Solid state dye-sensitized photovoltaic micro-wires (DSPMs) with carbon nanotubes yarns as counter electrode: Synthesis and characterization
Source abstract
Abstract
Abstract Innovative all solid state dye-sensitized photovoltaic micro-wires (DSPMs) have been developed using low-cost, thermally-stable and highly conductive titanium micro-wires and carbon nanotubes yarns (CNYs). Highly inter-aligned, ultrastrong and flexible CNYs with excellent electrical conductivity, mechanical integrity and catalytic property have been successfully used as counter electrodes (CEs). The open circuit voltage and current density of the DSPMs can remarkably be improved through optimizing the numbers of CNYs and CNYs–TiO2 interface. Optimizing the number of CNYs in the CEs yields a photoconversion efficiency of 0.1959% with prolonged-time stability. The DSPMs were made without expensive transparent conductive oxides (TCOs), liquid electrolytes and glass or plastic cladding. The DSPMs are able to transport photocurrent over a significant distance using a simple cell configuration with a wide range of flexibility (10–180°). These cells are capable of efficiently harvesting incident photon from any direction and generate photocurrent with an efficient reproducibility throughout a large number of illumination on–off cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. High molar extinction coefficient heteroleptic ruthenium complexes for thin film dye-sensitized solar cells10.1021/ja058540p ↗
3. Synthesis of TiO2 nanotube arrays and its application in mini-3D dye-sensitized solar cells10.1088/0022-3727/43/20/205103 ↗
4. Wire-shaped flexible dye-sensitized solar cells10.1002/adma.200701249 ↗
5. High-efficiency dye-sensitized solar cells: the influence of lithium ions on exciton dissociation, charge recombination, and surface states10.1021/nn101384e ↗
6. Enhance the optical absorptivity of nanocrystalline TiO2 film with high molar extinction coefficient ruthenium sensitizers for high performance dye-sensitized solar cells10.1021/ja801942j ↗
7. Counter-electrode function in nanocrystalline photoelectrochemical cell configurations10.1016/j.ccr.2004.03.028 ↗
8. Counter electrodes for DSC: application of functional materials as catalysts10.1016/j.ica.2007.09.025 ↗
9. Transparent conductive oxide-less, flexible, and highly efficient dye-sensitized solar cells with commercialized carbon fiber as the counter electrode10.1039/c1jm12056e ↗
10. All-carbon electrode-based fiber-shaped dye-sensitized solar cells10.1039/C1CP22613D ↗
11. Fibrous flexible solid-type dye-sensitized solar cells without transparent conducting oxide10.1063/1.2891051 ↗
12. Flexible dye-sensitized solar cells by 28GHz microwave irradiation10.1016/j.jphotochem.2004.01.026 ↗
13. Low-temperature fabrication of dye-sensitized plastic electrodes by electrophoretic preparation of mesoporous TiO2 layers10.1149/1.1796931 ↗
14. Low-temperature fabrication of dye-sensitized solar cells by transfer of composite porous layers10.1038/nmat1433 ↗
15. Highly efficient plastic-substrate dye-sensitized solar cells with validated conversion efficiency of 7.6%10.1016/j.solmat.2009.12.029 ↗
16. High-efficiency (7.2%) flexible dye-sensitized solar cells with Ti-metal substrate for nanocrystalline-TiO2 photoanode10.1039/B608279C ↗
17. Mechanical integrity of dye-sensitized photovoltaic fibers10.1016/j.renene.2007.05.029 ↗
18. Dye-sensitized photovoltaic wires using highly ordered TiO2 nanotube arrays10.1021/nn9015696 ↗
19. Fiber based organic photovoltaic devices10.1063/1.2927533 ↗
20. Solar power wires based on organic photovoltaic materials10.1126/science.1168539 ↗
21. A photovoltaic fiber design for smart textiles10.1177/0040517509352520 ↗
22. An investigation of DNA-like structured dye-sensitized solar cells10.1016/j.cap.2009.05.006 ↗
23. Optical fiber/nanowire hybrid structures for efficient three-dimensional dye-sensitized solar cells10.1002/anie.200904492 ↗
24. Dye-sensitized solar cell tube10.1016/j.solmat.2012.03.029 ↗
25. Photovoltaic fiber10.1016/j.tsf.2008.11.057 ↗
26. Photoactive TiO2 films on cellulose fibres: synthesis and characterization10.1016/j.jphotochem.2007.02.015 ↗
27. Control of dark current in photoelectrochemical (TiO2/I−–I3−) and dye-sensitized solar cells10.1039/b505718c ↗
28. Influence of TiCl4 treatment on performance of dye-sensitized solar cell assembled with nano-TiO2 coating deposited by vacuum cold spraying10.1016/S1001-0521(07)60066-7 ↗
29. An electrical model of the dye-sensitized solar cell10.1016/S0927-0248(98)00005-1 ↗
30. Enhanced charge-collection efficiencies and light scattering in dye-sensitized solar cells using oriented TiO2 nanotubes arrays10.1021/nl062000o ↗
31. Dye-sensitized solar cells based on anatase TiO2 hollow spheres/carbon nanotube composite films10.1016/j.jpowsour.2011.05.014 ↗
32. Electron storage in single wall carbon nanotubes. Fermi level equilibration in semiconductor-SWCNT suspensions10.1021/nn700036f ↗
33. Effects of ZnS:Mn concentrated vinyl ester matrices under flexural loading on the triboluminescent yield10.1016/j.jlumin.2012.01.056 ↗
34. Development of a triboluminescence-based sensor system for concrete structures10.1177/1475921711414231 ↗
35. D.O. Olawale, T. Dickens, M.J. Uddin, O.I. Okoli, Triboluminesence multifunctional cementitious composites with in situ damage sensing capability, in: M. Tomizuka, C.B. Yun, J.P. Lynch (Eds.), Proceedings of SPIE: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, San Diego, California, 2012, pp. 834538
36. It is remarked that the proposed application of the DSPM is a structural health monitoring system (SHM). It will also provide photovoltaic energy conversion. In particular, the aerospace industry spends 27% of its average life cycle cost on damage detection/inspection. Additionally, present damage monitoring systems consist of conventional strain gauges and or microprocessor based electronics which need external power supply. We are currently developing the capability for utilizing solid state DSPMs as photoconverters in a unique triboluminescent (TL) SHM system. This system when incorporated into advanced composite components will provide critical Go/No–Go information enhancing safety and operational cost effectiveness. This will remarkably reduce the operational down time and inspection/maintenance cost of aerovehicles.
37. Electronic textiles charge ahead10.1126/science.301.5635.909 ↗