journal article·2012-10

A computational proof toward correlation between the theoretical chemical concept of electrophilicity index for the acceptors of C60 and C70 fullerene derivatives with the open-circuit voltage of polymer-fullerene solar cells

Maryam Anafcheh, Reza Ghafouri, Nasser L. Hadipour

Publisher page

Abstract

Abstract A quantum chemical computational study has been performed at B3LYP/6-311G(d, p) level to investigate electronic structures of the C60 and C70 fullerene derivatives, as electron acceptor in bulk heterojunction solar cells, seeking ways to improve their efficiency in corresponding photovoltaic devices. The key point of the present survey is to achieve a significant linear correlation between the electrophilicity index calculated for the fullerene derivatives and the corresponding open-circuit voltage of the photovoltaic device. This index is a prominent feature in determining tendency of the fullerene derivative towards acquiring an additional electron from the adjacent electron-rich donor molecule, and also its resistance to give the electron back transfer. The results reveal that replacing butyric acid ester by propionic acid ester in the aliphatic part or increasing the donating strength of the substituent in the esteric part will cause an increase in electrophilicity. Considering the derivatives of C70 generally yields higher electrophilicity than those of C60 derivatives. Also for indene-C60 derivatives a significant increase in the electrophilicity is observed by increasing the number of adducts, leading to raise in the VOC values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Fullerene Chemistry and Applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Skotheim · 2007
3. Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions10.1063/1.359792 ↗
4. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
5. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
6. A brief history of the development of organic and polymeric photovoltaics10.1016/j.solmat.2004.02.021 ↗
7. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
8. Upscaling of polymer solar cell fabricating using full roll-to-roll processing10.1039/b9nr00430k ↗
9. Production integration of compact roll-to roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
10. Preparation and characterization of fulleroid and methanofullerene derivatives10.1021/jo00108a012 ↗
11. Efficient methano [70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
12. Efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
13. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
14. Solvent-vapor treatment induced performance enhancement of poly(3-hexylthiophene): methanofullerene bulk-heterojunction photovoltaic cells10.1063/1.2434173 ↗
15. Controlling morphology in polymer–fullerene mixtures10.1002/adma.200701519 ↗
16. Improving performance of polymer photovoltaic devices using an annealing-free approach via construction of ordered aggregates in solution10.1039/b719945g ↗
17. Methanofullerenes used as electron acceptors in polymer photovoltaic devices10.1021/jp048890i ↗
18. Photovoltaic devices with methanofullerenes as electron acceptors10.1021/jp025973v ↗
19. Thinner-film plastic photovoltaic cells based on different C60 derivatives10.1002/pat.740 ↗
20. Fullerene solubility–current density relationship in polymer solar cells10.1002/pssr.200802199 ↗
21. Self-assembly of thiophene- and furan-appended methanofullerenes with poly(3-hexylthiophene) in organic solar cells10.1002/cssc.200900196 ↗
22. Effect of carbon chain length in the substituent of PCBM-like molecules on their photovoltaic properties10.1002/adfm.200902447 ↗
23. Fullerene bisadducts for enhanced open-circuit voltages and efficiencies in polymer solar cells10.1002/adma.200702438 ↗
24. Functionalized methanofullerenes used as n-type materials in bulk-heterojunction polymer solar cells and in field-effect transistors10.1021/ja710621j ↗
25. [70]fullerene-based materials for organic solar cells10.1002/cssc.201000246 ↗
26. Increasing the open circuit voltage of bulk-heterojunction solar cells by raising the LUMO level of the acceptor10.1021/ol062666p ↗
27. Tuning the LUMO level of the acceptor to increase the open-circuit voltage of polymer-fullerene solar cells: a quantum chemical study10.1016/j.solmat.2008.04.010 ↗
28. Fullerene bisadducts for enhanced open-circuit voltages and efficiencies in polymer solar cells10.1002/adma.200702438 ↗
29. Electron trapping in higher adduct fullerene-based solar cells10.1002/adfm.200900459 ↗
30. Penta(organo) [60]fullerenes as acceptors for organic photovoltaic cells10.1039/b904485j ↗
31. Columnar structure in bulk heterojunction in solution-processable three-layered p–i–n organic photovoltaic devices using tetrabenzoporphyrin precursor and silylmethyl [60]fullerene10.1021/ja9048702 ↗
32. Endohedral fullerenes for organic photovoltaic devices10.1038/nmat2379 ↗
33. J.A. Mikroyannidis, A.N. Kabanakis, S.S. Sharma, G.D. Sharma, A simple and effective modification of PCBM for use as an electron acceptor in efficient bulk heterojunction solar cells, Advanced Functional Materials 21 (2011) 746–75510.1002/adfm.201001807 ↗
34. He · Journal of the American Chemical Society · 2010 · 132 · 137710.1021/ja908602j ↗
35. C.J. Brabec, A. Cravino, D. Meissner, N.S. Sariciftci, T. Fromherz, M.T. RispensL.Sanchez, J.C. Hummelen, Origin of the open circuit voltage of plastic solar cells, Advanced Functional Materials. 11 (2001) 374–380.10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
36. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
37. Material solubility–photovoltaic performance relationship in the design of novel fullerene derivatives for bulk heterojunction solar cells10.1002/adfm.200801189 ↗
38. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
39. Biindene-C60 adducts for the application as acceptor in polymer solar cells with higher open-circuit-voltage10.1016/j.solmat.2010.11.016 ↗
40. Electrophilicity index10.1021/ja983494x ↗
41. Electronegativity: the density functional viewpoint10.1063/1.436185 ↗
42. A link between the ionization energy ratios of an atom and its electronegativity and hardness10.1016/j.cplett.2006.09.062 ↗
43. Density-functional thermochemistry. III. The role of exact exchange10.1063/1.464913 ↗
44. Development of the colle-salvetti correlation energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
45. Frisch · 1998
46. Accuracy of AHn equilibrium geometries by single determinant molecular orbital theory10.1080/00268977400100171 ↗
47. Ab initio theoretical predictions of the equilibrium geometries of C60, C60H60 and C60F6010.1016/0009-2614(91)90231-W ↗
48. The equilibrium geometry of C60 as predicted by second-order (MP2) perturbation theory10.1016/0009-2614(91)80301-D ↗
49. Bond lengths in free molecules of buckminsterfullerene, C60, from gas phase electron diffraction10.1126/science.254.5030.410 ↗
50. Crystal structure of osmylated C60: confirmation of the soccer ball framework10.1126/science.252.5003.312 ↗
51. Higher fullerenes as electron acceptors for polymer solar cells: a quantum chemical study10.1016/j.solmat.2009.06.016 ↗
52. Correlation between oxidation potential and open-circuit voltage of composite solar cells based on blends of polythiophenes/fullerene derivative10.1063/1.1650878 ↗
53. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
54. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
55. Solvation-induced morphology effects on the performance of polymer-based photovoltaic devices10.1002/1616-3028(200112)11:6<420::AID-ADFM420>3.0.CO;2-K ↗
56. Influence of the anodic work function on the performance of organic solar cells10.1002/1439-7641(20020916)3:9<795::AID-CPHC795>3.0.CO;2-A ↗