journal article·2001-08

Network analysis of fault-tolerant solar photovoltaic arrays

N.K. Gautam, N.D. Kaushika

Publisher page

Abstract

Large solar photovoltaic array networks have been investigated to find a configuration that is comparatively less susceptible to electrical mismatches due to manufacturer's tolerances in solar cell characteristics and shadow problems. Three network configurations have been selected for comparison: series-parallel, total-crossed-tied and bridge-linked. Explicit mathematical analysis based on randomly generated parameters of solar cell characteristics is presented. Series resistance of the constituent cells has been taken into account. The computational schemes for the array configurations of arbitrary size have been developed and implemented in numerical algorithms and computer programs. The illustrative numerical computations have shown that the bridge-linked array interconnection network under most conditions is superior to and never worse than the total-cross-tied and significantly superior to the series-parallel network in its fault-tolerance due to shadow effects and manufacturer's tolerances in cell characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Photovoltaic Systems and Sustainability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. J.J. Appelbaum, J. Bani, A. Braunstein, Array power output of non-identical cells, Proceedings of the 12th Intersociety Energy Conversion Engineering Conference, Washington, DC, USA, 1977, pp. 1686–1692.
2. Power loss in photovoltaic arrays due to mismatch in cell characteristics10.1016/0038-092X(79)90121-X ↗
3. C. Gonzalez, R. Weaver, Circuit design considerations for photovoltaic modules and systems, Proceedings of the 14th IEEE Photovoltaics Specialists Conference , San Diego, USA, 1980, IEEE, New York, 1980, pp. 528–535.
4. R. G. Ross, Reliability and performance experience with flat-plate photovoltaic modules, Proceedings of the fourth E.C. Photovoltaic Solar Energy Conference, Stresa, Italy, 1982, IEEE, New York, p. 10.10.1007/978-94-009-7898-0_28 ↗
5. Computer simulation of the effects of electrical mismatches in photovoltaic cell interconnection circuits10.1016/0379-6787(88)90059-2 ↗
6. F.A. Blake, K.L. Hanson, The ‘hot-spot’ failure mode for solar arrays, Proceedings of the fourth International Energy Conversion Engineering Conference, 1969, p. 575.
7. Electrical output of shadowed solar arrays10.1109/T-ED.1971.17231 ↗
8. Effect of shading on CDs/CuxS solar cells and optimal array design10.1016/0013-7480(75)90083-2 ↗
9. Effect of shunt resistance and bypass diode on the shadow tolerance of solar cell modules10.1016/0379-6787(82)90026-6 ↗
10. N.F. Shephard and R.S. Sugimura, The integration of bypass diode with terrestrial photovoltaic modules and arrays, Proceedings of the 17th IEEE Photovoltaic Specialists Conference, Kissimmee, FL, USA, IEEE, New York, 1984, p. 676.
11. Numerical simulation of current-voltage characteristics of photovoltaic systems with shaded solar cells10.1016/0038-092X(96)00006-0 ↗
12. R.G. Ross, Photovoltaic module and array reliability, Proceedings of 15th IEEE Photovoltaic Specialists’ Conference, Orlando, FL, USA, IEEE, New York, 1981, p. 1157.
13. A. Brandstetter, Solar cell array studies, In: S.V. Szokolay (Ed.), Proceedings of the Solar World Congress, Australia, Vol. 4, Permagon Press, 1983, pp. 1549–1553.
14. Characterization of PV array output using a small number of measured parameters10.1016/0038-092X(84)90136-1 ↗
15. Kaushika · 1999
16. Green · 1982
17. Law · 1982
18. Van Valkenburg · 1974
19. Treble · 1991