π-Conjugated polymer/GaN Schottky solar cells
Source abstract
Abstract
Abstract We developed heterojunction-based Schottky solar cells consisting of π-conjugated polymers and n-type GaN. Poly (3,4-ethylendioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) was used as the transparent Schottky contact material and their electrical properties were investigated in comparison with those of a polyaniline (PANI) Schottky contact. The PEDOT:PSS/n-GaN/sapphire (0 0 0 1) sample exhibited high-quality rectifying characteristics with a low reverse leakage current of less than 10−8 A/cm2 at a reverse bias voltage of −3 V. While investigating the photovoltaic performance, it was observed that the open-circuit voltage of the PEDOT:PSS/n-GaN/sapphire (0 0 0 1) sample reached 0.8 V, which was much superior to the photovoltage reported for a conventional metal/GaN Schottky photodetector. We also confirmed that the PEDOT:PSS is as promising a material as PANI for π-conjugated polymer/GaN Schottky solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · GaN-based semiconductor devices and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. When group-III nitrides go infrared: new properties and perspectives10.1063/1.3155798 ↗
2. InGaN/GaN multiple quantum well solar cells with long operating wavelengths10.1063/1.3081123 ↗
3. Growth, fabrication, and characterization of InGaN solar cells, Phys10.1002/pssa.200778695 ↗
4. High quantum efficiency InGaN/GaN solar cells with 2.95eV band gap10.1063/1.2988894 ↗
5. Design and characterization of GaN/InGaN solar cells10.1063/1.2793180 ↗
6. Theoretical possibilities of InxGa1−xN tandem PV structures10.1016/j.solmat.2004.08.020 ↗
7. High doping level in Mg-doped GaN layers grown at low temperature10.1063/1.2829819 ↗
8. Highly conductive polymer anodes as replacements for inorganic materials in high-efficiency organic light-emitting diodes10.1002/adma.200602156 ↗
9. Metallic transport in polyaniline10.1038/nature04705 ↗
10. Organic light-emitting diode with polyaniline-poly(styrene sulfonate) as a hole injection layer10.1016/j.tsf.2007.08.088 ↗
11. Transparent polymer Schottky contact for a high performance visible-blind ultraviolet photodiode based on ZnO10.1063/1.2989125 ↗
12. Matsuki · Appl. Phys. Express · 2009 · 2 · 092201-110.1143/APEX.2.092201 ↗
13. Electrical and optical properties of Al-doped ZnO–SnO2 thin films deposited by RF magnetron sputtering10.1016/j.tsf.2007.10.055 ↗
14. GaN metal–semiconductor–metal ultraviolet photodetector with IrO2 Schottky contact10.1063/1.1524035 ↗
15. Fabrication and device characteristics of Schottky-type bulk GaN-based “visible-blind” ultraviolet photodetectors10.1063/1.2715114 ↗
16. Electronic states and effective negative electron affinity at cesiated p-GaN surfaces10.1063/1.371191 ↗
17. Photovoltaic properties of ZnO/CdTe heterojunctions prepared by spray pyrolysis10.1063/1.328243 ↗
18. Electronic structure of organic interfaces: a case study on perylene derivatives10.1007/s00339-005-3368-0 ↗
19. Electron affinity of AlxGa1−xN (0001) surfaces10.1063/1.1367275 ↗