journal article·2016-07

Photoelectrochemical water splitting using Cu(In,Al)Se2 photoelectrodes developed via selenization of sputtered Cu–In–Al metal precursors

Kong-Wei Cheng, Kei Hinaro, Mini Pothanadu Antony

Publisher page

Abstract

Abstract Chalcopyrite p-type quaternary CuIn x Al 1− x Se 2 ( x =0.44−0.74) semiconductor photoelectrodes are prepared on various substrates via the reactive selenization of radio-frequency-sputtered Cu–In–Al metal precursors. The influence of the aluminum content in the quaternary CuIn x Al 1− x Se 2 photoelectrodes on the structural, optical and photoelectrochemical properties of CuIn x Al 1− x Se 2 samples is investigated. X-ray diffraction patterns and energy-dispersive analysis of X-rays results reveal that the metal precursors can be converted into the tetragonal CuIn x Al 1− x Se 2 phase after the selenizations process under a Se atmosphere at a temperature of 570 °C for 1 h. The energy band gaps of samples are tuned by varying the aluminum content in samples. The direct energy band gap of samples increases from 1.25 to 1.8 eV when the [Al]/[Al+In] molar ratio in samples increases from 0.26 to 0.56. The mobility and carrier density of samples are in the ranges of 1.06–5.86 cm 2 V −1 s −1 and 8.23×10 16 –2.34×10 19 cm −3 , respectively. The sample with an [Al]/[Al+In] molar ratio of 0.34 has the highest photoelectrochemical performance in aqueous H 2 SO 4 solution with the applied bias photon-to-current efficiency (ABPCE) and photo-enhanced ABPCE of 8.99% and 3.61% at an applied voltage of −1.0 V vs. an Ag/AgCl electrode, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Semiconductor-based photocatalysts and photoelectrochemical cells for solar fuel generation: a review10.1039/C4CY00974F ↗
2. Visible-light driven heterojunction photocatalysts for water splitting – a critical review10.1039/C4EE03271C ↗
3. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
4. A simple, low-cost CVD route to thin films of BiFeO3 for efficient water photo-oxidation10.1039/c3ta14824f ↗
5. Chemically modified nanostructures for water splitting10.1016/j.jphotochemrev.2013.10.006 ↗
6. Efficient photoelectrochemical water splitting using three dimensional urchin-like hematite nanostructure modified with reduced graphene oxide10.1016/j.jpowsour.2015.04.042 ↗
7. Collidal hybrid heterostructures based on II-VI semiconductor nanocrystals for photocatalytic hydrogen generation10.1016/j.jphotochemrev.2013.12.001 ↗
8. Photocatalyst materials for water splitting10.1023/A:1023480507710 ↗
9. Preparation of chemical bath synthesized ternary Ag-Sn- S thin filmsas the photoelectrodes in photoelectrochemical cell10.1016/j.jpowsour.2014.11.045 ↗
10. Ternary AgInSe2 film electrodes created using selenization of RF. magnetron sputtered Ag-In metal precursor for photoelectrochemical applications10.1016/j.ijhydene.2012.02.044 ↗
11. Photoelectrochemical characterization of CIGS thin films for hydrogen production10.1016/j.solmat.2004.10.011 ↗
12. Photochemical hydrogen production with cadmium sulfide suspensions10.1021/j150659a025 ↗
13. Photoelectrochemical reduction of nitrite ions to ammonia on CdS photocatalysts10.1016/S1010-6030(02)00271-X ↗
14. Oxysulfide Sm2Ti2S2O5 as a stable photocatalyst for water oxidation and reduction under visible light irradiation (λ≤650 nm)10.1021/ja0269643 ↗
15. Preparation and characterization of ZnIn2S4 thin films deposited by spray pyrolysis for hydrogen production10.1016/j.ijhydene.2008.04.008 ↗
16. Photoelectrochemical study of ZnIn2Se4 electrodes fabricated using selenization of RF magnetron sputtered ZneIn metal precursors
