Physical properties and photoresponse of Cu–Ag–In–S semiconductor electrodes created using chemical bath deposition
Source abstract
Abstract
Abstract Cu–Ag–In–S solid solution semiconductor films were grown on indium–tin oxide-coated glass substrates using chemical bath deposition. New procedures for the growth of Cu–Ag–In–S semiconductor films are presented. The optical, electrical, and photoelectrochemical performances of the ternary CuInS 2 , AgIn 5 S 8 , and their solid solutions are investigated. The X-ray diffraction patterns of samples reveal a change in the crystal phase of the samples from the tetragonal CuInS 2 to the cubic AgIn 5 S 8 phase with an increase in the [Ag/(Cu+Ag)] molar ratio in precursor solutions. The thicknesses and band gaps of the samples, determined from the surface profile measurements and transmittance spectra, are in the ranges of 841–2107 nm and 1.42–1.75 eV, respectively. The highest photoresponse was observed in the sample with [Ag/(Ag+Cu)]=0.4 (sample (d)) under illumination with a white light intensity of 100 mW/cm 2 . The results show that Cu–Ag–In–S film electrodes have potential in solar to hydrogen applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
2. CIGS J-V distortion in the absence of blue photons10.1016/j.tsf.2004.11.099 ↗
3. Visible-light-induced H2 evolution from an aqueous solution containing sulfide and sulfite over a ZnS–CuInS2–AgInS2 solid-solution photocatalyst10.1002/anie.200500314 ↗
4. Photocatalytic H2 evolution under visible light irradiation on AgIn5S8 photocatalyst10.1016/j.jpcs.2007.07.059 ↗
5. Electronic properties versus composition of thin films of CuInSe210.1063/1.95350 ↗
6. Alternative deposition methods of copper and silver indium ternary sulphides with spinel structure10.1016/j.tsf.2006.12.076 ↗
7. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 82.1% fill factor10.1002/pip.822 ↗
8. Photocatalytic hydrogen evolution over delafossite CuAlO210.1016/j.ijhydene.2004.06.011 ↗
9. H2 evolution from aqueous potassium sulfite solutions under visible light irradiation over a novel sulfide photocatalyst NaInS2 with a layered structure10.1246/cl.2002.882 ↗
10. Indium induced band gap tailoring in AgGa1−xInxS2 chalcopyrite structure for visible light photocatalysis10.1063/1.2900984 ↗
11. Photoelectrochemical characterization of CIGS thin films for hydrogen production10.1016/j.solmat.2004.10.011 ↗
12. The physical properties and photoresponse of AgIn5S8 polycrystalline film electrodes fabricated by chemical bath deposition10.1016/j.jphotochem.2007.03.015 ↗
13. Physical properties of AgIn5S8 polycrystalline films fabricated by solution growth technique10.1016/j.matchemphys.2007.08.035 ↗
14. Physical properties of CuxAg1−xIn5S8 single crystals and related surface-barrier structures10.1134/1.1187539 ↗
15. Investigation of the influence of silver on the crystal growth of CuInS2 thin films10.1016/S0040-6090(99)00774-9 ↗
16. Production and investigation of AgIn5S8/(InSe, GaSe) heterojunctions10.1134/1.1187773 ↗
17. Material analysis of PVD-grown indium sulphide buffer layers for Cu(In,Ga)Se2-based solar cells10.1016/j.tsf.2004.11.017 ↗
18. Structural and optical characterization of RF reactively sputtered CuInS2 thin films10.1016/S0040-6090(01)01533-4 ↗
19. Preparation of stoichiometric CuInS2 surfaces—an XPS and UPS study10.1016/S0040-6090(03)00150-0 ↗
20. Non-aqueous chemical bath deposition of Sb2S3 thin films10.1016/S0040-6090(99)00362-4 ↗
21. Simple chemical method for nanoporous network of In2S3 platelets for buffer layer in CIS solar cells10.1016/j.jmatprotec.2007.11.307 ↗
22. Chemical deposition method for metal chalcogenide thin films10.1016/S0254-0584(00)00217-0 ↗
23. JCPDS No. 26-1477, XRD Diffraction File, Joint Committee on Powder Diffraction Standard, ASTM, Newtown Square, PA, USA, 2002.
24. JCPDS No. 89-6095, XRD Diffraction File, Joint Committee on Powder Diffraction Standard, ASTM, Newtown Square, PA, USA, 2002.
25. JCPDS No. 39-1058, XRD Diffraction File, Joint Committee on Powder Diffraction Standard, ASTM, Newtown Square, PA, USA, 2002.
26. Photocatalytic H2 evolution reaction from aqueous solutions over band structure-controlled (Agln)xZn2(1−x)S2 solid solution photocatalysts with visible-light response and their surface nanostructures10.1021/ja048296m ↗
27. Photocatalytic H2 evolution under visible-light irradiation over band-structure-controlled (CuIn)xZn2(1−x)S2 solid solutions10.1021/jp044722e ↗
28. Effect of Cu/In molar ratio on the microstructural and optical properties of microcrystalline CuInS2 prepared by solvothermal route10.1016/j.materresbull.2007.10.013 ↗
29. Penetration and energy-loss theory of electrons in solid targets10.1088/0022-3727/5/1/308 ↗
30. Moulder · 1982
31. Preparation and characterizations of visible light responsive (Ag–In–Zn)S thin film electrode by chemical bath deposition10.1016/j.jtice.2008.09.001 ↗
32. Shape-controlled synthesis and optical characterization of chalcopyrite CuInS2 microstructures10.1016/j.jcrysgro.2007.02.040 ↗
33. Controlled deposition of silver indium sulfide ternary semiconductor thin films by chemical bath deposition10.1021/cm702081h ↗
34. Perrin · 1979
35. Hassell · 2007
36. Effect of [Cu]/[In] ratio on properties of CuInS2 thin films prepared by successive ionic layer absorption and reaction method10.1016/j.apsusc.2005.05.055 ↗
37. Synthesis and optical characterization of polymer-capped nanocrystalline ZnS thin films by chemical process10.1016/j.physe.2005.11.015 ↗
38. Preparation and characterization of copper indium disulfide films by facile chemical method10.1016/j.mseb.2007.01.036 ↗
39. Determination of flat band potential and photocurrent response in (Cd,Zn)S used in photoelectrolysis process10.1016/S0360-3199(01)00084-2 ↗
40. Photoelectrochemical behavior of In2S3 formed on sintered In2O3 pellets10.1016/S0927-0248(99)00161-0 ↗
41. WO3 thin films for photoelectrochemical purification of water10.1016/j.chemosphere.2006.10.024 ↗