journal article·2009-10

TiO2 films obtained by microwave-activated chemical-bath deposition used to improve TiO2-conducting glass contact

I. Zumeta, J.A. Ayllón, B. González, X. Domenech, E. Vigil

Publisher page

Abstract

Abstract In traditional solar cells, metal-semiconductor contacts used to extract photogenerated carriers are very important. In dye-sensitized solar cells (DSSC) not much attention has been given to contact between the TiO 2 and the transparent conducting glass (TCO), which is used instead of a metal contact to extract electrons. TiO 2 layers obtained by microwave-activated chemical-bath deposition (MW-CBD) are proposed to improve TiO 2 contact to conducting glass. Spectra of incident photon to current conversion efficiency (IPCE) are obtained for two-photoelectrode TiO 2 photoelectrochemical cells. IPCE spectra show higher values when TiO 2 double layer photoelectrodes are used. In these, the first layer or contacting layer is made by MW-CBD. Best results are obtained for double layer photoelectrodes on FTO (SnO 2 :F) as conducting oxide substrate. Modeling of IPCE spectra reveals the importance of electrical contact and electron extraction rate at the TiO 2 /TCO interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. How does back-reaction at the conducting glass substrate influence the dynamic photovoltage response of nanocrystalline dye-sensitized solar cells?10.1021/jp0407270 ↗
2. Single- and double-layered mesoporous TiO2/P25 TiO2 electrode for dye-sensitized solar cell10.1016/j.solmat.2004.06.010 ↗
3. Characterization of titanium dioxide blocking layers in dye-sensitized nanocrystalline solar cells10.1021/jp030790+ ↗
4. How important is the back reaction via the substrate in dye-sensitized nanocrystalline solar cells?10.1021/jp0405759 ↗
5. Illumination intensity dependence of the photovoltage in nanostructured TiO2 dye-sensitized solar cells10.1021/jp051515l ↗
6. Investigation of the electric field in TiO2/FTO junctions used in dye-sensitized solar cells by photocurrent transients10.1021/jp046211y ↗
7. Two-layer TiO2 nanostructured photoelectrode with underlying film obtained by microwave-activated chemical bath deposition (MW-CBD)10.1088/0268-1242/19/5/L03 ↗
8. Influence of the built-in voltage on the fill factor of dye-sensitized solar cells10.1021/jp036039i ↗
9. Electron tunneling at the TiO2/substrate interface can determine dye-sensitized solar cell performance10.1021/jp047686s ↗
10. The role of a “Schottky barrier” at an electron-collection electrode in solid-state dye-sensitized solar cells10.1002/adma.200502256 ↗
11. The role of conducting-oxide substrate type and morphology in TiO2 films grown by microwave chemical bath deposition (MW-CBD) and their photovoltaic characteristics10.1016/j.jcrysgro.2003.10.046 ↗
12. Modelling interfacial charge transfer in dye-sensitised solar cells10.1016/j.jphotochem.2003.12.025 ↗
13. Theoretical model for action spectrum and the current–voltage characteristics of microporous semiconductor films in photoelectrochemical cells10.1021/j100072a023 ↗
14. Electron transport in porous nanocrystalline TiO2 photoelectrochemical cells10.1021/jp9616573 ↗
15. The nature of electron migration in dye-sensitized nanostructured TiO210.1021/jp001016e ↗
16. Intensity dependence of the back reaction and transport of electrons in dye-sensitized nanocrystalline TiO2 solar cells10.1021/jp993220b ↗
17. Laser-induced photovoltage transient studies on nanoporous TiO2 electrodes10.1021/jp036786f ↗
18. Electron transport in the dye sensitized nanocrystalline cell10.1016/S1386-9477(02)00384-3 ↗
19. Influence of grain morphology on electron transport in dye sensitized nanocrystalline solar cells10.1021/jp026798l ↗
20. Formation of anatase TiO2 by microwave processing10.1016/j.solmat.2004.02.041 ↗
21. A comparison of microwave and conventional heat treatments of nanocrystalline TiO210.1016/j.solmat.2006.06.059 ↗
22. Demonstrating electron transfer and nanotechnology: a natural dye-sensitized nanocrystalline energy converter10.1021/ed075p752 ↗
23. Conversion of light to electricity by cis-XzBis(2,2′-bipyridyl-4,4′-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X=C1-, Br-, I-, CN-, and SCN-) on nanocrystalline TiO2 electrodes10.1021/ja00067a063 ↗
24. Comparative study of nanocrystalline TiO2 photoelectrodes based on characteristics of nanopowder used10.1016/S0927-0248(02)00247-7 ↗
25. Electronic transport in dye-sensitized nanoporous TiO2 solar cells–comparison of electrolyte and solid-state devices10.1021/jp0222144 ↗
26. Photocurrent-determining processes in quasi-solid-state dye-sensitized solar cells using ionic gel electrolytes10.1021/jp034248x ↗
27. Effect of the surface-state distribution on electron transport in dye-sensitized TiO2 solar cells: nonlinear electron-transport kinetics10.1021/jp000836o ↗
28. Structural and optoelectronic characterization of TiO2 films prepared using the sol–gel technique10.1088/0268-1242/22/7/006 ↗