Photovoltaic properties of poly(benzothiadiazole-thiophene-co-bithiophene) as donor in polymer solar cells
Source abstract
Abstract
Abstract We report the photovoltaic properties of a D–A copolymer, poly(benzothiadiazole-thiophene-co-bithiophene) (PBTTbT), containing the donor (D) unit of oligothiophene with a hexyl side chain and the acceptor (A) unit of 2,1,3-benzothiadiazole (BT) with a methyl side chain. The geometry, electronic and absorption spectroscopic properties of bithiophene-benzothiadiazole-thiophene monomer (M1) of the polymer were investigated theoretically by the density functional theory (DFT) method for deep understanding the relationship of the structure and properties of the polymer. Polymer solar cells (PSCs) were fabricated with PBTTbT as an electron donor blended with [6,6]-phenyl-C71-butyric acid methyl ester (PC 70 BM) as an electron acceptor. The power conversion efficiency (PCE) of PSC is 0.87% for an optimized PBTTbT:PC 70 BM weight ratio of 1:3, under the illumination of AM 1.5, 100 mW/cm 2 . With the additive of 1% 1,8-dioctanedithiol and thermal annealing at 130 °C for 15 min, the PCE of the device was improved to 1.98%. The efficiency improvement of the device was ascribed to a better morphology of the PBTTbT:PC 70 BM active layer with the additive and thermal annealing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
2. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
3. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
4. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
5. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
6. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
7. Indene-C60 bisadduct: a new acceptor for high performance polymer solar cells10.1021/ja908602j ↗
8. 6.5% Efficiency of the polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗
9. High yield synthesis, electrochemical and photovoltaic properties of indene-C70 bisadduct10.1002/adfm.201001122 ↗
10. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
11. A strong antireflective solar cell prepared by tapering silicon nanowires10.1364/OE.18.00A286 ↗
12. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
13. Upscaling of polymer solar cell fabricating using full roll-to-roll processing10.1039/b9nr00430k ↗
14. Production integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
15. Thermal stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
16. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
17. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
18. A thieno[3,4-c]pyrrole-4,6-dione-based copolymer for efficient solar cells10.1021/ja101888b ↗
19. Narrow-bandgap diketo-pyrrolo-pyrrole polymer solar cells: the effect of processing on the performance10.1002/adma.200800456 ↗
20. Synthesis and photovoltaic properties of diketopyrrolopyrrole-based donor–acceptor copolymers10.1021/cm901487f ↗
21. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
22. Low band gap dithieno[3,2-b:2′,3′-d]silole-containing polymers, synthesis, characterization and photovoltaic application10.1039/b910443g ↗
23. High-performance polymer heterojunction solar cells of a polysilafluorene derivative10.1063/1.2836266 ↗
24. A planar copolymer for high efficiency polymer solar cells10.1021/ja9057986 ↗
25. Toward a rational design of poly(2,7-Carbazole) derivatives for solar cells10.1021/ja0771989 ↗
26. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
27. Low-bandgap poly(thiophene-phenylene-thiophene) derivatives with broaden absorption spectra for use in high-performance bulk-heterojunction polymer solar cells10.1021/ja801877k ↗
28. A new donor–acceptor–donor polyfluorene copolymer with balanced electron and hole mobility10.1002/adfm.200700441 ↗
29. Synthesis and photovoltaic properties of a novel low band gap polymer based on N-substituted dithieno[3,2-b:2′,3′-d]pyrrole10.1021/ma802052w ↗
30. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
31. Solvent-vapor treatment induced performance enhancement of poly(3-hexylthiophene): methanofullerene bulk-heterojunction photovoltaic cells10.1063/1.2434173 ↗
32. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
33. Microwave annealing of polymer photovoltaic devices10.1002/adma.200700741 ↗
34. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
35. High-efficiency polymer photovoltaic devices from regioregular-poly(3-hexylthiophene-2,5-diyl) and [6,6]-phenyl-C61-butyric acid methyl ester processed with oleic acid surfactant
36. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
37. Three-dimensional nanoscale organization of highly efficient low band-gap conjugated polymer bulk heterojunction solar cells10.1021/jp809650p ↗
38. Low bandgap polymers by copolymerization of thiophene with benzothiadiazole10.1002/marc.200800507 ↗
39. Accurate spin-dependent electron liquid correlation energies for local spin density calculations: a critical analysis10.1139/p80-159 ↗
40. Density-functional thermochemistry. 3. The role of exact exchange10.1063/1.464913 ↗
41. Density-functional exchange-energy approximation with correct asymptotic behavior10.1103/PhysRevA.38.3098 ↗
42. Development of the Colle–Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
43. One-pot synthesis of 2,5-diethynyl-3,4-dibutylthiophene substituted multitopic bipyridine ligands: redox and photophysical properties of their ruthenium(II) complexes10.1039/b210279j ↗
44. Oligomeric ligands incorporating multiple 5,5 ′-diethynyl-2,2′-bipyridine moieties bridged and end-capped by 3,4-dibutylthiophene units10.1021/jo048435i ↗
45. EXAFS and density functional study of gold(I) thiosulfate complex in aqueous solution10.1021/jp021403j ↗
46. Ab initio study on luminescence and aurophilicity of a dinuclear [(AuPH3)(2)(i-nmt)] complex (i-mnt=isomer-malononitriledithiolate)10.1002/ejic.200300389 ↗
47. Molecular design, syntheses, and physical properties of nonpolymeric amorphous dyes for electron transport10.1021/jp963233e ↗
48. Molecular excitation energies to high-lying bound states from time-dependent density-functional response theory: characterization and correction of the time-dependent local density approximation ionization threshold10.1063/1.475855 ↗
49. An efficient implementation of time-dependent density-functional theory for the calculation of excitation energies of large molecules10.1063/1.477483 ↗
50. Time-dependent density functional theory calculations of photoabsorption spectra in the vacuum ultraviolet region10.1021/jp003937v ↗
51. New developments in the polarizable continuum model for quantum mechanical and classical calculations on molecules in solution10.1063/1.1480445 ↗
52. A new definition of cavities for the computation of solvation free energies by the polarizable continuum model10.1063/1.474671 ↗
53. Frisch · 2004
54. Theoretical studies on the electronic structures and optical properties of the oligomers involving bipyridyl, thiophenyl and ethynyl groups10.1016/j.polymer.2006.11.029 ↗
55. The electronic structure and optical properties of carbazole-based conjugated oligomers and polymers: a theoretical investigation10.1016/j.polymer.2005.12.065 ↗
56. Solution-processable multi-armed organic molecules containing triphenylamine and DCM moieties: synthesis and photovoltaic properties10.1021/jp809795p ↗
57. Solution-processible bipolar triphenylamine-benzimidazole derivatives for highly efficient single-layer organic light-emitting diodes10.1021/cm7035458 ↗
58. Origin of the reduced fill factor and photocurrent in MDMO-PPV:PCNEPV all-polymer solar cells10.1002/adfm.200601110 ↗
59. Electrical characteristics and efficiency of single-layer organic light-emitting diodes10.1103/PhysRevB.58.R13411 ↗
60. Electron transport in a methanofullerene10.1002/adfm.200390004 ↗
61. Toward high-performance polymer solar cells: the importance of morphology control10.1021/ma0618732 ↗