journal article·2013-07

In situ reflectance imaging of organic thin film formation from solution deposition

Jonas Bergqvist, Scott A. Mauger, Kristofer Tvingstedt, Hans Arwin, Olle Inganäs

Publisher page

Abstract

In this work we present reflectance imaging as a suitable method for in situ monitoring of the drying process of film formation for organic photovoltaics (OPV) over large areas, as well as for lab-scale spin-coating. The drying wet film is illuminated with a narrow bandwidth LED with the specularly reflected light recorded by a video camera as the film dries and forms the active layer of the OPV cell. The interference fringes generated by the thinning wet film can be used to measure the rate of solvent evaporation and the drying time. Subsequent mapping elucidates variations in drying conditions over the substrate, which lead to variations in morphology formation. The technique is suitable for tracking thickness variations of the dry film, with a sensitivity of ≈10 nm, by comparing the intensity of the reflected light from the dry film to simulated interference conditions calculated for each thickness. The drying process is furthermore accurately simulated by an optical model considering the changes in refractive index as the amount of solvent decreases with respect to the solid content. This non-invasive in situ method represents an important monitoring tool for future large scale OPV manufacturing where high performing morphologies with uniform thickness have to be formed over very large areas.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Stability of polymer solar cells10.1002/adma.201104187 ↗
2. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
5. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
6. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
7. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
8. Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C60 heterojunction photovoltaic cell10.1063/1.115797 ↗
9. On the morphology of polymer-based photovoltaics10.1002/polb.23063 ↗
10. Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells10.1002/adfm.200305026 ↗
11. Moving through the phase diagram: morphology formation in solution cast polymer–fullerene blend films for organic solar cells10.1021/nn2036279 ↗
12. In situ monitoring the drying kinetics of knife coated polymer–fullerene films for organic solar cells10.1063/1.3270402 ↗
13. Quantitative evaluation of evaporation rate during spin-coating of polymer blend films: control of film structure through defined-atmosphere solvent-casting10.1140/epje/i2010-10670-7 ↗
14. Morphology of MDMO–PPV:PCBM bulk heterojunction organic solar cells by AFM, KFM and TEM
15. Lateral phase separation gradients in spin-coated thin films of high-performance polymer: fullerene photovoltaic blends10.1002/adfm.201100566 ↗
16. Effects of active layer thickness and thermal annealing on polythiophene: fullerene bulk heterojunction photovoltaic devices10.1063/1.3474654 ↗
17. Modeling the optical absorption within conjugated polymer/fullerene-based bulk-heterojunction organic solar cells10.1016/S0927-0248(03)00137-5 ↗
18. An optical spacer is no panacea for light collection in organic solar cells10.1063/1.3073710 ↗
19. An interfacial instability in a transient wetting layer leads to lateral phase separation in thin spin-cast polymer-blend films10.1038/nmat1476 ↗
20. Time-resolved light scattering studies of phase separation in thin film semiconducting polymer blends during spin-coating10.1021/ma0477145 ↗
21. Spatially resolved drying kinetics of multi-component solution cast films for organic electronics10.1016/j.cep.2010.12.012 ↗
22. Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymerfullerene solar cells10.1016/j.solmat.2011.09.059 ↗
23. The development of nanoscale morphology in polymer:fullerene photovoltaic blends during solvent casting10.1039/c0sm00343c ↗
24. Real-time studies during coating and post-deposition annealing in organic semiconductors10.1016/j.tsf.2010.12.228 ↗
25. Probing the early stages of solvent evaporation and relaxation in solvent-cast polymer thin films by spectroscopic ellipsometry10.1002/sia.3728 ↗
26. In situ imaging and height reconstruction of phase separation processes in polymer blends during spin coating10.1021/nn201210e ↗
27. Laser interferometric calibration for real-time video color interpretation of thin fluid layers during spin coating10.1016/j.optlaseng.2009.12.021 ↗
28. Quality control of roll-to-roll processed polymer solar modules by complementary imaging methods10.1016/j.solmat.2011.10.005 ↗
29. An easily synthesized blue polymer for high-performance polymer solar cells10.1002/adma.201002225 ↗
30. Fullerene-based n-type semiconductors in organic electronics
31. Dielectric function representation by B-splines
32. Spin-cast, thin, glassy polymer films: highly metastable forms of matter10.1007/s101890170024 ↗
33. Simple interferometric microscopy for in situ real-time two-dimensional observation of crystal growth10.1063/1.1147190 ↗
34. Wohlfarth · 1996
35. Mixed solvents for reproducible photovoltaic bulk heterojunctions10.1117/1.3606393 ↗
36. A photophysical study of PCBM thin films10.1016/j.cplett.2007.08.005 ↗
37. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