journal article·2006-07

A new method based on charge parameters to analyse the performance of stand-alone photovoltaic systems

F.J. Muñoz, G. Almonacid, G. Nofuentes, F. Almonacid

Publisher page

Abstract

Abstract The monitored data in photovoltaic systems are processed to determine overall energy balances which, together with the energy efficiencies and indices of performance, give a good indication of the performance of PV systems. However, the analysis based on energy parameters shows some shortcomings when they are used to analyse the performance of stand-alone photovoltaic (SAPV) systems, especially those without Maximum Power Point Tracker (MPPT). This kind of systems represents a large percentage of the SAPV systems (e.g. demonstration projects, consumer and industrial applications, Solar Home Systems in developing countries, etc.). This paper tries to give an alternative method that manages to analyse this kind of systems in a better way. This method is based on a translation of the energy parameters given by the Joint Research Center and the IEC Standard 61724 into new charge-related parameters. It must be said that charge parameters can be used by themselves to evaluate the system performance. Therefore, it is not necessary to deduce energy parameters using the nominal battery voltage. The monitored data of two SAPV systems without MPPT are used to compare the performance of these systems based on energy parameters with the analysis provided by the new charge parameters. This study will highlight the advantages of the charge parameters method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · solar cell performance optimization · Solar Radiation and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Commission of the European Communities, Photovoltaic System Monitoring, Guidelines for the Assesement of Photovoltaic Plants, Document A, version 4.3, March 1997.
2. Commission of the European Communities, Photovoltaic System Monitoring, Guidelines for the Assesement of Photovoltaic Plants, Document B, version 4.3, March 1997.
3. International Standard IEC 61724. Photovoltaic System Performance Monitoring—Guidelines for Measurement, Data Exchange and Analysis, first ed., International Electrotechnical Commission (IEC), Geneve, April 1998.
4. D. Mayer, M. Heidenreich, Performance analysis of stand-alone PV Systems from a rational use of energy point of view, in: Proceedings of the Third World Conference on Photovoltaic Energy Conversion, Osaka, Japan, June 2003.
5. A. Sobirey, H. Riess, P. Sprau, Matching factor—a new tool for the assesment of stand-alone systems, in: Proceedings of the Second World Conference and Exhibition, Vienna, Austria, July 1998.
6. PV Design Center, Stand-Alone Photovoltaic Systems, A Handbook of Recommended Design Practices, Sandia National Laboratories Albuquerque, NM, USA, 1993.
7. R. Messenger, J. Ventre, Photovoltaic Systems Engineering, CRC Press, Boca Raton, FL, 2000, pp. 193–235.
8. Integration of PV Systems on health emergency vehicle10.1002/pip.558 ↗
9. M.A. Abella, Sistemas Fotovoltaicos, Inroducción al Diseño y Dimensionado de Instalaciones de Energía Solar Fotovoltaica, S.A.P.T Publicaciones Técnicas S.L.: Madrid, 2001, p. 244.
10. Markvart · 2003
11. IEEE Standard 1361, IEEE Guide for Selection, Charging and Evaluation of Lead–Acid Batteries uses in Stand-Alone Photovoltaic (PV) Systems, IEEE, New York, December 2003, p. 18.
12. Report IEA PVPS Task 3, Management of Storage Batteries used in Stand-Alone Photovoltaic Power Systems.
13. A. Luque, S. Hegedus S. Handbook of Photovoltaic Science and Engineering, Wiley, Chichester, 2003, p. 785.10.1002/0470014008 ↗
14. Report IEA-PVPS T3-18:2004, Evaluation of Energy Storage Devices in Stand-Alone PV Power Systems, p. 9.