A simple and robust route toward flexible CIGS photovoltaic devices on polymer substrates: Atomic level microstructural analysis and local opto-electronic investigation
Source abstract
Abstract
Abstract In this work, copper indium gallium selenide (Cu(In,Ga)Se2; CIGS) absorbers were grown on polyimide (PI)/molybdenum substrates by a three-stage co-evaporation process at various temperatures, film formation was systemically studied using various advanced characterization methods such as transmission electron microscopy, micro-Raman spectroscopy, Kelvin probe force microscopy, and atom probe tomography. The CIGS films on PI were found to exhibit considerable physical and electrical variations with respect to the process temperature of three-stage co-evaporation. In particular, when the process temperature reached 400 °C, the CIGS absorber on PI began to exhibit controlled microstructure and intergrain properties. By adjusting the microstructure and intergrain properties of the absorber films by means of the process temperature of three-stage co-evaporation, flexible CIGS solar cells on PI with an efficiency of 16.7% (with anti-refection coating) were achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
3. Cu(In,Ga)(Se,S)2 solar cell research in Solar Frontier: progress and current status10.7567/JJAP.56.04CA02 ↗
4. New world record Cu (In,Ga)(Se,S)2 thin film solar cell efficiency beyond 22%
5. Selenium flux effect on Cu(in,Ga)Se2 thin films grown by a 3-stage Co-evaporation process10.1002/ijch.201500011 ↗
6. Progress in thin film CIGS photovoltaics – research and development, manufacturing, and applications
7. Development of semitransparent CIGS thin-film solar cells modified with a sulfurized-AgGa layer for building applications10.1039/C6TA01909A ↗
8. Alternative device structures for CIGS-based solar cells with semi-transparent absorbers10.1016/j.nanoen.2016.10.038 ↗
9. Effect of three-stage growth modification on a CIGS microstructure10.1109/JPHOTOV.2016.2598264 ↗
10. Review of progress toward 20% efficiency flexible CIGS solar cells and manufacturing issues of solar modules10.1109/JPHOTOV.2012.2226869 ↗
11. Highly efficient flexible hybrid nanocrystal‐Cu(in,Ga)Se2 (CIGS) solar cells10.1002/aenm.201401280 ↗
12. Control of Ga profiles in (AgCu)(InGa)Se2 absorber layers deposited on polyimide substrates
13. 12.8% efficiency Cu(In,Ga)Se2 solar cell on a flexible polymer sheet10.1002/(SICI)1099-159X(199909/10)7:5<393::AID-PIP289>3.0.CO;2-4 ↗
14. High quality baseline for high efficiency, Cu(In1−x,Gax)Se2 solar cells10.1002/pip.757 ↗
15. Influence of Ni and Cr impurities on the electronic properties of Cu(In,Ga)Se2 thin film solar cells10.1002/pip.2503 ↗
16. Influence of iron on the performance of CIGS thin-film solar cells10.1016/j.solmat.2014.06.038 ↗
17. Cu(In,Ga)Se2 solar cells on stainless steel substrates covered with insulating layers10.1016/S0927-0248(02)00099-5 ↗
18. Cu(InGa)Se2 photovoltaics on insulated Stainless Steel Web substrate
19. Effects of NaF coevaporation on structural properties of Cu(In,Ga)Se2 thin films10.1016/S0040-6090(03)00246-3 ↗
20. Na incorporation in Cu(in,Ga)(Se,S)2 films grown on insulator-coated stainless steel foil using a metal precursor reaction10.1109/JPHOTOV.2015.2435366 ↗
21. High efficiency low temperature grown Cu(In,Ga)Se2 thin film solar cells on flexible substrates using NaF precursor layers10.1002/pip.1064 ↗
22. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
23. Investigation of local electronic transport and surface potential distribution of Cu(In,Ga)Se2 thin-films10.1016/j.cap.2012.03.016 ↗
24. In-situ annealing of Cu(In,Ga)Se2 films grown by elemental co-evaporation
25. Preferred orientation control of Cu(In1-xGax)Se2 (x≈ 0.28) thin films and its influence on solar cell characteristics10.1143/JJAP.41.507 ↗
