Photovoltaic devices based on PPHT: ZnO and dye-sensitized PPHT: ZnO thin films
Source abstract
Abstract
Abstract We have investigated the optical and photovoltaic properties of hybrid organic solar cells based on the blend of poly-3-phenylhydrazone thiophene (PPHT):ZnO and PPHT:dye:ZnO. In this architecture, ZnO and PPHT were the electron acceptor and donor, respectively, and dye was used both as acceptor as well as sensitizer to enhance the photon absorption in visible region. These results showed that on incorporation of dye in PPHT: ZnO composite the light absorption, exciton separation and photocurrent under white light dramatically enhanced. The dependence of photovoltaic parameters on the weight fraction of ZnO in PPHT: ZnO was also investigated. It is found that the device with 45% of ZnO in both composites exhibits the best photovoltaic performance. The thermal annealing of PPHT: ZnO-based device gives rise to a significant increase in power conversion efficiency as evident from the measurements of incident photon to charge carrier efficiency (IPCE) spectra and current–voltage characteristics under illumination. The absorption band of PPHT: ZnO blend becomes stronger and the absorption peak ascribed to PPHT is shifted towards the longer wavelength region (red shift) upon thermal annealing. The effect of solvent used for thin-film fabrication was also studied. It is also observed that the fluorescence (FL) quenching and solar cell efficiency were found to be strongly dependent on the solvent used for spin coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. High efficiency solution processable polymer photovoltaic cells by self organization of polymer blends10.1038/nmat1500 ↗
2. High open circuit voltage single layer poly bithiophene based photovoltaic devices10.1007/s10008-006-0200-5 ↗
3. Conjugated polymers photovoltaic cells10.1021/cm049654n ↗
4. Organic photovoltaic technology and market10.1016/j.solmat.2004.02.030 ↗
5. Effect of postproduction treatment of plastic solar cells10.1002/adfm.200390011 ↗
6. Efficiency enhancement in low band gap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
7. Solution processed organic tandem solar cells10.1002/adfm.200600138 ↗
8. Production aspects of organic photovoltaics and their impact on the commercialization of the devices10.1557/mrs2005.10 ↗
9. Huynh · Hybrid Nanorod Polymer Sol. Cells Sci. · 2002 · 295 · 2425
10. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
11. Device physics of polymer; fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
12. Dimethanofullerenes: new and efficient acceptors in bulk heterojunction solar cells10.1002/adfm.200500097 ↗
13. Device annealing effect in organic solar cells with blends of regioregular poly (3-hexylthiophene) and soluble fullerene10.1063/1.1861123 ↗
14. effect of annealing on nanomorphology and performance of poly (alkalithiophene) fullurene bulk heterojunction solar cells10.1002/adfm.200601038 ↗
15. Crystal network formation in organic solar cells10.1016/S0927-0248(99)00096-3 ↗
16. Electron trapping in dye/polymer blend photovoltaic cells10.1002/1521-4095(200009)12:17<1270::AID-ADMA1270>3.0.CO;2-8 ↗
17. Effect of annealing on the optical, electrical, and photovoltaic properties of bulk hetero-junction device based on PPAT:TY blend10.1016/j.solmat.2006.09.006 ↗
18. Charge separation and transport in conjugated polymer/semiconductor: nanocrystal composites studied by photoluminescence quenching and photoconductivity10.1103/PhysRevB.54.17628 ↗
19. Charge transport in TiO2/MEH-PPV polymer photovoltaics10.1103/PhysRevB.64.125205 ↗
20. Photoinduced charge transfer in composites of conjugated polymers and semiconductors nanocrystals10.1088/0957-4484/15/1/032 ↗
21. Hybrid polymer solar cells from zinc oxide10.1039/b501979f ↗
22. High open-circuit voltage in UV photovoltaic cell based on polymer/inorganic bilayer structure10.1016/j.chemphys.2006.09.034 ↗
23. Harvest of near infrared light in PbSe nanocrystal–polymer hybrid photovoltaic cells10.1063/1.2201047 ↗
24. Organic solar cells10.1002/adma.19910030303 ↗
25. Effect of functional groups at perylene dimide derivatives on organic photovoltaic application10.1039/B512983D ↗
26. New perylenes for dye sensitization of TiO210.1039/b203260k ↗
27. New perylene derivative dyes for dye-sensitized solar cells10.1016/j.solmat.2006.10.004 ↗
28. Self-assembly of ZnO: from nano-dots to nano-rods10.1002/1521-3773(20020402)41:7<1188::AID-ANIE1188>3.0.CO;2-5 ↗
29. Photocarrier generation and photovoltaic effect in PPHT thin film schottky barrier devices10.1016/S0379-6779(99)00160-5 ↗
30. Electrochemical properties of luminescent polymers and polymer light-emitting electrochemical cells10.1016/S0379-6779(99)00007-7 ↗
31. Electrochemistry and electro-generated chemi-luminescence of films of the conjugated polymer 4-methoxy-(2-ethylhexoxyl)-2,5-polyphenylenevinylene10.1016/0009-2614(94)00716-0 ↗
32. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
33. Photo-physics of substituted polythiophenes10.1021/jp983684u ↗
34. Photovoltaic properties of a conjugated polymer blend of MDMO-PPV and PCNEPV10.1021/cm049917d ↗
35. Device performance and polymer morphology in polymer light emitting diodes: the control of thin film morphology and device quantum efficiency10.1063/1.373062 ↗
36. Solvation induced morphological effects on the polymer/metal contacts10.1063/1.1349859 ↗
37. Solvation-induced morphology effects on the performance of polymer based photovoltaic devices10.1002/1616-3028(200112)11:6<420::AID-ADFM420>3.0.CO;2-K ↗
38. Poly(3-hexylthiophene):TiO2 nano-composites for solar cell applications10.1088/0957-4484/15/9/008 ↗
39. The critical role of solvent evaporation on the roughness of spin-cast polymer films10.1021/ma001440d ↗
40. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
41. Carbon nanotube-conducting-polymer composite nanowires10.1021/la0475977 ↗
42. Light intensity dependence of open circuit voltage of polymer: fullerene solar cells10.1063/1.1889240 ↗
43. Unified description of charge-carrier mobilities in disordered semiconducting polymers10.1103/PhysRevLett.94.206601 ↗
44. Phys. Photocurrent generation in polymer–fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
45. Modeling the current–voltage characteristics of bi-layer polymer photovoltaic devices10.1103/PhysRevB.67.075205 ↗