journal article·2019-01

Effect of Cu content in CuSbS2 thin films using hybrid inks: Their photovoltaic properties and defect characteristics

Shahara Banu, Yunae Cho, Kihwan Kim, Seung Kyu Ahn, Jun Sik Cho, Jihye Gwak, Ara Cho

Publisher page

Abstract

Abstract CuSbS2 (CAS) thin films were grown with different Cu/Sb precursor ratios using a non-vacuum-based hybrid ink method. The prepared precursor inks were coated on Mo-coated soda lime glass and a subsequent sulfurization process was carried out. X-ray diffraction (XRD) patterns confirmed the presence of the CuSbS2 phase for an optimal Cu/Sb precursor ratio; for other ratios, additional secondary phases were also observed. Then, CuSbS2 solar cells were fabricated to compare the photovoltaic performances. The sample with the pure CuSbS2 phase showed better photovoltaic properties than those films containing secondary phases. The best CuSbS2 solar cell with optimum Cu/Sb ratio exhibited the conversion efficiency of 2.75%. The temperature-dependent light and dark current density–voltage (JV-T) characteristics were measured to investigate the recombination process, and R–J curves were extracted to study the photovoltaic characteristics, including parasitic resistances. The depletion width and carrier concentrations were also compared from capacitance–voltage (C-V) measurements of the solar cells prepared with the films of various Cu/Sb ratios. Using admittance spectroscopy (AS), the dominant defect energy level was deduced and determined as 0.23 eV above the valence band maximum. Drive-level capacitance profiling (DLCP) was applied to characterize the defect behavior of the device with optimum Cu content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
3. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
4. Structural and electronic properties of CuSbS2 and CuBiS2: potential absorber materials for thin-film solar cells10.1039/c2cp40916j ↗
5. Fabrication and characterization of cost-efficient CuSbS2 thin film solar cells using hybrid inks10.1016/j.solmat.2016.02.013 ↗
6. Selective thin film synthesis of copper-antimony-sulfide using hybrid ink10.1016/j.solener.2016.12.048 ↗
7. Iron pyrite thin films deposited via non-vacuum direct coating of iron-salt/ethanol-based precursor solutions10.1039/C4TA03397C ↗
8. Atmospheric-pressure chemical vapor deposition of iron pyrite thin films10.1002/aenm.201200043 ↗
9. CdS/Sb2S3 heterojunction thin film solar cells with thermally-evaporated absorber10.1039/C7TC02460F ↗
10. Overcoming efficiency limitations of SnS-based solar cells10.1002/aenm.201400496 ↗
11. Tin monosulfide (SnS) thin films grown by liquid-phase deposition10.1016/j.solener.2016.12.013 ↗
12. Solution processed single-phase Cu2 SnS3 films: structure and photovoltaic performance10.1039/C7SE00150A ↗
13. CuSbS2 as a promising earth-abundant photovoltaic absorber material: a combined theoretical and experimental study10.1021/cm500516v ↗
14. Self-regulated growth and tunable properties of CuSbS2 solar absorbers10.1016/j.solmat.2014.09.041 ↗
15. Inverse design of high absorption thin-film photovoltaic materials10.1002/aenm.201200538 ↗
16. Characterization of defects in copper antimony disulfide10.1039/C7TA07012H ↗
17. Progress in development of copper antimony sulfide thin films as an alternative material for solar energy harvesting10.1007/s10854-015-3092-2 ↗
18. CuSbSe2 photovoltaic devices with 3% efficiency10.7567/APEX.8.082301 ↗
19. Effects of thermochemical treatment on CuSbS2 photovoltaic absorber quality and solar cell reproducibility10.1021/acs.jpcc.6b04206 ↗
20. Temperature-dependent current-voltage and light soaking measurements on Cu(In,Ga)Se2 solar cells with ALD-Zn1-xMgxO buffer layers10.1002/pip.912 ↗
