journal article·2019-08

The effect of water in Carbon-Perovskite Solar Cells with optimized alumina spacer

Jessica Barichello, Luigi Vesce, Fabio Matteocci, Enrico Lamanna, Aldo Di Carlo

Publisher page

Abstract

Abstract Perovskite solar cells with carbon back contact (C-PSC) represent a promising architecture that allows for a simplification of the manufacture process and a stabilization of the cell performances. In this work, we designed a fully printable C-PSC using a homemade mesoporous alumina (Al2O3) ink. By increasing the alumina layer thickness we show that fill factor reduces, short-circuit current increases, while open circuit voltage increases until a thickness of 1.2 μm. In order to improve performances of PSCs, we investigated a water pre-treatment before perovskite deposition. We show that water pre-treatment improves pore filling, leads to a reduction of charge recombination, and improves the conversion of PbI2 crystals into perovskite. The water pre-treatment permits to obtain an average efficiency increasing of 16% with respect to cells without water pre-treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
3. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
4. Performance improvement of perovskite solar cells through enhanced hole extraction: the role of iodide concentration gradient10.1016/j.solmat.2018.05.025 ↗
5. Two-dimensional lead-free hybrid halide perovskite using superatom anions with tunable electronic properties10.1016/j.solmat.2018.10.021 ↗
6. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells10.1021/jz4020162 ↗
7. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell10.1021/jz400892a ↗
8. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
9. Perovskite tandem solar cells10.1002/aenm.201602761 ↗
10. Effect of selective contacts on the thermal stability of perovskite solar cells10.1021/acsami.6b15673 ↗
11. Gold and iodine diffusion in large area perovskite solar cells under illumination10.1039/C7NR00784A ↗
12. Not all that glitters is gold: metal-migration-induced degradation in perovskite solar cells10.1021/acsnano.6b02613 ↗
13. A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability10.1126/science.1254763 ↗
14. Carbon-based perovskite solar cells without hole transport materials: the front runner to the market?10.1002/adma.201603994 ↗
15. Life Cycle Assessment (LCA) of perovskite PV cells projected from lab to fab10.1016/j.solmat.2016.04.037 ↗
16. The role of printing techniques for large-area dye sensitized solar cells10.1088/0268-1242/30/10/104003 ↗
17. Taking temperature processing out of dye-sensitized solar cell fabrication: fully laser-manufactured devices10.1002/aenm.201400421 ↗
18. Laser-sintered TiO2 films for dye solar cell fabrication: an electrical, morphological and electron lifetime investigation10.1109/TED.2011.2160643 ↗
19. Outdoor performance and stability under elevated temperatures and long-term light soaking of triple-layer mesoporous perovskite photovoltaics10.1002/ente.201500045 ↗
20. One-Year stable perovskite solar cells by 2D/3D interface engineering10.1038/ncomms15684 ↗
21. 17% efficient printable mesoscopic PIN metal oxide framework perovskite solar cells using cesium-containing triple cation perovskite10.1039/C7TA07660F ↗
22. Full printable perovskite solar cells based on mesoscopic TiO2/Al2O3/NiO (carbon nanotubes) architecture10.1016/j.solener.2017.01.019 ↗
23. High photovoltage of 1 V on a steady-state certified hole transport layer-free perovskite solar cell by a molten-salt approach10.1021/acsenergylett.8b00293 ↗
24. Critical parameters in TiO2/ZrO2/Carbon-based mesoscopic perovskite solar cell10.1016/j.jpowsour.2015.05.106 ↗
25. Sequential deposition as a route to high-performance perovskite-sensitized solar cells
26. Anta Impact of moisture on efficiency-determining electronic processes in perovskite solar cells10.1039/C7TA02264F ↗
27. Enhancing moisture and water resistance in perovskite solar cells by encapsulation with ultrathin plasma polymers10.1021/acsami.7b17824 ↗
28. In-situ observation of moisture-induced degradation of perovskite solar cells using laser-beam induced current
29. Stability issues pertaining large area perovskite and dye-sensitized solar cells and modules
30. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
31. Atomistic origins of high-performance in hybrid halide perovskite solar cells10.1021/nl500390f ↗
32. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
33. Controllable perovskite crystallization by water additive for high-performance solar cells10.1002/adfm.201503559 ↗
34. Impact of H2O on organic-inorganic hybrid perovskite solar cells10.1039/C7EE01674C ↗
35. The importance of moisture in hybrid lead halide perovskite thin film fabrication10.1021/acsnano.5b03626 ↗
36. Yang YInterface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
37. Moisture assisted perovskite film growth for high performance solar cells10.1063/1.4901510 ↗
38. Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells10.1038/ncomms14555 ↗
39. Processing and characterization of a TiO2 paste based on small particles size powder for dye-sensitized solar cell semi-transparent photo-electrodes
40. Carbon based perovskite solar cells constructed by screen-printed components10.1016/j.electacta.2018.04.178 ↗
41. Improvements in printable mesoscopic perovskite solar cells viat hinner spacer layers10.1039/C8SE00332G ↗
42. Hu · 2017 · vol. 1 · 1600019
43. Printable carbon-based hole-conductor-free mesoscopic perovskite solar cells: from lab to market
44. Fabrication of spacer and catalytic layers in monolithic dye-sensitized solar cells10.1109/JPHOTOV.2013.2262374 ↗
45. The Performance of Dye-Sensitised Solar Cells with a One-Facial, Monolithic Layer Built-Up Prepared by Screen Printing
46. Low-temperature processed meso-superstructured to thin-film perovskite solar cells
47. 10 % efficiency dye-sensitized solar cells using P25 TiO2 nanocrystalline electrode prepared by a bead-milling method10.1246/cl.2011.1220 ↗
48. Investigation of Al2O3 and ZrO2 spacer layers for fully printable and hole-conductor-free mesoscopic perovskite solar cells10.1016/j.apsusc.2017.05.018 ↗
49. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
50. Hole-conductor-free mesoscopic TiO2/CH3NH3PbI3 heterojunction solar cells based on anatase nanosheets and carbon counter electrodes10.1021/jz500833z ↗
51. Improvement and regeneration of perovskite solar cells via methylamine gas post‐treatment10.1002/adfm.201703060 ↗
52. Effects of water intrusion on the charge-carrier dynamics, performance, and stability of dye-sensitized solar cells10.1039/c2ee22178k ↗
53. Anthocyanins and betalains as light-harvesting pigments for dye-sensitized solar cells10.1016/j.solener.2012.02.018 ↗
54. Applications of functionalized transition metal complexes in photonic and optoelectronic devices10.1016/S0010-8545(98)00189-1 ↗
55. Low-temperature processed and carbon-based ZnO/CH3NH3PbI3/C planar heterojunction perovskite solar cells10.1021/jp512101d ↗
56. Impedance spectroscopic analysis of lead iodide perovskite-sensitized solid-state solar cells10.1021/nn404323g ↗