Multi-physics modeling and simulation of heat and electrical yield generation in photovoltaics
Source abstract
Abstract
Abstract Photovoltaic (PV) cells convert only a small part of solar energy into electricity. The rest of solar energy is dissipated into heat leading to an increase of PV cells temperature. It is well established that temperature increase negatively affects the electrical yield of the cells. As PV panels are constituted of several PV cells which are mounted in series or parallel, the PV panels’ efficiency is therefore damaged by the increase of temperature. To study the coupled electrical yield and thermal behavior of PV panels, multi-physics models were developed. The models generally combine an electrical model with a thermal one. However, the photons wavelength effects are not accounted for in most of the models proposed in the literature. To account for this, we propose to use the Markov chain process for building an optical model. Therefore, the proposed multi-physics approach was developed by coupling three models: optical, electrical and thermal models. This proposed multi-physics approach was numerically implemented in the MATLAB software. The model was next applied to commercial silicon PV panels to predict their electrical and thermal behavior under Normal Operating Conditions Temperature (NOCT) conditions. The predicted results are compared to the manufacturer data sheets to validate the model. Finally, The thermal and electrical behaviors were also predicted under different irradiance levels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems · Solar Radiation and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. On the temperature dependence of photovoltaic module electrical performance: a review of efficiency/power correlations10.1016/j.solener.2008.10.008 ↗
2. Cost studies on terrestrial photovoltaic power systems with sunlight concentration10.1016/0038-092X(77)90068-8 ↗
3. Calculation of the polycrystalline PV module temperature using a simple method of energy balance10.1016/j.renene.2005.03.010 ↗
4. Modelling of a double-glass photovoltaic module using finite differences10.1016/j.applthermaleng.2005.02.008 ↗
5. A thermal model for photovoltaic panels under varying atmospheric conditions10.1016/j.applthermaleng.2010.03.012 ↗
6. A thermal model for photovoltaic systems10.1016/S0038-092X(00)00149-3 ↗
7. Photovoltaic solar panels simulation including dynamical thermal effects10.1016/0038-092X(82)90210-9 ↗
8. G.M. Tina, S. Scrofani, Electrical and thermal model for PV module temperature evaluation, in: Proceedings of the MELECON 2008 – The 14th IEEE Mediterranean Electrotechnical Conference, 2008, pp. 585–590.10.1109/MELCON.2008.4618498 ↗
9. Three-dimensional thermal modeling of a photovoltaic module under varying conditions10.1016/j.solener.2012.05.034 ↗
10. A computational analysis of coupled thermal and electrical behavior of PV panels
11. Modeling of coupled spectral radiation, thermal and carrier transport in a silicon photovoltaic cell10.1016/j.ijheatmasstransfer.2006.05.014 ↗
12. Impact of radiative-heat transfer on photovoltaic module temperature: impact of radiative-heat transfer on photovoltaic module temperature10.1002/pip.2633 ↗
13. Development and experimental validation of a comprehensive thermoelectric dynamic model of photovoltaic modules10.1016/j.solener.2017.01.045 ↗
14. Thermoelectrical modeling of wavelength effects on photovoltaic module performance; Part II: parameterization10.1109/JPHOTOV.2013.2261117 ↗
15. Finite element thermal analysis of a solar photovoltaic module10.1016/j.egypro.2012.02.050 ↗
16. A simple, solar spectral model for direct-normal and diffuse horizontal irradiance10.1016/0038-092X(84)90260-3 ↗
17. Complete PV model considering its thermal dynamics10.1080/02533839.2012.747044 ↗
18. PV panel single and double diode models: optimization of the parameters and temperature dependence
19. Schubert · 2006
20. Conférences — MMB – Matériaux Multi échelles et Biomécanique. [Online]. Available: 〈http://icube-mmb.unistra.fr/index.php/Conference%C3%A9rences〉. (Accessed 24 March 2017).
21. Solar cell fill factors: general graph and empirical expressions10.1016/0038-1101(81)90062-9 ↗
22. Optimized antireflection coatings for high-efficiency silicon solar cells10.1109/16.119035 ↗
23. Internal quantum efficiency for solar cells10.1016/j.solener.2007.07.010 ↗
24. Miseenpage1-130430_voltec_solar_datasheet_tarka_fr2.pdf. [Online]. Available: 〈http://www.kogybox.com/uploads/assets/voltec_solar/130430_voltec_solar_datasheet_tarka_fr2.pdf〉. (Accessed 05 April 2017).
25. MicrosoftWord-6802.0036BP350J_C01_10.doc-BP-350J.pdf. [Online]. Available: 〈https://www.solarelectricsupply.com/media/custom/upload/BP-350J.pdf〉. (Accessed 05 April 2017).
26. BP585-BPSolar85w.pdf. [Online]. Available: 〈http://www.electricsystems.co.nz/documents/BPSolar85w.pdf〉. (Accessed 05 April 2017).
27. PV Lighthouse. [Online]. Available: https://www.pvlighthouse.com.au/. (Accessed 05 April 2017).
28. D.A. Clugston, P.A. Basore, PC1D version 5: 32-bit solar cell modeling on personal computers, in: Proceedings of the Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference – 1997, 1997, pp. 207–210.
29. Electron and hole mobilities in silicon as a function of concentration and temperature10.1109/T-ED.1982.20698 ↗
30. Hull · 1999
31. 1-OpticalCoatingandMaterials.pdf. [Online]. Available: 〈https://www.cvilaseroptics.com/file/general/1-Optical%20Coating%20and%20Materials.pdf〉. (Accessed 07 April 2017).