows the modules to be folded up to 180°, and a diagonal force on the metal textile can be induced on the inter-module connections using rotating wires. These features allow solar cell modules to cover an arbitrary surface without electrical degradation. Tessellating the module allows for maximum potential using the origami design when applied to both flat and curved surfaces. The origami-type foldable tessellated modules performed better than conventional modules. Their energy production under various angles of incident light is higher per day than that of flat modules, even during periods of lower intensity sunlight from a low solar altitude. These findings demonstrate a new approach to extend the usage of c-Si solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials and Mechanics · Advanced Sensor and Energy Harvesting Materials · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Performance assessment of BIPV/T double-skin façade for various climate zones in Australia: effects on energy consumption10.1016/j.solener.2020.02.044 ↗
2. Status of BIPV and BAPV System for less energy-hungry building in India: a review10.3390/app10072337 ↗
3. The optimum performance of building integrated photovoltaic (BIPV) windows under a semi-arid climate in Algerian office buildings10.3390/su12041654 ↗
4. Multi-objective design optimization of the reinforced composite roof in a solar vehicle10.3390/app10082665 ↗
5. Solar Potential assessment of public bus routes for solar buses10.1016/j.renene.2020.04.081 ↗
6. A comprehensive review on solar tricycles
7. Bend, stretch, and tough: locating a finger on an actively deformed transparent sensor array10.1126/sciadv.1602200 ↗
8. Recent developments and trends in biometrical10.1016/j.measurement.2004.11.002 ↗
9. Increasing trend of wearables and multimodal interface for human activity monitoring: a review10.1016/j.bios.2016.12.001 ↗
10. Photovoltaic and solar power forecasting for smart grid energy management10.17775/CSEEJPES.2015.00046 ↗
11. Building integrated photovoltaic system with energy storage and smart grid communication10.1109/TIE.2012.2222852 ↗
12. Transfer printed flexible and stretchable thin film solar cells using a water-soluble sacrificial layer10.1002/aenm.201601269 ↗
13. Corrugation enabled asymmetrically ultrastretchable (95%) monocrystalline silicon solar cells with high efficiency (19%)10.1002/aenm.201902883 ↗
14. All-solid-state surfactant sensing electrode using conductive polymer as internal electric contact10.1016/S0003-2670(01)00987-4 ↗
15. A highly stretchable, transparent, and conductive polymer
16. Materials and structures for stretchable energy storage and conversion devices10.1002/adma.201305919 ↗
17. Design and fabrication of screen-printed silver circuits for stretchable electronics10.1016/j.mee.2013.07.003 ↗
18. Finding 10% hidden electricity in crystalline Si solar cells using PDMS coating and three-dimensional cell arrays10.1002/pip.3246 ↗
19. Omni-direction PERC solar cells harnessing periodic locally focused light incident through patterned PDMS encapsulation10.1039/D0RA00439A ↗
20. The effect of accelerated aging tests on the optical properties of silicone and EVA encapsulants
21. Finite element modelling of fabric shear10.1088/0965-0393/17/1/015008 ↗