journal article·2014-09

Non-toxic ethanol based particulate inks for low temperature processed Cu2ZnSn(S,Se)4 solar cells without S/Se treatment

Kyoohee Woo, Kyujin Kim, Zhaoyang Zhong, Inhyuk Kim, Yunjung Oh, Sunho Jeong, Jooho Moon

Publisher page

Abstract

Abstract Solution processing for kesterite Cu 2 ZnSn(S,Se) 4 (CZTSSe) thin-film solar cells has the potential to provide economical and large-scale implementation of highly efficient photovoltaics. However, to date, post-sulfurization/selenization at high temperatures (500–550 °C) or highly toxic solvents have generally been involved in most fabrication routes, resulting in problems such as phase separation, chalcogen loss (or Sn loss), and safety issues. In this paper, an ethanol solvent-based precursor ink is newly designed for fabricating a CZTSSe absorber layer at much lower temperatures (as low as 400 °C) without a post-sulfurization/selenization process. The precursor ink is composed of a commercially available powder mixture of easily decomposable copper(II) formate, Zn, Sn, S, and Se, which allow us to fabricate a CZTSSe film with large grains (1–1.5 μm) and a reasonable band gap (~1.1 eV). It is found that the formation of a homogeneous CZTSSe phase could be effectively promoted by rapid annealing, suggesting that the ramping rate is a critical factor to obtaining high quality absorber layer. Our CZTSSe device (rapidly annealed at 400 °C) exhibits an efficiency of 4.67% under AM 1.5 illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Low-cost inorganic solar cells: from ink to printed device10.1021/cr100191d ↗
2. Novel non-hydrazine solution processing of earth-abundant Cu2ZnSn(S,Se)4 absorbers for thin-film solar cells10.1039/c3ta10566k ↗
3. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
4. A high efficiency electrodeposited Cu2ZnSnS4 solar cell10.1002/aenm.201100526 ↗
5. High-efficiency solution-processed Cu2ZnSn(S,Se)4 thin-film solar cells prepared from binary and ternary nanoparticles10.1021/ja3057985 ↗
6. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
7. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
8. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
9. Novel solution processing of high-efficiency earth-abundant Cu2ZnSn(S,Se)4 solar cells10.1002/adma.201201785 ↗
10. Reaction pathways for the formation of Cu2ZnSn(S,Se)4 absorber materials from liquid-phase hydrazine-based precursor inks10.1039/c2ee21529b ↗
11. Earth abundant element Cu2Zn(Sn1−xGex)S4 nanocrystals for tunable band gap solar cells: 6.8% efficient device fabrication10.1021/cm2002836 ↗
12. Hydrazine-processed Ge-substituted CZTSe solar cells10.1021/cm302881g ↗
13. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
14. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
15. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
16. CZTS nanocrystals: a promising approach for next generation thin film photovoltaics10.1039/c3ee41627e ↗
17. A non-toxic, solution-processed, earth abundant absorbing layer for thin-film solar cells10.1039/C1EE02314D ↗
18. Band-gap-graded Cu2Zn(S1−xSex)S4 solar cells fabricated by an ethanol-based, particulate precursor ink route10.1038/srep03069 ↗
19. Effect of carboxylic acid on sintering of inkjet-printed copper nanoparticulate films10.1021/am2002907 ↗
20. C. Surasit, D. Craig, Method and Apparatus Using Formic Acid Vapor as Reducing Agent for Copper Wirebonding, United States Patent 6207551.
21. Hybrid copper complex-derived conductive patterns printed on polyimide substrates10.1007/s12540-012-3017-z ↗
22. R.M. German, Novel sintering techniques, in: Sintering Theory and Practice, A Wiley-Interscience Publication, New York, 1996, pp. 373–420.
23. Diode quality factor determination for thin-film solar cells10.1016/0379-6787(89)90050-1 ↗