journal article·2009-09

High-performance polymer photovoltaic devices with inverted structure prepared by thermal lamination

Motoshi Nakamura, Chunhe Yang, Keisuke Tajima, Kazuhito Hashimoto

Publisher page

Abstract

Abstract Use of a lamination process for the introduction of Au electrode, instead of conventional metal evaporation, improved the power conversion efficiency (PCE) of inverted-structure photovoltaic devices from 1.6% to 2.6% based on a bulk heterojunction of poly(3-hexylthiophene) (P3HT) and (6,6)-phenyl C61 butyric acid methyl ester (PCBM). X-ray photoelectron spectroscopy indicated that a thin layer of P3HT is spontaneously formed at the air/polymer blend layer interface during the spin-coating process. It is suggested that the vacuum-evaporated gold could destroy the surface-segregated thin layer of P3HT, while the lamination process preserves the surface structure working as an electron-blocking layer. The insertion of a PEDOT:PSS layer, between the metal electrode and polymer layer, in the lamination process further improved the PCE to 3.3% with a short-circuit current density of 9.94 mA cm−2, an open-circuit voltage of 0.60 V, and a fill factor of 55% under AM1.5 100 mW cm−2 irradiation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Polymer photovoltaic cells-enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
3. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
4. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C-61 blends10.1063/1.2006986 ↗
5. A hybrid planar-mixed molecular heterojunction photovoltaic cell10.1002/adma.200400617 ↗
6. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
7. Organic photovoltaics-polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
8. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
9. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
10. Hybrid polymer-metal oxide thin films for photovoltaic applications10.1039/b706547g ↗
11. Small bandgap polymers for organic solar cells (polymer material development in the last 5 years)10.1080/15583720802231833 ↗
12. Fabrication and processing of polymer solar cells: A review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
13. Large area plastic solar cell modules10.1016/j.mseb.2006.06.008 ↗
14. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
15. Organic solar cell modules for specific applications-From energy autonomous systems to large area photovoltaics10.1016/j.tsf.2007.12.093 ↗
16. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
17. Organic solar cells protected by very thick naphthalene tetracarboxylic anhydride films10.1063/1.1840126 ↗
18. Electrical shorting of organic photovoltaic films resulting from metal migration10.1063/1.2171781 ↗
19. Organic-oxide cathode buffer layer in fabricating high-performance polymer light-emitting diodes10.1002/adfm.200800403 ↗
20. Out-door testing and long-term stability of plastic solar cells10.1051/epjap:2006159 ↗
21. Analysis of the failure mechanism for a stable organic photovoltaic during 10000h of testing10.1002/pip.794 ↗
22. Flexible organic P3HT: PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
23. Laminated fabrication of polymeric photovoltaic diodes10.1038/26183 ↗
24. Organic light-emitting diodes formed by soft contact lamination10.1073/pnas.0304179101 ↗
25. Efficient conjugated-polymer optoelectronic devices fabricated by thin-film transfer-printing technique10.1002/adfm.200701321 ↗
26. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
27. A semi-transparent plastic solar cell fabricated by a lamination process10.1002/adma.200701101 ↗
28. The surface engineering of top electrode in inverted polymer bulk-heterojunction solar cells10.1063/1.2904967 ↗
29. A simple nanostructured polymer/ZnO hybrid solar cell-preparation and operation in air10.1088/0957-4484/19/42/424013 ↗
30. Printable anodes for flexible organic solar cell modules10.1016/j.tsf.2003.11.038 ↗
31. High-conductivity large-area semi-transparent electrodes for polymer photovoltaics by silk screen printing and vapour-phase deposition10.1016/j.solmat.2005.02.004 ↗
32. Solution-processed metal nanowire mesh transparent electrodes10.1021/nl073296g ↗
33. Biodegradable polymer solar cells10.1016/j.solmat.2008.02.002 ↗
34. Electrode grids for ITO-free organic photovoltaic devices10.1002/adma.200602561 ↗
35. Transparent polymer cathode for organic photovoltaic devices10.1016/j.synthmet.2006.07.006 ↗
36. ITO-free wrap through organic solar cells-A module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
37. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
38. Self-organized buffer layers in organic solar cells10.1002/adma.200792876 ↗
39. Buffer layer formation in organic photovoltaic cells by self-organization of poly(dimethylsiloxane)s10.1016/j.orgel.2008.12.014 ↗
40. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
41. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
42. Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer10.1063/1.2918983 ↗