journal article·2016-04

Structural, optical and electrical properties of planar mixed perovskite halides/Al-doped Zinc oxide solar cells

H. AitDads, S. Bouzit, L. Nkhaili, A. Elkissani, A. Outzourhit

Publisher page

Abstract

Abstract Mixed halide perovskites CH 3 NH 3 Pb(I 1− x Br x ) 3 thin films were successfully fabricated by spin coating using a precursor solution obtained by reacting a (1:1) molar ratio of methyl-ammonium iodide (CH 3 NH 3 I) and lead bromide (PbBr 2 ). The films obtained by this one step process were used to fabricate a solar cell using an aluminum-doped Zinc oxide (Al–ZnO) thin film as an electron selective layer. The Al–ZnO films were fabricated by RF sputtering on indium-tin-oxide (ITO) covered glass substrates. The structural and optical properties of the films were analyzed by X-ray diffraction and ultraviolet–visible spectroscopy. The mixed halide pervoskite films were polycrystalline with an optical band gap of 1.85 eV. Al–ZnO/perovskite solar cells were fabricated without a hole-selective layer by directly deposition silver (Ag) contacts on the perovskite films. The electrical properties of the cells were investigated by current–voltage ( I – V ) measurements. The devices showed an open circuit voltage of 0.12 V, a fill factor of 0.29 and conversion efficiency of 1.6% under an illumination of 480 mW cm −2 . The film and cells are stable under ambient atmosphere as revealed by the absence of any changes in their color.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells10.1021/nl400349b ↗
2. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
3. Electron–hole diffusion lengths exceeding 1μm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
4. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
5. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
6. Low-temperature processed mesosuperstructured to thin-film solar cells10.1039/c3ee40810h ↗
7. Efficient planar heterojunction perovskite solar cells by vapor deposition10.1038/nature12509 ↗
8. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
9. All-solid-state hybrid solar cells based on a new organometal halide perovskite sensitizer and one-dimensional TiO2 nanowire arrays
10. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
11. ZnO nanostructures for dye-sensitized solar cells10.1002/adma.200803827 ↗
12. An investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques10.1021/nn506864k ↗
13. Pressurized melt growth of ZnO boules10.1088/0268-1242/20/4/005 ↗
14. Fabrication and characteristics of ZnO thin films deposited by RF sputtering on plastic substrates for flexible display10.1007/s11432-011-4348-y ↗
15. p-ZnO/n-GaN heterostructure ZnO light-emitting diodes10.1063/1.1940736 ↗
16. Properties of aluminum-doped ZnO thin films grown by electron beam evaporation10.1143/JJAP.28.219 ↗
17. Impressive enhancement on the cell performance of ZnO nanorods-based perovskite solar cells with Al doped ZnO interfacial modification10.1039/C4CC04908J ↗
18. Controlling the surface nanostructure of ZnO and Al-doped ZnO thin films using electrostatic spraying for their application in 12% efficient perovskite solar cells10.1039/C4NR02065K ↗
19. Effect of RF power on the structural and optical properties of RF-sputtered ZnO thin films10.1051/epjap/2014140098 ↗
20. Highly luminescent lead bromide perovskite nanoparticles synthesized with porous alumina media10.1246/cl.2012.397 ↗
21. The role of the selective contacts in the performance of lead halide perovskite solar cells10.1021/jz500059v ↗