Tuning thermal properties of latent heat storage material through confinement in porous media: The case of (1-CnH2n+1NH3)2ZnCl4 (n=10 and 12)
Source abstract
Abstract
Abstract In practical use, latent heat storage system always faces a lack of phase change materials (PCMs) that have ideal performance at desirable temperature and high efficiency to treat thermal effects from various outer heat sources. To solve this problem, some new latent heat storage composites were prepared by incorporating those well-performed PCMs in porous materials. In doing this, the layered perovskite-type compounds, (1-C 10 H 21 NH 3 ) 2 ZnCl 4 (C 10 Zn) and (1-C 12 H 25 NH 3 ) 2 ZnCl 4 (C 12 Zn), were embedded in controlled porous glass (CPG), which can acquire size-dependent thermal properties. Heat storage nature, morphology and crystalline structures of the materials were characterized using differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and powder X-ray diffractions (XRD). Under confinement of the porous glass with nominal pore sizes of d =12–300 nm, the porous C n Zn compound gains a regulation window of around 10 °C in relation to the bulk by its solid–solid phase transition. The transition temperature ( T d ), depression of the transition temperature (∆ T trs ), and enthalpy change of the transition (∆ trs H d ) of the confined compound show a linear relation to the reverse pore size. A same stable thermal cycling property is observed in the pore compound as the bulk, which is consistent with similar diffraction patterns among them. The supercooling of the pore form becomes larger than the bulk. The retention of the layered structure and complete crystallization in the pore C n Zn is responsible for its reversible heat storage property.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Thermal stability of phase change materials used in latent heat energy storage systems: a review10.1016/j.rser.2012.10.022 ↗
2. Synthesis and thermal properties of shape stabilized lauric acid/activated carbon composites as phase change materials for thermal energy storage10.1016/j.solmat.2012.03.013 ↗
3. Natural convection in an internally finned phase change material heat sink for the thermal management of photovoltaics10.1016/j.solmat.2011.01.008 ↗
4. Review of thermal energy storage for air conditioning systems10.1016/j.rser.2012.05.030 ↗
5. in situ synthesis and phase change properties of Na2SO4·10H2O@SiO2 solid nanobowls toward smart heat storage10.1021/jp202373b ↗
6. Crystal structures and thermodynamic properties on phase change materials n-CnH2n+1NH3·H2PO4(s) (n=8, 9 and 10)10.1016/j.solmat.2012.02.029 ↗
7. Paraffin wax mixtures as phase change materials10.1016/j.solmat.2010.07.005 ↗
8. Crystal structures and solid–solid phase transitions on phase change materials (n-CnH2n+1NH3)2CuCl4(s) (n=10 and 11)10.1016/j.solmat.2013.02.009 ↗
9. Preparation and characterization of the layered hybrids (CnH2n+1NH3)2FeCl410.1016/j.jpcs.2007.04.008 ↗
10. Synthesis and thermal energy storage characteristics of polystyrene-graft-palmitic acid copolymers as solid–solid phase change materials10.1016/j.solmat.2011.07.003 ↗
11. Form-stable phase change materials for thermal energy storage10.1016/j.rser.2012.01.015 ↗
12. Selection of materials for high temperature latent heat energy storage10.1016/j.solmat.2012.07.020 ↗
13. The effect of crystal size on the thermal energy storage capacity of thickened Glauber׳s salt10.1016/0038-092X(83)90005-1 ↗
14. Preparation and characteristics of microencapsulated palmitic acid with TiO2 shell as shape-stabilized thermal energy storage materials10.1016/j.solmat.2014.01.023 ↗
15. Systematic investigation on shape stability of high-efficiency SEBS/paraffin form-stable phase change materials10.1016/j.solmat.2013.07.035 ↗
16. Subsolidus binary phase diagram of the perovskite type layer materials (n-CnH2n+1NH3)2ZnCl4 (n=10,12, 14)10.1016/j.tca.2011.04.008 ↗
17. Energy storage: applications and challenges10.1016/j.solmat.2013.08.015 ↗
18. Cyclohexane and benzene confined in MCM-41 and SBA-15 confinement effects on freezing and melting10.1021/jp034003k ↗
19. The melting behavior of organic materials confined in porous solids10.1063/1.459240 ↗
20. Effects of confinement on freezing and melting
21. Preparation and characterization of natural lower dimensional layered perovskite-type compounds10.1016/S0022-3697(99)00402-3 ↗
22. Metal-dependent thermal behaviour in (n-CnH2n+1NH3)2MCl410.1016/0040-6031(75)85084-2 ↗
23. Vibrational study of the dynamics of n-decylammonium chains in the perovskite-type layer compound (C10H21NH3)2CdCl410.1021/j150667a031 ↗
24. Crystal structures, lattice potential nergies, and thermochemical properties of crystalline compounds (1-CnH2n+1NH3)2ZnCl4(s) (n=8, 10, 12, and 13)10.1021/ic2012974 ↗
25. Bis(n-dodecylammonium) tetrachlorozincate10.1107/S0567740877004051 ↗
26. Mesoscopic phase behavior of tridecane–tetradecane mixtures confined in porous materials: effects of pore size and pore geometry10.1021/jp4040198 ↗
27. New phase behavior of n-undecane–tridecane mixtures confined in porous materials with pore sizes in a wide mesoscopic range10.1039/c3ra43124j ↗
28. Melting and freezing of water in ordered mesoporous silica materials10.1039/b010086m ↗
29. Freezing of mixtures confined in silica nanopores: experiment and molecular simulation10.1063/1.3464279 ↗
30. Confined crystallization of n-hexadecane located inside microcapsules or outside submicrometer silica nanospheres: a comparision study10.1021/jp4021849 ↗
31. Shape-stabilized phase change materials based on polyethylene glycol/porous carbon composite: the influence of the pore structure of the carbon materials10.1016/j.solmat.2012.05.031 ↗
32. Increasing phase change latent heat of stearic acid via nanocapsule interface confinement10.1021/jp408478h ↗
33. Internal pressure and surface tension of bare and hydrogen coated silicon nanoparticles10.1063/1.1797073 ↗
34. Crystallization in miniemulsion droplets10.1021/jp0262057 ↗
35. Freezing and melting of water confined in silica nanopores10.1002/cphc.200800616 ↗
36. Overheating and undercooling during melting and crystallization of metal nanoparticles10.1016/j.physe.2010.03.014 ↗
37. LSPR study of the kinetics of the liquid–solid phase transition in Sn nanoparticles10.1021/nl100044k ↗