Effect of molecular aggregation by thermal treatment on photovoltaic properties of MEH-PPV: Fullerene-based solar cells
Source abstract
Abstract
The effect of a thermal annealing treatment at various temperatures on the performance of bulk heterojunction photovoltaic cells based on poly[2-methoxy-5-(2′-ethyl-hexyloxy)-p-phenylene vinylene] (MEH-PPV) and buckminsterfullerene (C60) composites was investigated. With the increase in temperature, three stages were observed: from 60 to 120 °C, the photovoltaic performance of the composite devices became better with the rising temperature; from 120 to 180 °C, the photovoltaic performance decreased to a minimum; but, at about 200 °C, a sharp rise occurred, followed by a gradual decline. The obvious red-shift of the photoluminescence (PL) spectra and the new PL peak and shoulder at about 620 and 660 nm, respectively, indicated the formation of molecular aggregation and the lengthened and the ordered conjugated segments. It was suggested that the crystallization of C60 after thermal annealing at 200 °C, which matched the nano-sized ordered domains of MEH-PPV led to a sharp enhancement in photovoltaic performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Fullerene Chemistry and Applications · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
2. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
3. Fullerene bisadducts for enhanced open-circuit voltages and efficiencies in polymer solar cells
4. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
5. Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells10.1016/j.solmat.2006.10.008 ↗
6. Luminescent spectral changes in polymer light-emitting diodes after heat treatments10.1080/10587250008024959 ↗
7. The formation of crystalline P3HT fibrils upon annealing of a PCBM:P3HT bulk heterojunction10.1016/j.tsf.2005.12.123 ↗
8. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
9. Polythiophene based bulk heterojunction solar cells: morphology and its implications10.1016/j.tsf.2005.12.031 ↗
10. The importance of post-annealing process in the device performance of poly(3-hexylthiophene):methanofullerene polymer solar cell10.1016/j.solmat.2006.11.010 ↗
11. Effect of annealing of poly(3-hexylthiophene)/fullerene bulk heterojunction, composites on structural and optical properties10.1016/j.tsf.2005.09.093 ↗
12. Thermal treatment under reverse bias: effective tool for polymer/fullerene bulk heterojunction solar cells10.1016/j.synthmet.2007.12.015 ↗
13. The morphological dependence of charge transport in a soluble luminescent conjugated polymer10.1016/S1566-1199(02)00037-X ↗
14. Interchain excited states in annealed poly[2-methoxy-5-(2′-ethyl-hexyloxy)-p-phenylene vinylene] films10.1016/j.matlet.2006.03.134 ↗
15. Phase behavior and molecular aggregation in bulk poly(2-methoxy-5-(2′-ethylhexylox)-1,4-phenylenevinylene)10.1021/ma034703n ↗
16. Supramolecular aggregation in bulk poly(2-methoxy-5-(2′-ethylhexylox)-1,4-phenylenevinylene)10.1021/ma025505j ↗
17. Enhanced photovoltaic properties of polymer–fullerene bulk heterojunction solar cells by thermal annealing10.1016/j.ssc.2007.01.034 ↗
18. The effect of thermal treatment on the morphology and charge carrier dynamics in a polythiophene–fullerene bulk heterojunction10.1002/adfm.200400559 ↗
19. Aggregation quenching of luminescence in electroluminescent conjugated polymers10.1021/jp9839450 ↗
20. Synthesis and characterization of a novel light-emitting polymer containing highly efficient hole-transporting aromatic diamine10.1021/cm980498s ↗
21. The effect of different heat treatments on the luminescence efficiency of polymer light-emitting diodes10.1002/(SICI)1521-4095(200006)12:11<801::AID-ADMA801>3.0.CO;2-G ↗
22. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
23. Poly(3-buthyl-co-3,4-dibuthylthiophene)s-synthesis and electrochromic characterization10.1016/0379-6779(94)02492-H ↗
24. Enhanced hole mobility in poly-(2-methoxy-5-(2′-ethylhexoxy)-1,4-phenylenevinylene) by elimination of nanometer-sized domains10.1002/adma.200500331 ↗
25. Analysis of the photocurrent action spectra of MEH-PPV polymer photodiodes10.1103/PhysRevB.55.7831 ↗
26. Photocurrent in an electron transporting luminescent polymer10.1063/1.125855 ↗
27. Charge photogeneration and recombination in poly[2-methoxy-5-(2′-ethyl-hexoxy-p-phenylene vinylene]:fullerene composite films studied by photocurrent response10.1016/j.tsf.2007.05.073 ↗
28. Charge transport and photocurrent generation in poly(3-hexylthiophene):methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
29. Composition dependence of electron and hole transport in polyfluorene:6,6-phenyl C61-butyric acid methyl ester blend films10.1063/1.1628826 ↗
30. Temperature and electric-field dependences of hole mobility in light-emitting diodes based on poly[2-methoxy-5-(2-ethylhexoxy)-1,4-phenylene vinylene]10.1063/1.1968445 ↗
31. Electric field-induced quenching of photoluminescence in the MEH-PPV:C60 composite thin film10.1016/j.cplett.2007.06.039 ↗
32. Morphology and thermal stability of the active layer in poly(p-phenylenevinylene)/methanofullerene plastic photovoltaic device10.1021/ma035620+ ↗
33. Thermal characterization and annealing effects of polythiophene/fullerene photoactive layers for solar cells10.1016/j.tsf.2005.12.092 ↗