26. Progress toward 20% efficiency in Cu(In,Ga)Se2 polycrystalline thin-film solar cells10.1002/(SICI)1099-159X(199907/08)7:4<311::AID-PIP274>3.0.CO;2-G ↗
27. High-efficiency Cu(In,Ga)Se2 cells and modules10.1016/j.solmat.2013.05.002 ↗
28. Incongruent reaction of Cu–(InGa) intermetallic precursors in H2Se and H2S10.1063/1.2787151 ↗
29. Three-step H2Se/Ar/H2S reaction of Cu-In-Ga precursors for controlled composition and adhesion of Cu(In,Ga)(Se,S)2 thin films10.1063/1.4704390 ↗
30. The role of gallium in CuInSe2 solar cells fabricated by a two-stage method
31. Preparation of homogeneous Cu(InGa)Se2 films by selenization of metal precursors in H2Se atmosphere10.1063/1.114424 ↗
32. Composition and bandgap control in Cu(In,Ga)Se2-based absorbers formed by reaction of metal precursors10.1002/pip.2494 ↗
33. Key near-term R&D issues for continuous improvement in CIS-based thin-film PV modules10.1016/j.solmat.2008.11.063 ↗
34. High photo‐conversion efficiency in double‐graded Cu (In,Ga)(S,Se)2 thin film solar cells with two‐step sulfurization post‐treatment10.1002/pip.2833 ↗
35. Raman investigations of Cu (In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
36. Applications of atomic layer deposition in solar cells10.1088/0957-4484/26/6/064001 ↗
37. Defect physics of the CuInSe2 chalcopyrite semiconductor10.1103/PhysRevB.57.9642 ↗
38. Fermi level pinning and effects on CuInGaSe2-based thin-film solar cells10.1088/0268-1242/24/5/055016 ↗
39. Effect of substrate temperature on the structural and electrical properties of CIGS films based on the one-stage co-evaporation process10.1088/0268-1242/25/5/055007 ↗
40. Effects of substrate temperature on the structural and electrical properties of Cu(In,Ga)Se2 thin films10.1016/j.solmat.2008.09.002 ↗
41. Effect of substrate temperature and depostion profile on evaporated Cu(InGa)Se2 films and devices10.1016/S0040-6090(99)00844-5 ↗
42. Characterization of Cu(In,Ga)Se2 films by Raman scattering10.1016/S0254-0584(01)00345-5 ↗
43. Optical and surface probe investigation of secondary phases in Cu2ZnSnS4 films grown by electrochemical deposition10.1016/j.solmat.2015.03.003 ↗
44. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
45. Characterization of grain boundaries in Cu(in,Ga)Se2 films using atom-probe tomography10.1109/JPHOTOV.2011.2170447 ↗
46. Confined and chemically flexible grain boundaries in polycrystalline compound semiconductors10.1002/aenm.201100764 ↗
47. Surface passivation of polycrystalline, chalcogenide based photovoltaic cells10.1016/0379-6787(91)90037-P ↗
48. Effects of sodium on polycrystalline Cu(in,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
49. Na-induced effects on the electronic structure and composition of Cu(In,Ga)Se2 thin-film surfaces10.1063/1.115783 ↗
50. Molecular-ink route to 13.0% efficient low-bandgap CuIn(S,Se)2 and 14.7% efficient Cu (In,Ga)(S,Se)2 solar cells10.1039/C5EE02870A ↗
51. Effects of Se flux on the microstructure of Cu(in,Ga)Se2 thin film deposited by a three-stage Co-evaporation process10.1149/1.2208011 ↗
52. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
53. Temperature dependence of VOC in CdTe and Cu(InGa)(SeS)2-based solar cells
54. Determination of the band gap depth profile of the penternary Cu(In1-XGaX)(SYSe1-Y)2 chalcopyrite from its composition gradient10.1063/1.1786340 ↗
55. Scanning tunneling spectroscopy and Kelvin probe force microscopy investigation of Fermi energy level pinning mechanism on InAs and InGaAs clean surfaces10.1063/1.3462440 ↗
56. Establishment of a primary reference solar cell calibration technique in Korea: methods, results and comparison with WPVS qualified laboratories10.1088/0026-1394/51/3/139 ↗