Degradation of transparent conductive oxides: Interfacial engineering and mechanistic insights
Source abstract
Abstract
Abstract Transparent conductive oxides (TCOs) are a known failure mode in a variety of thin film photovoltaic (PV) devices, through mechanisms such as resistivity increase and delamination. Degradation science studies of these materials, as well as most PV systems, have primarily utilized industry standard qualification protocols, which are not designed to be used as lifetime prediction tests. This work applies a data science approach to this engineering challenge, utilizing commercially available TCOs and subjecting them to an array of stressors, including environmental and material stressors. Optical, electrical and surface sensitive TCO property metrics were monitored and analyzed en mass. Different degradation mechanisms and modes were observed when different stressor combinations were applied; TCO surfaces are sensitive to the proportion of water and light in an exposure, yellowing of the TCO only occurs when humidity and UV light are combined, and PEDOT:PSS (poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate)) application results in hazing and roughening of aluminum-doped zinc oxide (AZO). Using multi-variate analytics and plotting critical material properties against one another in a mechanistic plot, trade-offs between properties and the activation of different degradation mechanisms become readily apparent. In addition to a survey of failure modes of TCOs, a possible solution to the degradation of AZO was examined: the application of an organofunctional silane layer. The application of a thin APTES (3-aminopropyltriethoxysilane) film nearly eliminated the observed edge effects and greatly reduced the resistivity increase caused by damp heat exposure of AZO.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Organic Electronics and Photovoltaics · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. The critical choice of PEDOT:PSS additives for long term stability of roll-to-roll processed OPVs10.1002/aenm.201401912 ↗
2. A roll-to-roll process to flexible polymer solar cells10.1039/b823001c ↗
3. Improved thermal oxidation stability of solution-processable silver nanowire transparent electrode by reduced graphene oxide10.1021/am301913w ↗
4. Highly robust indium-free transparent conductive electrodes based on composites of silver nanowires and conductive metal oxides10.1002/adfm.201303108 ↗
5. Accelerated testing and failure of thin-film PV modules10.1002/pip.526 ↗
6. F.J. Pern, R. Noufi, B. To, C. DeHart, X. Li, S.H. Glick, Degradation of ZnO-based window layers for thin-film CIGS by accelerated stress exposures, Proc. SPIE 7048, Reliability of Photovoltaic Cells, Modules, Components, and Systems, San Diego, 2008, pp. 70480P–70480P-14. http://dx.doi.org/10.1117/12.795097. URL 〈http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=793618〉.10.1117/12.795097 ↗
7. R. Feist, S. Rozeveld, B. Kern, J. D'Archangel, S. Yeung, M. Bernius, Further investigation of the lifetime-limiting failure mechanisms of CIGSS-based minimodules under environmental stress, in: 2009 34th IEEE Photovoltaic Specialists Conference (PVSC), 2009, pp. 002359–002363. URL 〈http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5411323〉.10.1109/PVSC.2009.5411323 ↗
8. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
9. C.R. Osterwald, T.J. McMahon, J.A. del Cueto, J. Adelstein, J. Pruett, Accelerated stress testing of thin-film modules with SnO2: f transparent conductors, in: National Center for Photovoltaics and Solar Program Review Meeting Denver, Colorado March, 2003, pp. 24–26. URL 〈http://www.nrel.gov/docs/fy03osti/33567.pdf〉.
