Study on snail trail formation in PV module through modeling and accelerated aging tests
Source abstract
Abstract
Abstract In recent years, a defect on the surface of photovoltaic (PV) modules called ‘snail trails’ has become a widespread reliability issue, affecting many modules installed in the field. In this work, silver acetate is identified as one component of snail trails through non-destructive Raman analysis. The chemical reaction between the silver grid line, oxygen and acetic acid on top of the micro-crack is proposed as the mechanism. The generation and/or diffusion of acetic acid released from ethylene vinyl acetate (EVA) encapsulant, oxygen and moisture are modeled using finite element method to predict the formation of silver acetate. The simulation results indicate that the existence of micro-crack plus cell gap are necessary for snail trail formation and act as the pathway for transport. As the source of acetic acid, encapsulant plays an important role in snail trail formation. Oxygen transmission rate of backsheet also has significant influence on snail trail formation. Water vapor transmission rate is shown to have no effect on snail trials over a wide rate of transmission rates. An accelerated aging snail trail test has been developed that can simulate snail trails within days, and is compared to modeling and field results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · Electron and X-Ray Spectroscopy Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Xu · 2012
2. Unlocking the secret of snail trails
3. Silver nanoparticles cause snail trails in photovoltaic modules10.1016/j.solmat.2013.11.013 ↗
4. Polymer foil additives trigger the formation of snail trails in photovoltaic modules10.1016/j.solmat.2014.06.028 ↗
5. Microscopy study of snail trail phenomenon on photovoltaic modules10.1039/c2ra22280a ↗
6. Analysis and reproduction of snail trails on silver grid lines in crystalline silicon photovoltaic modules10.1016/j.solener.2015.11.040 ↗
7. I. Duerr, J. Bierbaum, J. Metzger, J. Richter, D. Philipp, H. Wirth, Silver grid finger corrosion on snail track affected PV modules – investigation on degradation products and mechanisms. in: Proceedings of the 6th Metallization Workshop, Konstanz, 2016.10.1016/j.egypro.2016.10.083 ↗
8. Modelling of conditions for accelerated lifetime testing of humidity impact on PV-modules based on monitoring of climatic data10.1016/j.solmat.2011.12.011 ↗
9. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
10. M. Kempe, G. Jorgensen, K. Terwilliger, et al. Ethylene-vinyl acetate potential problems for photovoltaic packaging, Photovoltaic Energy Conversion, Conference Record of the 2006 IEEE 4th World Conference on. IEEE, 2, 2006, pp. 2160–2163.10.1109/WCPEC.2006.279933 ↗
11. Acetic acid production and glass transition concerns with ethylene-vinyl acetate used in photovoltaic devices10.1016/j.solmat.2006.10.009 ↗
12. G. Oreski et al. Acetic acid transmission rates of PV backsheets.
13. G. Oreski et al. Influence of Backsheet on PV Module Reliability.
14. C. Peike, P. Hülsmann, M. Blüml, et al. Impact of permeation properties and backsheet-encapsulant interactions on the reliability of PV modules. ISRN Renew. Energy, 2012, 2012.10.5402/2012/459731 ↗
15. Temperature‐dependent water vapour and oxygen permeation through different polymeric materials used in photovoltaic‐modules10.1002/pip.2273 ↗
16. Modeling of rates of moisture ingress into photovoltaic modules10.1016/j.solmat.2006.04.002 ↗