Au–Cu/p–CdTe/n–CdO/glass-type solar cells
Source abstract
Abstract
Abstract The heterostructure design proposed by us for the photovoltaic (PV) solar cell is: Au–Cu/p–CdTe:Sb/n–CdO:F/glass. The CdO:F films were grown by the sol–gel method, in conditions in order to get low resistivity ∼4.5×10 −4 Ω-cm and an optical transmission higher than 85%. The CdTe:Sb films were prepared by means of the RF sputtering technique, in conditions to get resistivity value around 10 6 Ω-cm, high crystalline quality and higher grain size. The Au–Cu contacts were thermally evaporated. For the study of PV-heterostructure a systematic variation of the preparation parameters were carried out. The parameters involved in the manufacture of the cell, in order to look for the highest efficiency were: (A) For the deposit of the p-CdTe:Sb films, a low argon pressure of 2.5 m Torr and high substrate temperature of 450 °C. The CdTe:Sb film thickness was varied in the interval 4.5–11 μm. (B) For the activation of the heterostructure: (i) The treatment temperature in vacuum, after the CdTe is deposited, was varied in the 350–550 °C range and (ii) the treatment temperature in Ar atmosphere, after the heterostructure is dipped in CdCl 2 solution, was studied in the 400–510 °C range. (C) Optimization of the Cu–Au contact with the adequate Cu-film thickness. The highest energy conversion efficiency ( η ) value was 5.48%. This work reports a systematic study of the parameters involved in the solar cell manufacture, for the search of a better value of η .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Mirsagatov · Appl. Sol. Energy · 1991 · 27 · 41
2. Sravani · Thin Solid Films · 1994 · 253 · 33910.1016/0040-6090(94)90344-1 ↗
3. D.L. Morel, C.S. Ferekides, Final Technical Report October 2003, NREL/SR-520-35092, pp. 2–7.
4. A. Al-Quraini, C.H. Champness, in: Proceedings of the 26th IEEE Photovoltaic Specialist Conference, Anaheim, CA, USA, 1997, p. 415.
5. Hameş · Sol. Energy · 2004 · 77 · 29110.1016/j.solener.2004.05.014 ↗
6. Santos-Cruz · Sol. Energy · 2006 · 80 · 14210.1016/j.solener.2005.04.010 ↗
7. Santos-Cruz · Thin Solid Films · 2005 · 493 · 8310.1016/j.tsf.2005.07.237 ↗
8. J. Santos-Cruz, G. Torres-Delgado, O. Zelaya-Angel, C.I. Zúñiga-Romero, Thin Solid Films, submitted for publication.
9. Niles · Appl. Surf. Sci. · 1998 · 136 · 22110.1016/S0169-4332(98)00340-7 ↗
10. Chou · J. Electrochem. Soc. · 1995 · 142 · 25410.1149/1.2043891 ↗
11. Picos-Vega · J. Appl. Phys. · 1998 · 83 · 76010.1063/1.366640 ↗
12. Iller · Cryst. Res. Technol. · 1998 · 33 · 40110.1002/(SICI)1521-4079(1998)33:3<401::AID-CRAT401>3.0.CO;2-U ↗
13. Dobson · Adv. Mater. · 2001 · 13 · 149510.1002/1521-4095(200110)13:19<1495::AID-ADMA1495>3.0.CO;2-# ↗
14. Kazmerski · 1980
15. Ferekides · Sol. Energy · 2004 · 77 · 82310.1016/j.solener.2004.05.023 ↗
16. McCandless · Sol. Energy · 2004 · 77 · 83910.1016/j.solener.2004.04.012 ↗