17. Catalytic and photoelectrochemical performances of Cu–Zn–Sn–Se thin films prepared using selenization of electrodeposited Cu–Zn–Sn metal precursors10.1016/j.jpowsour.2015.03.101 ↗
18. A monolithic photovoltaic-photoelectrochemical device for hydrogen production via water splitting10.1126/science.280.5362.425 ↗
19. Ternary and quaternary metal chalcogenide nanocrystals: synthesis, properties and applications10.1039/c3tc30273c ↗
20. Cu(In,Ga)Se2 thin-film solar cells and modules - A boost in efficiency due to potassium10.1109/JPHOTOV.2014.2377516 ↗
21. Photoelectrochemical hydrogen evolution from water using copper gallium selenide electrodes prepared by a particle transfer method10.1021/jp409921f ↗
22. Document Enhanced photoelectrochemical properties of CuGa3Se5 thin films for water splitting by the hydrogen mediated co-evaporation method10.1039/C1EE02280F ↗
23. CuIn1−xAlxSe2 thin films and solar cells10.1063/1.1476966 ↗
24. Effect of Al addition on the characteristics of Cu(In,Al)Se2 solar cells10.1016/j.jcrysgro.2008.09.135 ↗
25. ASM handbook: alloy phase diagrams
26. Preparation and characterization of CuInxAl1-xS2 films using the sulfurization of metal precursors for photoelectrochemical applications10.1016/j.jtice.2012.12.013 ↗
27. An investigation on silar Cu(In1−xAlx)Se2 thin films10.1016/j.mseb.2010.03.028 ↗
28. Growth of single-phase Cu(In,Al)Se2 photoabsorbing films by selenization using diethylselenide10.1016/j.tsf.2008.10.083 ↗
29. High-efficiency solar cells based on Cu(InAl)Se2 thin films10.1063/1.1499990 ↗
30. Influence of substrate temperature on structural, optical, and electrical properties of flash evaporated CuIn0.81Al0.19Se2 thin films10.1016/j.matchemphys.2013.01.034 ↗
31. Lide · 1994
32. Crystallographic properties and elemental migration in two-stage prepared CuIn1-xAlxSe2 thin films for photovoltaic applications10.1016/j.jallcom.2013.03.091 ↗
33. Real-time investigations of selenization reactions in the system Cu–In–Al–Se10.1002/pssa.200669558 ↗
34. Thermochemistry of the Cu2Se–In2Se3 system10.1016/j.jallcom.2014.03.129 ↗
35. Study of the chalcopyrite Cu(In,Al)Se2 crystalline growth by selenization of different evaporated precursors ratios10.1016/j.jcrysgro.2011.09.040 ↗
36. Cu(In,Al)Se2 thin films by one-step electrodeposition for photovoltaics10.1016/j.tsf.2013.10.180 ↗
37. Optical and electrical properties of SnO2 thin films in relation to their stoichiometric deviation and their crystalline structure10.1016/0040-6090(77)90395-9 ↗
38. Light-induced redox reactions in nanocrystalline systems10.1021/cr00033a003 ↗
39. CuIn1−xAlxSe2 thin films obtained by selenization of evaporated metallic precursor layers10.1016/j.tsf.2008.10.095 ↗
40. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
41. Selenization of co-sputtered CuInAl precursor films10.1016/j.solmat.2009.12.005 ↗
42. Cu4{Se2P(OiPr)2}4]: A novel precursor enabling preparation of nonstoichiometric copper selenide (Cu2–xSe) nanowires10.1021/cm060478n ↗
43. Band structure and transport studies of copper selenide: an efficient thermoelectric material10.1063/1.4900927 ↗
44. CIGS based devices for solar hydrogen production spanning from PEC-cells to PV-electrolyzers: A comparison of efficiency, stability and device topology10.1016/j.solmat.2014.11.041 ↗
45. CuInxGa1-xSe2 as an efficient photocathode for solar hydrogen generation10.1016/j.ijhydene.2013.09.094 ↗
46. Solar water splitting cell10.1021/cr1002326 ↗
47. Newman · 2004
48. Ternary CuInS2 photoelectrodes created using the sulfurization of Cu–In metal precursors for photoelectrochemical applications10.1016/j.materresbull.2013.02.085 ↗
49. Studies on the electrochemical stability of CIGS in H2SO410.1016/j.jphotochem.2004.04.006 ↗