CH3NH3PbI3 converted from reactive magnetron sputtered PbO for large area perovskite solar cells
Source abstract
Abstract
Abstract Adopting DC reactive magnetron sputtering technique, PbO film was fabricated on FTO-glass substrate coated with a nanocrystalline rutile titania (NRT) by using a pure metallic lead target in an Ar/O2 mixture. Then the as-prepared PbO film was converted to CH3NH3PbI3 through the sequential reactions occurred in isopropanol solution of CH3NH3I. The as-prepared perovskite film exhibits a surface morphology of high uniformity and good coverage over a large scale; the crystal grains reach the size of up to 600 nm, which is beneficial for enhancing light absorption and decreasing grain boundary. The solar cells with a structure of FTO/NRT/CH3NH3PbI3/Spiro-MeOTAD/Au were fabricated, where NRT was employed as the contact layer of the photovoltaic devices. Our champion cells with active area of 0.09 cm2 and 1.07 cm2 achieve the highest power conversion efficiency of 14.1% and 10.7%, respectively, under the standard AM 1.5 conditions. The present approach is competent for the fabrication of large area perovskite solar cells with the advantages of easy control, cost-saving, and less use of toxic reagents, and thus with potential applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. G. Xing, N. Mathews, S. Sun, S.S. Lim, Y.M. Lam, M. Grätzel, et al., Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI3, Science, vol. 342(6156), pp. 344–347, 〈http://dx.doi.org/10.1126/science.1243167〉.10.1126/science.1243167 ↗
2. Electron-hole diffusion lengths exceeding 1μm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
3. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
4. T.M. Koh, K. Fu, Y. Fang, S. Chen, T.C. Sum, N. Mathews, Formamidinium-Containing Metal-Halide: An Alternative Material for Near-IR Absorption Perovskite Solar Cells, 2013.10.1021/jp411112k ↗
5. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
6. W.S. Yang, J.H. Noh, N.J. Jeon, Y.C. Kim, S. Ryu, J. Seo, et al., High-performance photovoltaic perovskite layers fabricated through intramolecular exchange, Science, vol. 348(6240), pp. 1234–1237, 〈http://dx.doi.org/10.1126/science.aaa9272〉.10.1126/science.aaa9272 ↗
7. solar energy materials & solar cells study of perovskite solar cells synthesized under ambient conditions and of the performance of small cell modules10.1016/j.solmat.2014.11.034 ↗
8. ScienceDirect High reproducibility of perovskite solar cells via a complete spin-coating sequential solution deposition process10.1016/j.solener.2015.08.028 ↗
9. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
10. High performance planar p-i-n perovskite solar cells with crown-ether functionalized fullerene and LiF as double cathode buffer layers10.1063/1.4928535 ↗
11. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
12. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
13. Planar heterojunction perovskite solar cells via vapor assisted solution process
14. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
15. M. Grätzel, L. Han, Efficient and Stable Large-area Perovskite Solar Cells with Inorganic Charge Extraction Layers, 2015, pp. 1–10, 〈http://dx.doi.org/10.1126/science.aad1015〉.10.1126/science.aad1015 ↗
16. An up-scalable approach to CH3NH3PbI3 compact films for high-performance perovskite solar cells10.1016/j.nanoen.2015.05.027 ↗
17. S. Moon, J. Yum, L. Linus, A. Walter, L. Sansonnens, M. Benkhaira, et al., Laser-Scribing Patterning for the Production of Organometallic Halide Perovskite Solar Modules, vol. 5, 2015, pp.1087–1092.10.1109/JPHOTOV.2015.2416913 ↗
18. Solid-state solar modules based on mesoscopic organometal halide perovskite: a route towards the up-scaling process10.1039/c3cp55313b ↗
19. Vertical tio2 nanorods as a medium for durable and high efficiency perovskite solar modules
20. Metal-oxide-free methylammonium lead iodide perovskite-based solar cells: the influence of organic charge transport layers
21. Square-Centimeter solution-processed planar CH3NH3PbI3 perovskite solar cells with efficiency exceeding 15%10.1002/adma.201502586 ↗
22. Perovskite solar cells and large area modules (100 cm2) based on an air flow-assisted PbI2 blade coating deposition process10.1016/j.jpowsour.2014.12.008 ↗
23. Electrodeposition of PbO and In situ conversion to CH3NH3PbI3 for mesoscopic perovskite solar cells10.1039/C4CC08269A ↗
24. Direct conversion of CH3NH3PbI3 from electrodeposited PbO for highly efficient planar perovskite solar cells10.1038/srep15889 ↗
25. Nanocrystalline rutile electron extraction layer enables low-temperature solution processed perovskite photovoltaics with 13.7% efficiency10.1021/nl500399m ↗
26. A. Manuscript, Faraday Discussions, 2014, 〈http://dx.doi.org/10.1039/C4FD00128A〉.10.1039/C4FD00128A ↗
27. The impact of precursor water content on solution-processed organometal halide perovskite films and solar cells
28. Moisture assisted perovskite film growth for high performance solar cells10.1063/1.4901510 ↗
29. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
30. Structural and optical properties of thin lead oxide films produced by reactive direct current magnetron sputtering10.1116/1.1410948 ↗
31. Reactive sputter-deposition and characterization of lead oxide films10.1116/1.580048 ↗
32. Charge accumulation and hysteresis in perovskite-based solar cells: an electro-optical analysis10.1002/aenm.201500829 ↗