journal article·2004-05

Experimental investigation of performance of a multi-purpose PV-slat window

J. Khedari, J. Waewsak, W. Supheng, J. Hirunlabh

Publisher page

Abstract

Abstract This paper reports on experimental investigation of performance of a new type of PV-slat window (PV-SW). The main functions of this PV-SW are as follows: to admit sufficient daylight, to act as a shading device for decreasing direct heat gain through window glazing and to ensure indoor air movement, which improves resident's thermal comfort. To assess the performance of this PV-SW, two test rooms of 1×1×1.5 m3 (H:W:L) volume were built using plywood and gypsum boards. At the first, the PV-SW of 0.5×0.6 m2 surface area was located at the south-facing wall whereas the other room was equipped with a commercial transparent slat window of the same size. The PV-SW consists of six PV slats. The photovoltaic cells were connected in series giving a maximum electrical power output of 36 W (12 V×3 A). The circuit was connected to a direct current axial fan, located inside the room, that requires a maximum power of 43 W. The analysis of performance of this PV-SW was investigated based on power output, daylight factor and temperature difference between indoor and ambient. The experimental results showed that this multi-purpose PV-SW is extremely interesting as it can produce power up to 15 W, decrease indoor temperature and provide sufficient light for housing. The maximum indoor illumination was about 750 lx with slats angle of 68°. The room temperature was about 2–3oC lower than that of room equipped with transparent slats.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Energy Systems and Technologies · Building Energy and Comfort Optimization · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Daylight potential in Thailand10.1080/00908319608908819 ↗
2. Design, development, and testing of an automated window shade controller10.1115/1.2847872 ↗
3. The effect of slat angle windows with venetian blinds on heating and cooling loads of buildings in South Korea10.1016/0360-5442(95)00074-Q ↗
4. Occupant control of passive systems10.1016/S0360-1323(99)00074-8 ↗
5. Heat transfer analysis in an automated venetian blind window system10.1115/1.3268291 ↗
6. The performance of innovative daylighting systems10.1016/0960-1481(94)90113-9 ↗
7. Making better use of natural light with a light-redirecting double-glazing system10.1016/S0038-092X(99)00022-5 ↗
8. A glazing unit for solar control, daylighting and energy conservation10.1016/S0038-092X(00)00132-8 ↗
9. A study of U-factor of a window with a cloth curtain10.1016/S1359-4311(00)00071-5 ↗
10. A study of U-factor of the window with a high reflectivity venetian blind10.1016/S0038-092X(99)00065-1 ↗
11. J. Waewsak, Designing of an original Thai bio-climatic roof, Ph.D. Dissertation, Energy Technology Program, King Mongkut's University of Technology Thonburi, 2001.10.1016/B978-008043865-8/50383-4 ↗
12. Daylighting for energy efficient lighting
13. Daylighting for energy conservation in the tropics10.1016/0360-5442(95)00108-5 ↗
14. W. Supheng, Designing of a multi-purpose PV-window, Master of Engineering Thesis, Energy Technology Program, King Mongkut's University of Technology Thonburi, (1999).
15. A method of obtaining visual comfort using fixed shading devices in rooms10.1016/S0360-1323(98)00024-9 ↗
16. Ventilation impact of a solar chimney on indoor temperature fluctuation and air change in a school building10.1016/S0378-7788(99)00042-0 ↗