21. Electronic properties of CuGaSe2 -based heterojunction solar cells. Part I. Transport analysis10.1063/1.371903 ↗
22. Influence of shunt conduction on determining the dominant recombination processes in CIGS thin-film solar cells10.1016/j.cap.2012.06.006 ↗
23. Temperature dependence of solar cell performance - An analysis10.1016/j.solmat.2012.02.019 ↗
24. Bulk and metastable defects in CuIn1-xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
25. Limitation factors for the performance of kesterite Cu2ZnSnS4 thin film solar cells studied by defect characterization10.1039/C5RA00069F ↗
26. The role of sulfur in solution-processed Cu2ZnSn(S,Se)4 and its effect on defect properties10.1002/adfm.201201732 ↗
27. K. Hoon Yoon, Non-vacuum processed CuInSe2 thin films fabricated with a hybrid ink10.1016/j.solmat.2012.10.005 ↗
28. Carbon layer reduction via a hybrid ink of binary nanoparticles in non-vacuum-processed CuInSe2 thin films10.1016/j.solmat.2012.12.013 ↗
29. The growth of Cu2-xSe thin films using nanoparticles10.1016/j.tsf.2013.02.037 ↗
30. A hybrid ink of binary copper sulfide nanoparticles and indium precursor solution for a dense CuInSe2 absorber thin film and its photovoltaic performance10.1039/c2jm32624h ↗
31. A chelating effect in hybrid inks for non-vacuum-processed CuInSe2 thin films10.1039/c3ta15202b ↗
32. Solution-processed CuSbS2 solar cells based on metal-organic molecular solution precursors10.1007/s10853-017-1663-8 ↗
33. CuSbSe2-assisted sintering of CuInSe2 at low temperature10.1007/s10853-012-6385-3 ↗
34. Structural, thermodynamical and optical properties of Cu2-II-IV-VI4 quaternary compounds10.1007/s10853-005-1223-5 ↗
35. Effect of annealing treatment on CdS/CIGS thin film solar cells depending on different CdS deposition temperatures10.1016/j.solmat.2015.05.052 ↗
36. Substrate temperature effect on the optical and electrical properties of antimony trisulfide thin films10.1016/S0040-6090(98)00350-2 ↗
37. Influence of defects on solar cell characteristics10.4028/www.scientific.net/SSP.156-158.1 ↗
38. Investigation of the performance of CIS photovoltaic modules under different environmental conditions10.4236/sgre.2011.24043 ↗
39. Engineering of interface band bending and defects elimination via Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells10.1039/C7EE01405H ↗
40. Identifying parasitic current pathways in CIGS solar cells by modelling dark J-V response10.1002/pip.2582 ↗
41. Pinhole treatment of a CdTe photovoltaic device by electrochemical polymerization technique10.1016/j.solmat.2012.07.025 ↗
42. Actual partial pressure of Se vapor in a closed selenization system: quantitative estimation and impact on solution-processed chalcogenide thin-film solar cells10.1039/C6TA00145A ↗
43. Defects in Cu(In,Ga)Se2 chalcopyrite semiconductors: a comparative study of material properties, defect states, and photovoltaic performance10.1002/aenm.201100344 ↗
44. Effects of the Cu/(Ga+In) ratio on the bulk and interface properties of Cu(InGa)(SSe)2 solar cells10.1016/j.solmat.2016.01.023 ↗
45. Effect of temperature and illumination on the electrical characteristics of polymer-fullerene bulk-heterojunction solar cells10.1002/adfm.200304399 ↗
46. A comprehensive study of hole collection in heterojunction solar cells10.1063/1.4764031 ↗
47. Streetman · 2016
48. Accelerated development of CuSbS2 thin film photovoltaic device prototypes
49. Effects of the compositional ratio distribution with sulfurization temperatures in the absorber layer on the defect and surface electrical characteristics of Cu2ZnSnS4 solar cells10.1002/pip.2619 ↗
50. Distinction between bulk and interface states in CuInSe2/CdS/ZnO by space charge spectroscopy10.1063/1.366686 ↗
51. Distinguishing metastable changes in bulk CIGS defect densities from interface effects10.1016/S0040-6090(03)00189-5 ↗