journal article·2017-08

Hydrazine solution processed CuSbSe2: Temperature dependent phase and crystal orientation evolution

Bo Yang, Chong Wang, Zhenkun Yuan, Shiyou Chen, Yisu He, Huaibing Song, Ruiqing Ding, Yang Zhao, Jiang Tang

Publisher page

Abstract

Abstract CuSbSe 2 has attracted huge attention as an absorber material for thin-film solar cells due to its attractive optical and electrical properties, as well as earth-abundant, low-cost, and low-toxic constituent elements. However, different from the conventional inorganic absorbers such as CdTe, CuSbSe 2 has a complicated phase space with at least five competitive phases such as Cu 2 Se, CuSe, Sb 2 Se 3 , Cu 3 SbSe 4 , and Cu 3 SbSe 3 and crystallizes in two-dimension (2D) layered structure. Crystal phase and orientation strongly correlate with film properties and thus are crucial for device performance. In this paper, by varying the annealing temperature, we carefully investigated the phase, electrical properties and crystal orientation evolutions of hydrazine solution processed CuSbSe 2 films. Intermediate Cu 3 SbSe 3 secondary phase was identified, and the temperature dependent orientation change was observed, which is driven by the reduced surface energy, as supported by the first-principle calculations. Finally, a prototype thin film solar cell is fabricated, achieving 2.70% efficiency. Our theoretical calculation and experimental investigation demonstrated the importance of controlling phase composition and crystal orientation in the application for photovoltaics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil10.1038/ncomms3306 ↗
2. Corrigendum: CdTe solar cells with open-circuit voltage breaking the 1V barrier10.1038/nenergy.2016.15 ↗
3. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
4. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
5. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
6. 3.88% efficient tin sulfide solar cells using congruent thermal evaporation10.1002/adma.201402219 ↗
7. Co-optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells10.1002/pip.2504 ↗
8. Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth10.1016/j.solmat.2016.07.050 ↗
9. Efficient Sb2S3-sensitized solar cells via single-step deposition of Sb2S3 using S/Sb-ratio-controlled SbCl3-Thiourea complex solution10.1002/adfm.201500296 ↗
10. Accelerated development of CuSbS2 thin film photovoltaic device prototypes10.1002/pip.2735 ↗
11. Self-regulated growth and tunable properties of CuSbS2 solar absorbers10.1016/j.solmat.2014.09.041 ↗
12. Effects of thermochemical treatment on CuSbS2 photovoltaic absorber quality and solar cell reproducibility
13. Thin film solar cell based on CuSbS2 absorber fabricated from an electrochemically deposited metal stack10.1016/j.tsf.2013.11.046 ↗
14. CuSbS2 as a promising earth-abundant photovoltaic absorber material: a combined theoretical and experimental study10.1021/cm500516v ↗
15. NREL, http://www.nrel.gov/ncpv/images/efficiency chart.jpg, 2016.
16. Wikipedia, http://en.wikipedia.org/wiki/Abundances of the elements (data page), 2016.
17. Wikipedia, https://en.wikipedia.org/wiki/Metal toxicity, 2016.
18. Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells10.1039/C3TA13606J ↗
19. Zhou · Nat. Photon. · 2015 · 9 · 40910.1038/nphoton.2015.78 ↗
20. Solution-processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
21. Thermal evaporation and characterization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells10.1021/am502427s ↗
22. Selenization of Sb2Se3 absorber layer: an efficient step to improve device performance of CdS/Sb2Se3 solar cells10.1063/1.4894170 ↗
23. Improving the performance of Sb2Se3 thin film solar cells over 4% by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗
24. CuSbSe2 photovoltaic devices with 3% efficiency10.7567/APEX.8.082301 ↗
25. CuSbSe2 as a potential photovoltaic absorber material: studies from theory to experiment10.1002/aenm.201501203 ↗
26. One-step electrodeposition and annealing of CuSbSe210.1149/2.007202esl ↗
27. Formation of CuSbS2 and CuSbSe2 thin films via chalcogenisation of Sb–Cu metal precursors10.1016/j.tsf.2011.01.140 ↗
28. Cu4RbCl3I2 solid superionic conductor in thermodynamic study of three-component copper chalcogenides10.1134/S1023193509040089 ↗
29. Synthesis of MoS2 and MoSe2 films with vertically aligned layers10.1021/nl400258t ↗
30. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cells
31. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. Phase diagram and properties of Cu3SbSe4 and other A3IBVC4VI compounds10.1016/0025-5408(73)90164-5 ↗
34. Phase relations of the Cu2S-Sb2S3 system
35. Thermodynamics and Phase Equilibria in the (Ni, Cu, Zn)-(As, Sb, Bi)-S Systems at Elevated Temperature (300–900°C)
36. Grain growth in thin films10.1146/annurev.ms.20.080190.001333 ↗
37. Effects of growth process on the optical and electrical properties in Al-doped ZnO thin films10.1063/1.4866997 ↗
38. CuSbSe2-assisted sintering of CuInSe2 at low temperature10.1007/s10853-012-6385-3 ↗