Use of indentation to study the degradation of photovoltaic backsheets
Source abstract
Abstract
Abstract The ability of electrical insulating materials within a module to act as insulators is a key safety requirement for photovoltaic (PV) technology. Presently, however, the durability of backsheets may not be readily assessed. For example, the mechanical tensile test continues to be developed, and its use has not been validated such that a technically based pass/fail criteria may be established. This study examines the use of simple indentation methods, including durometer hardness and instrumented indentation, as a means to quantitively assess the degradation of PV backsheets. Characteristics including: hardness, modulus, load/displacement profile, creep hold response, and residual impression are explored in an empirical study. Glass/encapsulant/backsheet mini-modules constructed using backsheets including: polyamide (specifically the AAA backsheet product), poly(ethylene terephthalate) (PET), polyvinyl fluoride (PVF) laminate (“TPE”), and polyvinylidene fluoride (PVDF) were examined. An M-type durometer as well as Berkovich and cube-corner tips were used in the indentation experiments. Additional characterizations were performed to interpret the indentation measurements including: surface roughness measurements using atomic force microscopy (AFM), a chemical structure study using Fourier-transform infrared spectroscopy (FTIR), and phase-transition measurements using differential scanning calorimetry (DSC). The results are analyzed in the context of the combined accelerated stress test (C-AST) also explored in this study. Instrumented indentation (i.e., using a Berkovich tip) was able to distinguish between backsheets and quantify the effects of accelerated testing (including up to 60%, 25%, and 20% change in hardness, modulus, and creep displacement, respectively). The embrittlement of the backsheets was not readily assessable using cube-corner indentation. Cracking of the known-bad polyamide backsheet was observed from the C-AST, which was not observed to result from steady state UV weathering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Electrostatic Discharge in Electronics · Electrical Fault Detection and Protection
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. IEC 61730-1 · 2016 · 1
2. Evaluation of PV module field performance
3. Field study and analysis of backsheet degradation in 450MW+ PV installations
4. Comparison of accelerated UV test methods with Florida exposure for photovoltaic backsheet materials
5. ISO 7619-1 · 2010 · 1
6. ISO 6507-1 · 2005 · 1
7. ASTM A1038 · 2013 · 1
8. ISO 16859-1 · 2015 · 1
9. ISO 48 · 2010 · 1
10. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
11. A new method for analyzing data from continuous depth-sensing microindentation10.1557/JMR.1990.0123 ↗
12. Mapping chemical and mechanical property degradation in photovoltaic modules
13. Depth profiling of mechanical degradation of PV backsheets after UV exposure
14. Finite element modeling of nanoindentation10.1063/1.369178 ↗
15. IEC TS 62788-7-2 · 2017 · 1
16. Degradation in PV encapsulation transmittance: an interlaboratory study towards a climate-specific test
17. Survey of mechanical durability of PV backsheets
18. Sequential testing that better predicts field performance
19. An improved accelerated weathering protocol to anticipate Florida exposure behavior of coatings10.1007/s11998-012-9467-x ↗
20. ASTM D7869 · 2017 · 1
21. Combined-accelerated stress testing system for photovoltaic modules
22. Combined and sequential accelerated stress testing for derisking photovoltaic modules
23. Combined-accelerated stress testing for advanced reliability assessment of photovoltaic modules
24. Sequential stress testing to predict photovoltaic module durability
25. King · 2004 · 1
26. ISO 18898 · 2016 · 1
27. D.C. Miller, J. Morse, I.A. Tappan, J.J. Eafanti, B.K. McDanold, T. Lockman, N.S. Bosco, “A Comparison of the Breakdown Voltage of Contemporary and Veteran Backsheets,” Xxx in Review.
28. Latest advances in substrates for flexible electronics
29. Degradation and cracking behavior of polyamide-based backsheet subjected to sequential fragmentation test
30. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
31. Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments10.1557/JMR.1998.0185 ↗
32. ISO 14577-1 · 2015 · 1
33. Evaluation of high-temperature exposure of photovoltaic modules10.1002/pip.1103 ↗
34. “Nanoindentation characterization of coated systems: P:S2 – a new approach using the continuous stiffness technique10.1557/PROC-522-53 ↗
35. Fast and non-destructive determination of the EVA cross-linking degree for in-line and off-line application
36. Evaluation of gel content-measurement-method for mass production of glass-foil based crystalline silicon PV modules
37. “Yellowing of PV backsheets in accelerated tests can be used as a realistic indication of possible field failures – fact or fiction?