journal article·2011-12

ITO-free low-cost organic solar cells with highly conductive poly(3,4 ethylenedioxythiophene): p-toluene sulfonate anodes

Mohammad Arifur Rahman, Abdur Rahim, Md. Maniruzzaman, Kiyeul Yang, Chiyoung Lee, Hoseok Nam, Hoesup Soh, Jaegab Lee

Publisher page

Abstract

Indium tin oxide (ITO)-free organic solar cells were fabricated with highly conductive and transparent tosylate-doped poly(3,4-ethylenedioxythiophene: p-toluene sulfonate) (PEDOT:PTS) anodes of various thicknesses that were prepared by the vapor-phase oxidative polymerization of EDOT using Fe(PTS)3 as an oxidant. Both solution-processable layers – PEDOT:PSS and photoactive P3HT:PCBM – were spin coated. The anodes transmittance and conductivity varied with thickness. Power conversion efficiency was maximized at 1.4%. The ITO-free organic solar cells photovoltaic characteristics are qualitatively compared with those of ITO-based organic solar cells to explore the possibility of replacing costly, vacuum-deposited ITO with highly conductive, patterned polymer films fabricated by inexpensive vapor-phase polymerization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
2. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
3. Photoconductivity of a low-bandgap conjugated polymer10.1002/adfm.200600199 ↗
4. Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate10.1016/j.solmat.2004.02.031 ↗
5. Indium–tin oxide treatments for single- and double-layer polymeric light-emitting diodes: the relation between the anode physical, chemical, and morphological properties and the device performance10.1063/1.368981 ↗
6. Characterization of treated indium–tin-oxide surfaces used in electroluminescent devices10.1063/1.370948 ↗
7. Electrode grids for ITO-free organic photovoltaic devices10.1002/adma.200602561 ↗
8. Solution-processed metal nanowire mesh transparent electrodes10.1021/nl073296g ↗
9. Printable anodes for flexible organic solar cell modules10.1016/j.tsf.2003.11.038 ↗
10. All solution roll-to-roll processed polymer solar cells free from indium–tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
11. Biodegradable polymer solar cells10.1016/j.solmat.2008.02.002 ↗
12. Highly conductive PEDOT/silicate hybrid anode for ITO free polymer solar cells10.1016/j.solmat.2009.11.009 ↗
13. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium–tin–oxide10.1016/j.solmat.2009.04.020 ↗
14. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
15. Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells10.1016/j.solmat.2008.12.013 ↗
16. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
17. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
18. ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
19. Polymer solar cells with poly(3,4-ethylenedioxythiophene) as transparent anode10.1016/j.orgel.2008.07.003 ↗
20. A polymer photodiode using vapour-phase polymerized PEDOT as an anode10.1016/j.solmat.2005.02.005 ↗
21. High-conductivity large-area semi-transparent electrodes for polymer photovoltaics by silk screen printing and vapour-phase deposition10.1016/j.solmat.2005.02.004 ↗
22. Influence of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) in polymer LEDs10.1103/PhysRevB.74.115202 ↗
23. Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene)10.1039/b417803n ↗
24. A polymer photodiode using vapour-phase polymerized PEDOT as an anode10.1016/j.solmat.2005.02.005 ↗
25. Polymer gate dielectrics and conducting-polymer contacts for high-performance organic thin film transistor10.1002/1521-4095(20021203)14:23<1717::AID-ADMA1717>3.0.CO;2-G ↗
26. Application of tosylate-doped poly(3,4 ethylenedioxythiophene) (PEDOT) films into bottom contact pentacene organic thin film transistors (OTFTs)10.1016/j.tsf.2010.03.056 ↗
27. Surface smoothness and conductivity control of vapor-phase polymerized poly(3,4-ethylenedioxythiophene) thin coating for flexible optoelectronic applications10.1016/j.tsf.2007.10.114 ↗
28. Aminosilane SAM-assisted patterning of poly(3,4-ethylenedioxythiophene) nanofilm robustly adhered to SiO2 substrate10.1002/marc.200700272 ↗
29. Photocurrent spectroscopy for the investigation of charge carrier generation and transport mechanisms in organic p/n-junction solar cells10.1016/S0927-0248(00)00018-0 ↗
30. Photocurrent generation in nanostructured organic solar cells10.1021/nn700447t ↗
31. Modified buffer layers for polymer photovoltaic devices10.1063/1.2437703 ↗