Synthesis of conjugated polymers bearing indacenodithiophene and cyclometalated platinum(II) units and their application in organic photovoltaics
Source abstract
Abstract
Abstract With the goal of applying them in organic photovoltaics (OPVs), in this study we synthesized two organometallic alternating conjugated polymers, TPT–TPyPt and TPT–TIqPt , consisting of indacenodithiophene (thiophene/phenylene/thiophene; TPT ) and cyclometalated platinum(II) moieties and compared their optical, electrochemical, and photovoltaic properties, their space charge limited currents, and their structures (density functional theory) with those of related platinum-free organic polymers, TPT–TPy and TPT–TIq . The absorption bands of the metal-based polymers were significantly red-shifted relative to those of the metal-free polymers. We fabricated OPVs incorporating blends of these polymers and [6,6]-phenyl-C 71 -butyric acid methyl ester at various weight ratios. One of these devices exhibited a power conversion efficiency (PCE) of 2.9%, with a short-circuit current density of 7.7 mA/cm 2 , an open-circuit voltage of 0.78 V, and a fill factor of 0.48, under AM 1.5 G (100 mW/cm 2 ) illumination. To the best of our knowledge, this PCE is the highest reported for a PSC based on a cyclometalated platinum-type polymer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Polymer–Fullerene composite solar cells10.1002/anie.200702506 ↗
2. Strategies for increasing the efficiency of heterojunction organic solar cells: material selection and device architecture10.1021/ar9000923 ↗
3. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
4. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
5. The OE–A OPV demonstrator anno domini 201110.1039/c1ee01891d ↗
6. Stability of polymer solar cell10.1002/adma.201104187 ↗
7. Polymer–Fullerene bulk-heterojunction solar cell10.1002/adma.200801283 ↗
8. Crystalline low band-gap alternating indolocarbazole and benzothiadiazole-cored oligothiophene copolymer for organic solar cell applications10.1039/b811031j ↗
9. Enhanced photocurrent response in photocells made with platinum-poly-yne/C60 blends by photoinduced electron transfer10.1016/0379-6779(96)80076-2 ↗
10. Efficient organic heterojunction photovoltaic cells based on triplet materials10.1002/adma.200501297 ↗
11. Platinum–acetylide polymer based solar cells: involvement of the triplet state for energy conversion10.1039/B516086C ↗
12. A fulleropyrrolidine end-capped platinum-acetylide triad: the mechanism of photoinduced charge transfer in organometallic photovoltaic cell10.1039/b700379j ↗
13. Use of a ruthenium-containing conjugated polymer as a photosensitizer in photovoltaic devices fabricated by a layer-by-layer deposition process10.1021/la052655p ↗
14. Synthesis of conjugated polymers with pendant ruthenium terpyridine trithiocyanato complexes and their applications in heterojunction photovoltaic cells10.1002/pola.22471 ↗
15. Conjugated polymers bearing iridium complexes for triplet photovoltaic devices10.1021/cm800955f ↗
16. Metallopolyyne polymers as new functional materials for photovoltaic and solar cell applications10.1002/macp.200700563 ↗
17. Tuning the absorption, charge transport properties, and solar cell efficiency with the number of thienyl rings in platinum-containing poly(aryleneethynylene)s10.1021/ja074959z ↗
18. Organometallic donor–acceptor conjugated polymer semiconductors: tunable optical, electrochemical, charge transport, and photovoltaic properties10.1021/ma8016508 ↗
19. Low-band-gap platinum acetylide polymers as active materials for organic solar cells10.1021/am800104k ↗
20. Synthesis and comparison of the optical properties of platinum(II) poly-ynes with fused and non-fused oligothiophenes10.1021/ma802399a ↗
21. High performance amorphous metallated π-conjugated polymers for field-effect transistors and polymer solar cells10.1021/cm8016424 ↗
22. Polymer solar cells based on very narrow-bandgap polyplatinynes with photocurrents extended into the near-infrared region10.1039/b803467b ↗
23. Cyclometalated platinum polymers: synthesis, photophysical properties, and photovoltaic performance10.1021/cm9029038 ↗
24. Metallated conjugated polymers as a new avenue towards high-efficiency polymer solar cells10.1038/nmat1909 ↗
25. Accessing the triplet excited state in perylenediimides10.1021/ja800333y ↗
26. Synthesis and characterization of phosphorescent cyclometalated platinum complexes10.1021/ic0255508 ↗
27. Low-band gap poly(thiophene-phenylene-thiophene) derivatives with broaden absorption spectra for use in high-performance bulk-heterojunction polymer solar cells10.1021/ja801877k ↗
28. High-performance and highly durable inverted organic photovoltaics embedding solution-processable vanadium oxides as an interfacial hole-transporting layer10.1002/adma.201102142 ↗
29. Thiophene/phenylene/thiophene-based low-bandgap conjugated polymers for efficient near-infrared photovoltaic applications10.1021/cm9007798 ↗
30. Low-bandgap conjugated polymer for high efficient photovoltaic applications10.1039/c0cc01087a ↗
31. Syntheses and structures of novel heteroarene-fused coplanar π-conjugated chromophores10.1021/ol061791y ↗
32. Yamamoto · Journal of the American Chemical Society · 1994 · 116 · 483210.1021/ja00090a031 ↗
33. Silole derivatives as efficient electron transporting materials10.1021/ja962829c ↗
34. M. Klein, P. Sandner, R. Frey, B. Riedl, O. Christensen, Compounds for treating pulmonary hypertension, WO2007118602.
35. Synthesis, characterization, and photovoltaic properties of novel semiconducting polymers with thiophene–phenylene–thiophene (TPT) as coplanar units10.1021/ma800494k ↗
36. Synthesis, properties, and electrogenerated chemiluminescence (ECL) of a novel carbazole-based chromophore10.1016/j.tetlet.2004.11.166 ↗
37. Towards chemosensing phosphorescent conjugated polymers: cyclometalated platinum(II) poly(phenylene)s10.1039/b503539b ↗
38. Phosphorescence vs fluorescence in cyclometalated platinum(II) and iridium(III) complexes of (oligo)thienylpyridines10.1021/ic200210e ↗
39. The energy gap law for triplet states in Pt-containing conjugated polymers and monomers10.1021/ja010986s ↗
40. Ladder-type oligo-p-phenylene-containing copolymers with high open-circuit voltage and ambient photovoltaic activity10.1021/ja909111p ↗
41. Evolution of lowest singlet and triplet excited states with number of thienyl rings in platinum poly-ynes10.1063/1.478382 ↗
42. Triplet states in a series of Pt-containing ethynylenes10.1063/1.1313527 ↗
43. Easily attainable phenothiazine-based polymers for polymer solar cells: advantage of S,S-dioxides into its polymer for inverted structure solar cells10.1021/ma202661b ↗