journal article·2011-08Open access

Effect of debris on the silicon wafering for solar cells

A. Bidiville, I. Neulist, K. Wasmer, C. Ballif

Abstract

The wafers used by the photovoltaic industry are mostly produced by multi-wire slurry sawing. One of the key factors determining the wafer quality (presence of saw marks and chips, increased roughness, wafer thickness variations and wafer strength) is the abrasive slurry. For cost reduction, the slurry is regularly exchanged and the debris it contains is removed in a recycling operation. To optimise the slurry usage, it is of utmost importance to understand the effects of the silicon debris concentration in the slurry. This was studied by sawing several bricks one after the other with the same slurry. It was found that when the amount of debris is too high (more than 4% of the slurry volume), saw marks appear on the wafers and they become more fragile. Finally, a first qualitative model explaining the apparition of the saw marks and the reduction of wafer strength is proposed. (C) 2011 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Advanced Surface Polishing Techniques · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Wafering of silicon crystals10.1002/pssa.200564508 ↗
2. Basic mechanisms and models of multi-wire sawing10.1002/adem.200400578 ↗
3. Meeting current and future wafering challenges
4. Mechanisms of wafer sawing and impact on wafer properties10.1002/pip.972 ↗
5. Elasto-hydrodynamic interaction in free abrasive wafer slicing using a wiresaw: modeling and finite element analysis10.1115/1.555375 ↗
6. A. Bidiville, K. Wasmer, J. Michler, C. Ballif, M. Van der Meer, P.M. Nasch, Towards the correlation of mechanical properties and sawing parameters of silicon wafers, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, 2007.
7. B. Weber, C. Bierwisch, R. Kübler, G. Kleer, Investigation on the sawing of solar silicon by application of wires of 100μm diameter, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, 2008.
8. A. Bidiville, K. Wasmer, J. Michler, C. Ballif, M. Van der Meer, P.M. Nasch, Influence of abrasive concentration on the quality of wire-sawn silicon wafers, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, 2008.
9. ISO 4287 · 1997
10. A. Bidiville, Wafer Sawing Processes: From Microscopic Phenomena To Macroscopic Properties, Ph.D. Thesis, Université de Neuchâtel, Neuchâtel (Switzerland), 2010.
11. Three-body abrasion of brittle materials as studied by lapping10.1016/0043-1648(93)90267-P ↗