journal article·2012-10

Effect of sodium on recrystallization and photovoltaic properties of CdTe solar cells

L. Kranz, J. Perrenoud, F. Pianezzi, C. Gretener, P. Rossbach, S. Buecheler, A.N. Tiwari

Publisher page

Abstract

Abstract During processing of CdTe solar cells, sodium can diffuse from the glass substrate into the active layers and can considerably affect CdTe solar cell properties. In this paper, the effects of sodium on structural and photovoltaic properties of low temperature grown CdTe solar cells are investigated in detail. Presence of sodium during the CdCl 2 treatment enhances CdTe grain growth and causes widening of grain boundaries, creating pinholes and possible shunt paths in the solar cell. Furthermore, even small concentrations of sodium strongly enhance CdS–CdTe intermixing and a recrystallization leading to CdS island formation, which results in direct contacts between absorber and transparent front contact. Due to sodium present during the CdCl 2 treatment the space charge region width strongly decreased, indicating the possibility of increasing acceptor density in CdTe. In spite of the doping effect, cells, which were CdCl 2 -treated in the presence of sodium, showed deterioration of photovoltaic performance due to excessive CdS–CdTe intermixing and electrical shunting. A sufficiently thick and large grained TCO layer of ZnO:Al can effectively suppress sodium diffusion in low temperature grown CdTe solar cells on soda-lime glass preventing the deterioration of solar cell properties due to sodium. This enabled the growth of 13.5% efficiency ( V OC =853 mV, FF=74.4%, J SC =21.3 mA cm −2 , without anti-reflection coating) CdTe solar cells on low cost soda-lime glass without additional diffusion barrier layer in spite of large sodium content of the substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. 〈http://investor.firstsolar.com/releasedetail.cfm?ReleaseID=593994〉, 2011 (accessed on 31.10.11).
2. High-efficiency polycrystalline CdTe thin-film solar cells10.1016/j.solener.2004.06.006 ↗
3. Fabrication of flexible CdTe solar modules with monolithic cell interconnection10.1016/j.solmat.2010.11.019 ↗
4. Doping
5. Shallow acceptors in cadmium telluride10.1002/pssb.2221090222 ↗
6. Strategies to increase CdTe solar-cell voltage10.1016/j.tsf.2006.12.147 ↗
7. Y. Yan, X. Li, R. Dhere, M. Al-Jassim, K. Jones, M. Young, M. Scott, SiO2 as barrier layer for Na out-diffusion from soda-lime glass, in: Proceedings of the 36th IEEE Photovoltaic Specialist Conference, Honolulu, 2010, pp. 2519–2521.10.1109/PVSC.2010.5614657 ↗
8. The distribution of impurities in the interfaces and window layers of thin-film solar cells10.1063/1.1921344 ↗
9. Grain boundaries and impurities in CdTe/CdS solar cells10.1016/S0040-6090(01)01518-8 ↗
10. R. Dhere, K. Ramanathan, J. Keane, J. Zhou, H. Moutinho, S. Asher, R. Noufi, Effect of Na incorporation on the growth and properties of CdTe/CdS devices, in: Proceedings of the 31st IEEE Photovoltaic Specialist Conference, Lake Buena Vista, 2005, pp. 279–282.10.1109/PVSC.2005.1488123 ↗
11. K. Durose, D. Albin, R. Ribelin, R. Dhere, D. King, H. Moutinho, R. Matson, P. Dippo, J. Hiie, D.H. Levi, The influence of NaCl on the microstructure of CdS films and CdTe solar cells, in: Proceedings of the Microscopy of Semiconductor Materials Conference, Oxford, 1999, pp. 207–210.
12. Analysis of post deposition processing for CdTe/CdS thin film solar cells10.1016/0379-6787(91)90095-7 ↗
13. Analysis of bulk and interface phenomena in CdTe/CdS thin-film solar cells10.1023/B:INTS.0000028655.11608.c7 ↗
14. CdS enhances VOC and FF in CdS/CdTe and CdS/CuInSe2 solar cells10.1063/1.3256190 ↗
15. Cadmium telluride solar cells
16. Doping limits in II–VI compounds - challenges, problems and solutions10.1016/S0960-8974(98)00011-4 ↗
17. The use of aluminium doped ZnO as transparent conductive oxide for CdS/CdTe solar cells10.1016/j.tsf.2010.12.234 ↗
18. D.G. Jensen, B.E. McCandless, R.W. Birkmire, Thin film cadmium telluride–cadmium sulfide alloys and devices, in: Proceedings of the 25th Photovoltaic Specialists Conference, Washington, 1996, pp. 773–776.10.1109/PVSC.1996.564242 ↗
19. Die Konstitution der Mischkristalle und die Raumfuellung der Atome10.1007/BF01349680 ↗
20. Comparison of structural and electrical properties of Cu(In,Ga)Se2 for substrate and superstrate solar cells10.1016/S0040-6090(01)01508-5 ↗
21. SIMS depth profiling of CdTe based solar cells grown on sapphire substrates10.1016/j.tsf.2005.11.094 ↗