Effects of Damkhöler number of evaporation on the morphology of active layer and the performance of organic heterojunction solar cells fabricated by electrospray method
Source abstract
Abstract
The electrospray (ES) process has emerged as a scalable and efficient fabrication method for organic photovoltaic cells (OPVs). However, the ES process could often involve numerous parameters, which impose a major challenge on uncovering the interplay among process, morphology of active layers, and device performance. This work attempts to reduce the parameter space and capture the essence of the ES process using the Damkholer (Da) number of evaporation, which is the ratio of the droplet residence time over evaporation time. We first derived an explicit equation for Da that links nine different parameters affecting the process. Experimental results indicate that Da number shows strong effect on morphology and crystallinity of the active layer composed of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM). Most remarkably, the power conversion efficiency exhibits monotonically dependence on Da values spanning more than one order of magnitude, e.g., from 0.13 to 1.52. This finding suggests that Da number analysis can reduce the large parameter space in electrospray deposition, thus provides a simple way to control and predict the morphology of active layer and the performance of the solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Electrohydrodynamics and Fluid Dynamics · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
2. High photovoltaic performance of a low-bandgap polymer10.1002/adma.200600160 ↗
3. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
4. Dialkyl-substituted dithienothiophene copolymers as polymer semiconductors for thin-film transistors and bulk heterojunction solar cells10.1021/ma102247x ↗
5. Fullerene bisadducts for enhanced open-circuit voltages and efficiencies in polymer solar cells10.1002/adma.200702438 ↗
6. 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗
7. Indene-C60 bisadduct: a new acceptor for high- performance polymer solar cells10.1021/ja908602j ↗
8. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
9. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
10. Structural order in bulk heterojunction films prepared with solvent additives10.1002/adma.201003690 ↗
11. Interface investigation and engineering-achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
12. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
13. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
14. Spin-coated small molecules for high performance solar cells10.1002/aenm.201100230 ↗
15. Solution-processed organic solar cells10.1557/mrs2008.138 ↗
16. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
17. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
18. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
19. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
20. Polymer based organic solar cells using ink-jet printed active layers
21. Airbrush spray-coating of polymer bulk-heterojunction solar cells10.1016/j.solmat.2011.01.047 ↗
22. Electrospray as a fabrication tool in organic photovoltaics10.1166/rnn.2012.1011 ↗
23. Electrostatic spraying of liquids: main functioning modes10.1016/0304-3886(90)90025-Q ↗
24. Compact multiplexing of monodisperse electrosprays10.1016/j.jaerosci.2009.07.002 ↗
25. Performance optimization of polymer solar cells using electrostatically sprayed photoactive layers10.1002/adfm.201000433 ↗
26. Fabrication of ordered bulk heterojunction organic photovoltaic cells using nanopatterning and electrohydrodynamic spray deposition methods10.1039/c2nr32165c ↗
27. Realization of solution processed multi-layer bulk heterojunction organic solar cells by electro-spray deposition10.1016/j.orgel.2012.06.016 ↗
28. Enhancement of the performance of organic solar cells by electrospray deposition with optimal solvent system10.1016/j.solmat.2013.10.020 ↗
29. Film forming properties of electrosprayed organic heterojunctions
30. Bulk heterojunction organic photovoltaic cell fabricated by the electrospray deposition method using mixed organic solvent,10.1002/pssr.201105232 ↗
31. Morphology controlled bulk-heterojunction layers of fully electro-spray coated organic solar cells10.1016/j.solmat.2012.06.027 ↗
32. Variability of physical characteristics of electro-sprayed poly(3-hexylthiophene) thin films
33. Spray deposition of electrohydrodynamically atomized polymer mixture for active layer fabrication in organic photovoltaics10.1016/j.solmat.2010.04.057 ↗
34. Almería · 2012
35. Fundamentals of cone-jet electrospray
36. Jet break-upin electrohydrodynamic atomization in the cone-jet mode10.1016/S0021-8502(99)00034-8 ↗
37. On the equilibrium of liquid conducting masses charged with electricity10.1080/14786448208628425 ↗
38. Droplet vaporization model for spray combustion calculations10.1016/0017-9310(89)90043-4 ↗
39. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)
40. Simultaneous use of small and wide-angle X-ray techniques to analyze nanometerscale phase separation in polymer heterojunction solar cells10.1002/adma.200703097 ↗
41. Relation between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cells10.1016/j.cplett.2005.11.020 ↗
42. Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
43. Directed self-assembly of hybrid oxide/polymer core/shell nanowires with transport optimized morphology for photovoltaics10.1002/adma.201103708 ↗
44. Continuous equilibrated growth of ordered block copolymer thin films by electrospray deposition10.1021/nn400279a ↗
45. Investigation of the factors affecting the power conversion efficiency of all-solution-processed ‘bilayer’ P3HT:PCBM solar cells10.1016/j.synthmet.2013.02.021 ↗
46. Design, fabrication and characterization of linear multiplexed electrospray atomizers micro-machined from metal and polymers10.1080/02786826.2012.734936 ↗
47. Large area slot-die coated organic solar cells on flexible substrates with non-halogenated solution formulations10.1016/j.solmat.2014.06.017 ↗
48. Effect of solvent on large-area polymer–fullerene solar cells fabricated by a slot-die coating method10.1016/j.solmat.2014.03.042 ↗