10. K.W. Jansen, A. Varvar, E. Twesme, T. Berens, N.G. Dhere, Design of high-reliability low-cost amorphous silicon modules for high energy yield, in: Solar Energy+Applications, 2008, p. 70480M. URL 〈http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=1338222〉.10.1117/12.795143 ↗
11. Transparent conducting oxide films for thin film silicon photovoltaics10.1016/j.tsf.2007.08.110 ↗
12. R. Sundaramoorthy, F.J. Pern, C. DeHart, T. Gennett, F.Y. Meng, M. Contreras, T. Gessert, Stability of TCO window layers for thin-film CIGS solar cells upon damp heat exposures: part II, in: SPIE Solar Energy+Technology, 2009, 74120J-1−74120J-12. URL 〈http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=1340457〉.10.1117/12.826604 ↗
13. M.D. Kempe, K.M. Terwilliger, D. Tarrant, Stress induced degradation modes in cigs mini-modules, in: 33rd IEEE Photovoltaic Specialists Conference, San Diego, 2008, IEEE, pp. 1–6.10.1109/PVSC.2008.4922497 ↗
14. Blocking reactions between indium-tin oxide and poly (3,4-ethylene dioxythiophene):poly(styrene sulphonate) with a self-assembly monolayer10.1063/1.1469220 ↗
15. Stability of the interface between indium-tin-oxide and poly (3, 4-ethylenedioxythiophene)/poly (styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
16. Role of ITO and PEDOT: PSS in stability/degradation of polymer:fullerene bulk heterojunctions solar cells10.1016/j.solmat.2009.10.026 ↗
17. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
18. Oxide contacts in organic photovoltaics10.1021/ar900096f ↗
19. Designed bithiophene-based interfacial layer for high-efficiency bulk-heterojunction organic photovoltaic cells. importance of interfacial energy level matching10.1021/am900634a ↗
20. A study of degradation of indium tin oxide thin films on glass for display applications10.1016/j.mee.2012.08.002 ↗
21. F.J. Pern, R. Noufi, B. To, C. DeHart, X. Li, S.H. Glick, Degradation of ZnO-based window layers for thin-film CIGS by accelerated stress exposures, Solar Energy+Applications, International Society for Optics and Photonics, 2008, p. 70480P, 10.1117/12.795097.10.1117/12.795097 ↗
22. Damp heat stability of Al-doped zinc oxide films on smooth and rough substrates10.1016/j.tsf.2011.04.190 ↗
23. Damp heat stability and annealing behavior of aluminum doped zinc oxide films prepared by magnetron sputtering10.1016/j.tsf.2005.12.130 ↗
24. Brumbach · 2007
25. Systematic investigation of organic photovoltaic cell charge injection/performance modulation by dipolar organosilane interfacial layers10.1021/am4030609 ↗
26. Degradation of transparent conductive oxides, and the beneficial role of interfacial layers10.1557/opl.2013.695 ↗
27. H.M. Lemire, K.A. Peterson, S. Sprawls, K. Singer, I.T. Martin, R.H. French, Degradation of transparent conductive oxides: mechanistic insights across configurations and exposures, in: SPIE Solar Energy+Technology, International Society for Optics and Photonics, San Diego, 2013, p. 882502. http://dx.doi.org/10.1117/12.2024691.10.1117/12.2024691 ↗
28. Surface modification of ZnO using triethoxysilane-based molecules10.1021/la802621n ↗
29. Pathways for the degradation of organic photovoltaic P3HT: PCBM based devices10.1016/j.solmat.2008.01.020 ↗
30. Angle-resolved xps analysis and characterization of monolayer and multilayer silane films for dna coupling to silica10.1021/la304719y ↗
31. X. Guo, T.J. Marks, Plastic solar cells with engineered interfaces, in: SPIE OPTO, International Society for Optics and Photonics, San Diego, 2013, p. 86220K.10.1117/12.2013491 ↗
32. C.-K. Chien, Application of silane-enhanced adhesion promoters for optical fibers and fiber ribbons, US Patent 6,577,802, June 10, 2003.
33. Methods for improving the performance of silane coupling agents10.1163/156856191X00242 ↗
34. Photodegradation in a stress and response framework: poly(methyl methacrylate) for solar mirrors and lens10.1117/1.JPE.2.022004 ↗
35. L.S. Bruckman, N.R. Wheeler, J. Ma, E. Wang, C.K. Wang, I. Chou, J. Sun, R.H. French. Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science. IEEE Access 1 (2013): 384-403. 10.1109/ACCESS.2013.2267611.10.1109/ACCESS.2013.2267611 ↗
36. Hossain, Mohammad Akram, Yifan Xu, Timothy J. Peshek, Liang Ji, Alexis R. Abramson, and Roger H. French. “Microinverter Thermal Performance in the Real-World: Measurements and Modeling.” PLoS ONE 10, no. 7 (July 6, 2015): e0131279. http://dx.doi.org/10.1371/journal.pone.0131279.10.1371/journal.pone.0131279 ↗
