Hydrophobic hole-transporting layer induced porous PbI2 film for stable and efficient perovskite solar cells in 50% humidity
Source abstract
Abstract
Abstract Stable and efficient planar perovskite solar cells have been demonstrated in a high relative humidity of 50% with a lead phthalocyanine (PbPc) hole-transporting layer (HTL). Porous PbI 2 film is prepared on the PbPc HTL due to it hydrophobic property, which leads to a fast formation of a compact and homogeneous perovskite film with large grains. As a result, a power conversion efficiency (PCE) of 10.79% is obtained, which is comparable to the reference device with a traditional poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) HTL and one of the highest values among the reported perovskite solar cells prepared in a high humidity condition. More importantly, the device retains 45% of its maximum PCE after it is stored in high humidity condition in dark for 56 days, comparing to an almost full failure of the reference device after only 6 days. This improvement is attributed to the restricted absorption of moisture during device fabrication and storage processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
3. Electron-hole diffusion lengths exceeding 1µm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
4. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
5. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
6. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
7. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
8. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
9. 15.76% efficiency perovskite solar cells prepared under high relative humidity: importance of PbI2 morphology in two-step deposition of CH3NH3PbI310.1039/C5TA00658A ↗
10. Moisture assisted perovskite film growth for high performance solar cells10.1063/1.4901510 ↗
11. A simple approach for the fabrication of perovskite solar cells in air10.1016/j.jpowsour.2015.08.010 ↗
12. Influence of air annealing on high efficiency planar structure perovskite solar cells10.1021/cm5041997 ↗
13. The importance of moisture in hybrid lead halide perovskite thin film fabrication10.1021/acsnano.5b03626 ↗
14. Study of perovskite solar cells synthesized under ambient conditions and of the performance of small cell modules10.1016/j.solmat.2014.11.034 ↗
15. Degradation mechanisms of solution-processed planar perovskite solar cells: thermally stimulated current measurement for analysis of carrier traps10.1002/adma.201502610 ↗
16. Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition10.1039/C4EE01624F ↗
17. Improved light absorption and charge transport for perovskite solar cells with rough interfaces by sequential deposition10.1039/C4NR01141D ↗
18. A two-layer structured PbI2 thin film for efficient planar perovskite solar cells10.1039/C5NR03511B ↗
19. Controlled growth of PbI2 nanoplates for rapid preparation of CH3NH3PbI3 in planar perovskite solar cells10.1002/pssa.201532442 ↗
20. Three-step sequential solution deposition of PbI2-free CH3NH3PbI3 perovskite10.1039/C4TA05384B ↗
21. A smooth CH3NH3PbI3 film via a new approach for forming the PbI2 nanostructure together with strategically high CH3NH3I concentration for high efficient planar-heterojunction solar cells10.1002/aenm.201501354 ↗
22. A facile way to prepare nanoporous PbI2 films and their application in fast conversion to CH3NH3PbI310.1039/C5RA21250B ↗
23. Tailoring mixed-halide, wide-gap perovskites via multistep conversion process10.1021/acsami.6b01246 ↗
24. Intercalation crystallization of phase-pure α-HC(NH2)2PbI3 upon microstructurally engineered PbI2 thin films for planar perovskite solar cells10.1039/C5NR06189J ↗
25. CH3NH3PbI3/perovskite fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
26. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
27. Ionic reactivity at contacts and aging of methylammonium lead triiodide perovskite solar cells10.1002/aenm.201502246 ↗
28. Highly efficient and stabel planar perovskite solar cells with reduced graphen oxide nanosheets as electrode interlayer10.1016/j.nanoen.2014.12.022 ↗
29. Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers10.1039/C5EE02194D ↗
30. Efficient fully-vacuum-processed perovskite solar cells using copper phthalocyanine as hole selective layers10.1039/C5TA07829F ↗
31. Perovskite solar cell with low cost Cu-phthalocyanine as hole transporting material10.1039/C4RA14321C ↗
32. Effective electron blocking of CuPc-doped Spiro-OMeTAD for highly efficient inorganic-organic hybrid perovskite solar cells10.1002/aenm.201501320 ↗
33. Boosting the efficiency and the stability of low cost perovskite solar cells by using CuPc nanorods as hole transport material and carbon as counter electrode10.1016/j.nanoen.2015.11.034 ↗
34. Subphthalocyanine as hole transporting material for perovskite solar cells10.1039/C5RA12004G ↗
35. Structural evolution of evaporated lead phthalocyanine thin films for near-infrared sensitive solar cells10.1021/cm102329v ↗
36. CuI interlayers in lead phthalocyanine thin films enhance near-infrared light absorption10.1063/1.4730604 ↗
37. Efficient organic near-infrared photodetectors based on lead phthalocyanine/C60 heterojunction10.1016/j.orgel.2014.07.008 ↗
38. High-performance organic small-molecule panchromatic photodetectors10.1021/am5074479 ↗
39. Organic solar cells with remarkable enhanced efficiency by using a CuI nuffer to control the molecular orientation and modify the anode10.1063/1.3483159 ↗
40. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
41. Efficient and stable planar heterojunction perovskite solar cells with an MoO3/PEDOT:PSS hole transporting layer10.1039/C5NR01864A ↗
42. Carbon nanotube/polymer composites as a highly stable hole collection layer in perovskite solar cells10.1021/nl501982b ↗
43. Interface energetics in organo-metal halide perovskite-based photovoltaic cells10.1039/c4ee00168k ↗
44. Energy level offset at lead halide perovskite organic hybrid interfaces and their impacts on charge separation10.1002/admi.201400528 ↗
45. MoO3/CuI hybrid buffer layer for the optimization of organic solar cells based on a donor-acceptor triphenylamine10.1016/j.solmat.2012.12.003 ↗
46. Organic photovoltaic cells with near infrared absorption spectrum10.1063/1.2824836 ↗
47. Substrate-controlled band positions in CH3NH3PbI3 perovskite films10.1039/C4CP03533J ↗
48. Transformation of the excited state and photovoltaic efficiency of CH3NH3PbI3 perovskite upon controlled exposure to humidified air10.1021/ja511132a ↗
49. Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells10.1039/C3TA13606J ↗
50. Investigation of the interaction between perovskite films with moisture via in situ electrical resistance measurement10.1021/acsami.5b06268 ↗
51. Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ technique10.1021/nn506864k ↗
52. Atomistic origins of high-performance in hybrid halide perovskite solar cells10.1021/nl500390f ↗
53. Beyond efficiency: the challenge of stability in mesoscopic perovskite solar cells10.1002/aenm.201501066 ↗
54. Temperature- and component-dependent degradation of perovskite photovoltaic materials under concentrated sunlight10.1021/jz502642b ↗
55. Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes10.1002/admi.201500195 ↗