37. Degradation science: Mesoscopic evolution and temporal analytics of photovoltaic energy materials10.1016/j.cossms.2014.12.008 ↗
38. L.S. Bruckman, N.R. Wheeler, I.V. Kidd, J. Sun, and R.H. French. Photovoltaic Lifetime & Degradation Science Statistical Pathway Development: Acrylic Degradation. In Reliability of Photovoltaic Cells, Modules, Components, and Systems VI, Vol. 8825. Bellingham: Spie-Int Soc. Optical Engineering, 2013, http://dx.doi.org/10.1117/12.2024717.10.1117/12.2024717 ↗
39. Y. Hu, M.A. Hosain, T. Jain, Y.R. Gunapati, L. Elkin, G. Zhang, R.H. French, Global sunfarm data acquisition network, energy cradle, and time series analysis, in: Energytech, 2013 IEEE, Cleveland, pp. 1–5. http://dx.doi.org/10.1109/EnergyTech.2013.6645317.10.1109/EnergyTech.2013.6645317 ↗
40. M.A. Hossain, T.J. Peshek, Y. Xu, L. Ji, J. Sun, A. Abramson, R.H. French, Thermal performance of microinverters on dual-axis trackers, in: SPIE Solar Energy+Technology, International Society for Optics and Photonics, 2014, p. 91790J. http://dx.doi.org/10.1117/12.2061235.10.1117/12.2061235 ↗
41. L.S. Bruckman, M.P. Murray, S. Richardson, S.A. Brown, M. Schuetz, R. French, Degradation of back surface acrylic mirrors: implications for low concentration and mirror augmented photovoltaics, in: Energytech, 2012 IEEE, Cleveland, pp. 1–4. http://dx.doi.org/10.1109/EnergyTech.2012.6304678.10.1109/EnergyTech.2012.6304678 ↗
42. History of accelerated and qualification testing of terrestrial photovoltaic modules10.1002/pip.861 ↗
43. T.J. McMahon, G.J. Jorgensen, R.L. Hulstrom, D.L. King, M.A. Quintana, Module 30 year life: what does it mean and is it predictable/achievable?, in: Program and Proceedings: NCPV Program Review Meeting 2000, NREL,, pp. 17–18.
44. F. Pern, R. Noufi, X. Li, C. DeHart, B. To, Damp-heat induced degradation of transparent conducting oxides for thin-film solar cells, in: 33rd IEEE Photovoltaic Specialists Conference, PVSC'08 San Diego, 2008, pp. 1–6.10.1109/PVSC.2008.4922491 ↗
45. Boslaugh · 2012
46. Delahoy · 2011
47. The case for open computer programs10.1038/nature10836 ↗
48. Open Data Charter. URL 〈https://www.gov.uk/government/publications/open-data-charter〉, June 2013.
49. J. Andraka, US open access: The Pathway to Innovation. URL 〈http://www.whitehouse.gov/blog/2013/06/20/open-access-pathway-innovation〉, 2013.
50. B. Obama, US OSTP Executive Order—Making Open and Machine Readable the New Default for Government Information | the White House. URL 〈http://www.whitehouse.gov/the-press-office/2013/05/09/executive-order-making-open-and-machine-readable-new-default-government-〉, 2013.
51. R. Cotton, Learning R: A Step-by-Step Function Guide to Data Analysis, O'Reilly Media, Inc., Sebastapool, 2011. URL 〈http://shop.oreilly.com/product/0636920028352.do〉.
52. P.K. Janert, Data Analysis with Open Source Tools: A Hands-on Guide for Programmers and Data Scientists. O'Reilly Media, Inc., Sebastapool, 2010. URL 〈http://shop.oreilly.com/product/9780596802363.do〉.
53. T.R. Project, F.S. Foundation, The R Foundation for Statistical Computing. URL 〈http://www.r-project.org/index.html〉, October 2014.
54. P. Teetor, R Cookbook, O'Reilly Media, Inc., Sebastopol, 2011.
55. Matloff · 2011
56. Teetor · 2011
57. H.M. Lemire, Degradation of transparent conductive oxides: Mechanistic insights and interfacial engineering (Master's thesis), Case Western Reserve University. URL 〈http://rave.ohiolink.edu/etdc/view?acc_num=case1386325661〉, 2014.10.1117/12.2024691 ↗
58. Analysis of ITO cleaning protocol on surface properties and polymer10.1016/j.solmat.2013.05.010 ↗
59. M.P. Murray, Development and optimization of back surface acrylic solar mirrors to assure 25 year lifetime performance (Master's thesis), Case Western Reserve University. URL 〈http://rave.ohiolink.edu/etdc/view?acc_num=case1364987929〉, 2012.
60. Modeling moisture ingress through polyisobutylene-based edge-seals10.1002/pip.2465 ↗
61. Optimization of silica silanization by 3-aminopropyltriethoxysilane10.1021/la061240g ↗
62. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
63. R. Sundaramoorthy, F.J. Pern, G. Teeter, J.V. Li, M. Young, D. Kuciauskas, B. To, F. Yan, S. Johnston, R. Noufi, Influence of damp heat on the electrical, optical, and morphological properties of encapsulated CuInGaSe2 devices, in: Proceedings of 37 IEEE PVSC. URL 〈http://www.nrel.gov/docs/fy11osti/50841.pdf〉.